Digirator - DR2 - Digital Audio Signal Generator - Leaflet

DigilyzerDigiratorExel Linefor Digital Audio SignalsIntegrity CheckWhen receiving incorrect Channel Status information the behavior of a device could be unpredictable. The In-tegrity Check compares measured pa-rameters with the indicated status and warns if any discrepancies are found.ScopeThe auto trigger and auto ranging scope gives a detailed view of the in-put audio signal in the time domain. DC offset problems and polarity issues are visible. Also ideal for understand-ing sampling peculiarities.Bit StatisticsMeasuring the audio resolution, finding stuck-bit failures and monitoring the activity of the user data bit are some im-portant applications of the bit statistics function. Basic channel status informa-tion is visible on the bottom line.Event LoggerIntermittent faults are usually hard to find. The event logger tracks every change of the input signal (carrier, channel status or audio related) and allows long term checking and highlighting of possible problems.Audio MonitoringBeyond all the measurement power, the built in converter & speaker is one of the most important tool of the DL1. Featuring high quality headphone output, automatic gain control and monitoring of analog input signals.Channel StatusThe complete channel status informa-tion is displayed in an easy-to-under-stand plain text format - according to the latest standards. Interface-carrier frequency and level is available on nearly every screen.THD+N, Level, FrequencyBeside Level Peak measurements, the DL1 is equipped with RMS measure-ment techniques including THD+N and high pass filters, allowing easy verifica-tion and debugging of dual domain devices like AD converters.VU + PPMThe combined vu + PPM meter (vu = volume unit) with numerical maximum hold and over indicators helps identi-fying leveling problems and clipping. Reference grade performance with up to 40 screen updates per second.Frequency SweepThe DL1 automatically triggers to a sweep sequence with any step width and records the frequency response. Any stepped sweep may be used as signal source. After capture all sweep data is available.Digital Audio MonitoringChannel Status AnalysisInterface Carrier MeasurementsDual Domain FunctionsUp to 96 kHz, 24 BitAES3, S/PDIF, TOSLINK & ADATThe Digilyzer DL1 is a powerful but easy to use digital audio analyzer. Testing, monitoring and troubleshooting digital audio interfaces is fast and straight forward using this compact tool. Virtually all digital audio formats including ADAT and sampling frequencies up to 96 kHz are supported. With features like the DL1 unique integrity check, the integrated speaker, event & data logging, audio lens and many more digital audio becomes transparent and easy to debug.Analyzing & debugging digital audio interfaces and signals requires look-ing at completely different parameters at the same time:• Interface carrier related parameters like level & sample frequency• Channel Status - related parameters like professional/consumer mode • Audio related parameters like audible content and levelThe Digilyzer shows all these important parameter at one glance. Addi-tionally, the built in integrity check even alerts if protocol inconsistencies, which could cause serious troubles, are detected.Technical Data Digilyzer DL1 Frame Consumer/Professional, up to 24 bit, Sampling Frequency fs = 32-96 kHz Also supports: Interleaved 96 kHz mode on all inputs (single channel double sampling frequency modes)MeasurementsSignal Level-FS, Level-RMS, Overload Detection, Scope, Signal Frequency, Frequency Sweep, vu+PPM, THD+NInterface Carrier Sampling Frequency (acc. ±2.5 ppm), LevelFrame