Cuspated Geomembrane + Geotextile MDP

GE0 009,1 - E – 02/11 TENAX MDP Type: 1200 Geocomposite TENAX MDP geocomposites are a combination of a cuspated geomembrane and a geotextile. The combination of geotextile (filtering action) and cuspated geomembrane (drainage and protection) offers a complete system of “filter - drainage - protection - water proofing". Typical application Waste disposals; underground structures; retaining walls; ground channels; landfill capping. PHYSICAL CHARACTERISTICS TEST METHOD UNIT MDP 1200 NOTESMEMBRANE POLYMER HDPE GEOTEXTILE POLYMER PP U.V. STABILIZER carbon black DIMENSIONAL CHARACTERISTICS TEST METHOD UNIT MDP 1200 NOTESMASS PER UNIT AREA ISO 9864 g/m² 1400 a MEMBRANE THICKNESS ISO 9863 mm 0.5 a THICKNESS at 20 kPa ISO 9863 mm 8.0 a RESIDUAL THICKNESS at 200 kPa ASTM D1621 % > 85 a,b MEMBRANE EDGE mm 40.0 a ROLL WIDTH m 1.50 a ROLL LENGTH m 20.0 a ROLL DIAMETER m 0.48 a ROLL VOLUME m³ 0.37 a GROSS ROLL WEIGHT kg 43.0 a TECHNICAL CHARACTERISTICS TEST METHOD UNIT MDP 1200 NOTESHYDRAULIC FLOW RATE i=1 sv = 50 kPa ISO 12958 m²/s 4.04E-03 a,b,c i=1 sv = 100 kPa ISO 12958 m²/s 3.97E-03 a,b,c i=1 sv = 200 kPa ISO 12958 m²/s 3.85E-03 a,b,c i=1 sv = 500 kPa ISO 12958 m²/s 3.20E-03 a,b,c TENSILE STRENGTH ISO 10319 kN/m 22 a,b ELONGATION AT PEAK ISO 10319 % 60 a,b GEOTEXTILE CHARACTERISTICS TEST METHOD UNIT MDP 1200 NOTESMASS PER UNIT WEIGHT ISO 9864 g/m² 200 a OPENING SIZE ISO 12956 mm 0.10 a NOTES: a) Typical values b) MD: machine direction (longitudinal to the roll) c) 2mm HDPE liner boundary condition Typical Hydraulic Characteristics TENAX MDP 1200 The TENAX Laboratory has been created in 1980 and has been continuously improved with the purpose of assuring unequalled technical development of the products and accurate Quality Control, The TENAX Laboratory can perform mechanical, hydraulic and durability tests, according to the most important international standards like ISO, CEN, ASTM, DIN, BSI, UNI. TENAX SpA Geosynthetics Division Via dell'Industria, 3 I-23897 Viganò (LC) ITALY Tel. +39 039.9219307 Fax +39 039.9219200 e-mail: geo@tenax.net Web Site: www.tenax.net TENAX International B.V. Geosynthetics Division Viale S. Franscini, 19 CH-6900 Lugano SWITZERLAND Tel. +41 091.9233412 Fax +41 091.9237517 e-mail: geo@tenax.ch Web Site: www.tenax.net