Channel Status acc. to AES3 (ed. 2003) and IEC 60958-3, Bit Statistics, Consistency CheckEvent Logger Records Signal-, Carrier- and Frame EventsInput Connectors AES3 (110 Ohm) XLR, S/PDIF (RCA), TOSLINK, ADAT, AES3id (75 Ohm) BNC using optional adapter, phantom power resistantMonitor Built-in speaker, headphone connectorDisplay Backlit graphic LCDPower Supply 3x AA size dry batteries (alkaline), typically 8 hours External DC power 7.5 VDCDimensions (LxWxH) 163 x 86 x 42 mm (6.4 x 3.38 x 1.63“)Weight 300 g (10.5 oz) incl. batteriesTemperature 0° to +45° C (32° to 113° F)Order InformationDigilyzer DL1 NTi Audio # 600 000 200Digilyzer DL1 incl. MiniLINK USB PC Interface NTi Audio # 600 000 230 Digital Audio AnalyzerDL1 DIGILYZERThe MiniLINK USB interface transforms the Digilyzer DL1 into an affordable measurement instrument with PC connection. MiniLINK is available as upgrade kit for all existing Digilyzers.MiniLINK supports documentation and data acquisition of the entire analyzer functionality in conjunction with the MiniLINK PC software. Communication and power supply is enabled as soon as the supplied Mini-USB cable is connected to the PC. Alternatively to store data and bitmaps into the analyzers memory, MiniLINK supports online data logging for most measurement functions. MAC compatibility cannot be guaranteed.USB Interface for Digilyzer DL1MiniLINKThe PPM gives an indica- tion of what’s coming inInterface Carrier Measurements:Uncovers inaccurate sample rates, bad car-rier levels and faulty data promptlyMeasurement - in this example the peak level of channel A and B.The “Quick Status” shows you the most important vaules of the re-ceived channel status information.Simple selection of functions, input format and input channel using pull down menus.www.nti-audio.comThis document certifies that the following instrument has been tested and calibrated to themanufacturer specifications. With this calibration are all instrument functions calibrated.• Device Type: Digirator DR2• Serial Number: G2D-DEMTT-C1• Date of Calibration: 17. December 2009• Next Calibration Due: 17. December 2010• Results: PASSED(for detailed report see next page)Tested by: B.GrafSignature:Stamp:Test & Calibration CertificateNTi Audio AG • Im alten Riet 102 • 9494 Schaan • Liechtenstein • Europe • Tel: +423 239 6060 • Fax: +423 239 6089www.nti-audio.com • HR-Nr: 2.012.557 • MwStNr: 54306 • Bank: VP Bank, Vaduz, Acc No: 322.235.015This document certifies that the following instrument has been tested and calibrated to themanufacturer specifications. With this calibration are all instrument functions calibrated.• Device Type: Digirator DR2• Serial Number: G2D-DEMTT-C1• Date of Calibration: 17. December 2009• Next Calibration Due: 17. December 2010• Results: PASSED(for detailed report see next page)Tested by: B.GrafSignature:Stamp:Test & Calibration CertificateNTi Audio AG • Im alten Riet 102 • 9494 Schaan • Liechtenstein • Europe • Tel: +423 239 6060 • Fax: +423 239 6089www.nti-audio.com • HR-Nr: 2.012.557 • MwStNr: 54306 • Bank: VP Bank, Vaduz, Acc No: 322.235.015XLRDR2 DIGIRATORUp to 192 kHz / 24 BitAES3, S/PDIF, TOSLINK & ADATSync Input (AES3, Word Clock, Video)Supports Dolby Digital, E, PL II, DTSChannel Transparency CheckChannel Delay MeasurementThe Digirator DR2 is a reference grade digital audio signal generator with transformer balanced AES3, S/PDIF and ADAT outputs. Beside a comprehensive set of audio test signals, the DR2 also supports surround sound test sequences for verification and adjustment of professional Dolby Digital, Dolby E and DTS installations. The internal low jitter clock generator can be synchronized to AES3, DARS, Word Clock and Video signals. Measurement of channel transparency, channel propagation delay and sample frequency is supported.dt 10.000 06.10Digital Audio Signal GeneratorSine Wave, Noise, PolarityA full range of digital audio test signals for maintenance, repair and calibra-tion of professional audio equipment is generated. User test signals may be stored as uncompressed WAV-files in the DR2 memory. Channel Status MonitoringChannel status information can be generated in professional and consum-er format and the most important pa-rameters may be manipulated manu-ally. Display of incoming channel status data is also supported.Channel Transparency CheckThe DR2 tests whether a transmission channel is transparent for non-linear PCM signals and indicates if Dolby E, Dolby Digital and/or DTS bit streams can pass. This test is also suitable for any digital audio recording device.Channel Delay MeasurementThe propagation delay between any DR2 digital audio output and the XLR sync input (which accepts AES3 signals) may be measured and displayed in sec-onds or video frames. Multi Format SYNC InputThe DR2 accepts AES3, DARS, Word Clock and Video Black Burst (PAL and NTSC) synchronization signals. The input impedance of the sync input may be switched between 75 Ohm, 110 Ohm and High Z. Dolby Digital, Dolby E and DTSThe DR2 wave file player can play back multi-channel bit stream files. A set of 5.1 test sequences for the verification and optimization of surround sound equipment and installations is stored on the unit’s flash disc. Order InformationDigirator DR2 NTi Audio # 600 000 320Includes protective shock jacket, test signal backup DVD, BNC-XLR adapter for word clock input, RCA-BNC adapter for AES3id, hand strap, USB cable, operating manual.Accessories for Digilyzer DL1Mains Power Adaptor for DL1 (EURO Type) NTi Audio # 600 000 210Pouch for DL1 Soft pouch with belt-loop NTi Audio # 600 000 012System Case for DL1, DR2 and accessories NTi Audio # 600 000 020MiniLINK USB PC Inter-face for DL1, Software NTi Audio # 600 000 033Accessories for Digirator DR2Technical Data DR2 Frame Consumer/Professional, up to 24 bit audioOutput XLR, RCA: 32, 44.1, 48, 88.2, 96, 176.4, 192 kHz Sampling Frequency Optical: up to 96 kHz ADAT: up to 48 kHzOutputs • AES3 (110 Ohm) XLR • S/PDIF (75 Ohm) RCA • TOSLINK: Stereo and ADAT • AES3id (75 Ohm) using optional adapterInputs XLR Sync input for: • AES3, DARS • Video (NTSC, PAL) • Word Clock using BNC to XLR adapter (included)Linear PCM Sine, Polarity Test Signal, Delay Test Signal, Wave Forms Pink Noise (crest factor = 4.42), White Noise (crest factor = 3.47), Playback of Wave FilesMulti Channel A comprehensive library of multi channel data streams is supplied in the following formats: • Dolby Digital • DTS • Dolby E • Dolby ProLogic IIWave File Format Sampling freq.: 48 kHz Resolution: 16, 20, 24 Bit, Mono + StereoFrequency Setting Range: 10 Hz - 20 kHz Increment: in 1 digit steps Accuracy: 0.001%Stepped Sweep Freq. range: freely selectable, 10 Hz - 20 kHz Function Increment: 1/1, 1/3, 1/6, 1/12 octave Sweep speed: selectable, 0.5 - 5 seconds per stepContinuous Sweep Freq. range: freely selectable, 20 Hz - 20 kHz (Chirp) Function Increment: Linear / Logarithmic Chirp speed: 1.0 - 99 seconds per cycleLevel Units dBFs, %Output Level Range -100 to 0.00 dBFsTHD+N of generated sine wave: -138 dB (22 Hz - 22 kHz, average, @ 1 kHz, typical)USB Functionality • Firmware update • Mass Storage Device Flash Memory 512 MByte for storing wave files and configurationsDisplay Graphical, with back lightAuto-Power-Off 10, 30, 60 minutes or OFF Batteries 3 x AA Alkaline dry cells or rechargeable equivalents Battery Life: 10 hoursTemperature Range 0° to 45° C (32° to 113° F)Humidity < 90% rel. huidity, non-condensingDimensions (LxWxH) 152 x 81 x 43 mm (incl. protective shock jacket)Weight 310 g (11 oz.) incl. batteriesDigirator DR2 Connectors & FormatsCalibration Certificate for Digilyzer DL1 NTi Audio # 600 000 016Word ClockBlack Burst PAL / NTSCSynchronization InputAES3 DARSOPTICALStereo, ADATAES3 Transformer balancedDigital Audio OutputsS/PDIFTransformer outputXLR TOSLINKRCADC SupplyUSBMains Power Adaptor for DR2 (EURO Type) NTi Audio # 600 000 301Pouch MR2/DR2 Soft pouch with belt-loop NTi Audio # 600 000 302Calibration Certificate for Digirator DR2 NTi Audio # 600 000 323System Case for DL1, DR2 and accessories NTi Audio # 600 000 020Digilyzer, Digirator, MiniLINK, MiniSPL, Minilyzer and Acoustilyzer are trademarks of NTi Audio.All info subject to change without notice.NTi Audio AGIm alten Riet 1029494 SchaanLiechtenstein, Europe Phone +423 / 239 60 60Fax +423 / 239 60 89info@nti-audio.comNTI AmericasPhone +1 503 684 7050Fax +1 503 684 7051 americas@nti-audio.comNTI ChinaPhone +86 512 6802 0075Fax +86 512 6802 0097china@nti-audio.comNTI JapanPhone +81 3 3634 6110Fax +81 3 3634 6160japan@nti-japan.comwww.nti-audio.comThis document certifies that the following instrument has been tested and calibrated to themanufacturer specifications. With this calibration are all instrument functions calibrated.• Device Type: Digirator DR2• Serial Number: G2D-DEMTT-C1• Date of Calibration: 17. December 2009• Next Calibration Due: 17. December 2010• Results: PASSED(for detailed report see next page)Tested by: B.GrafSignature:Stamp:Test & Calibration CertificateNTi Audio AG • Im alten Riet 102 • 9494 Schaan • Liechtenstein • Europe • Tel: +423 239 6060 • Fax: +423 239 6089www.nti-audio.com • HR-Nr: 2.012.557 • MwStNr: 54306 • Bank: VP Bank, Vaduz, Acc No: 322.235.015This document certifies that the following instrument has been tested and calibrated to themanufacturer specifications. With this calibration are all instrument functions calibrated.• Device Type: Digirator DR2• Serial Number: G2D-DEMTT-C1• Date of Calibration: 17. December 2009• Next Calibration Due: 17. December 2010• Results: PASSED(for detailed report see next page)Tested by: B.GrafSignature:Stamp:Test & Calibration CertificateNTi Audio AG • Im alten Riet 102 • 9494 Schaan • Liechtenstein • Europe • Tel: +423 239 6060 • Fax: +423 239 6089www.nti-audio.com • HR-Nr: 2.012.557 • MwStNr: 54306 • Bank: VP Bank, Vaduz, Acc No: 322.235.015XLRXLRDR2 DIGIRATORUp to 192 kHz / 24 BitAES3, S/PDIF, TOSLINK & ADATSync Input (AES3, Word Clock, Video)Supports Dolby Digital, E, PL II, DTSChannel Transparency CheckChannel Delay MeasurementThe Digirator DR2 is a reference grade digital audio signal generator with transformer balanced AES3, S/PDIF and ADAT outputs. Beside a comprehensive set of audio test signals, the DR2 also supports surround sound test sequences for verification and adjustment of professional Dolby Digital, Dolby E and DTS installations. The internal low jitter clock generator can be synchronized to AES3, DARS, Word Clock and Video signals. Measurement of channel transparency, channel propagation delay and sample frequency is supported.dt 10.000 06.10Digital Audio Signal GeneratorSine Wave, Noise, PolarityA full range of digital audio test signals for maintenance, repair and calibra-tion of professional audio equipment is generated. User test signals may be stored as uncompressed WAV-files in the DR2 memory. Channel Status MonitoringChannel status information can be generated in professional and consum-er format and the most important pa-rameters may be manipulated manu-ally. Display of incoming channel status data is also supported.Channel Transparency CheckThe DR2 tests whether a transmission channel is transparent for non-linear PCM signals and indicates if Dolby E, Dolby Digital and/or DTS bit streams can pass. This test is also suitable for any digital audio recording device.Channel Delay MeasurementThe propagation delay between any DR2 digital audio output and the XLR sync input (which accepts AES3 signals) may be measured and displayed in sec-onds or video frames. Multi Format SYNC InputThe DR2 accepts AES3, DARS, Word Clock and Video Black Burst (PAL and NTSC) synchronization signals. The input impedance of the sync input may be switched between 75 Ohm, 110 Ohm and High Z. Dolby Digital, Dolby E and DTSThe DR2 wave file player can play back multi-channel bit stream files. A set of 5.1 test sequences for the verification and optimization of surround sound equipment and installations is stored on the unit’s flash disc. Order InformationDigirator DR2 NTi Audio # 600 000 320Includes protective shock jacket, test signal backup DVD, BNC-XLR adapter for word clock input, RCA-BNC adapter for AES3id, hand strap, USB cable, operating manual.Accessories for Digilyzer DL1Mains Power Adaptor for DL1 (EURO Type) NTi Audio # 600 000 210Pouch for DL1 Soft pouch with belt-loop NTi Audio # 600 000 012System Case for DL1, DR2 and accessories NTi Audio # 600 000 020MiniLINK USB PC Inter-face for DL1, Software NTi Audio # 600 000 033Accessories for Digirator DR2Technical Data DR2 Frame Consumer/Professional, up to 24 bit audioOutput XLR, RCA: 32, 44.1, 48, 88.2, 96, 176.4, 192 kHz Sampling Frequency Optical: up to 96 kHz ADAT: up to 48 kHzOutputs • AES3 (110 Ohm) XLR • S/PDIF (75 Ohm) RCA • TOSLINK: Stereo and ADAT • AES3id (75 Ohm) using optional adapterInputs XLR Sync input for: • AES3, DARS • Video (NTSC, PAL) • Word Clock using BNC to XLR adapter (included)Linear PCM Sine, Polarity Test Signal, Delay Test Signal, Wave Forms Pink Noise (crest factor = 4.42), White Noise (crest factor = 3.47), Playback of Wave FilesMulti Channel A comprehensive library of multi channel data streams is supplied in the following formats: • Dolby Digital • DTS • Dolby E • Dolby ProLogic IIWave File Format Sampling freq.: 48 kHz Resolution: 16, 20, 24 Bit, Mono + StereoFrequency Setting Range: 10 Hz - 20 kHz Increment: in 1 digit steps Accuracy: 0.001%Stepped Sweep Freq. range: freely selectable, 10 Hz - 20 kHz Function Increment: 1/1, 1/3, 1/6, 1/12 octave Sweep speed: selectable, 0.5 - 5 seconds per stepContinuous Sweep Freq. range: freely selectable, 20 Hz - 20 kHz (Chirp) Function Increment: Linear / Logarithmic Chirp speed: 1.0 - 99 seconds per cycleLevel Units dBFs, %Output Level Range -100 to 0.00 dBFsTHD+N of generated sine wave: -138 dB (22 Hz - 22 kHz, average, @ 1 kHz, typical)USB Functionality • Firmware update • Mass Storage Device Flash Memory 512 MByte for storing wave files and configurationsDisplay Graphical, with back lightAuto-Power-Off 10, 30, 60 minutes or OFF Batteries 3 x AA Alkaline dry cells or rechargeable equivalents Battery Life: 10 hoursTemperature Range 0° to 45° C (32° to 113° F)Humidity < 90% rel. huidity, non-condensingDimensions (LxWxH) 152 x 81 x 43 mm (incl. protective shock jacket)Weight 310 g (11 oz.) incl. batteriesDigirator DR2 Connectors & FormatsCalibration Certificate for Digilyzer DL1 NTi Audio # 600 000 016Word ClockBlack Burst PAL / NTSCSynchronization InputAES3 DARSOPTICALStereo, ADATAES3 Transformer balancedDigital Audio OutputsS/PDIFTransformer outputXLR TOSLINKRCADC SupplyUSBMains Power Adaptor for DR2 (EURO Type) NTi Audio # 600 000 301Pouch MR2/DR2 Soft pouch with belt-loop NTi Audio # 600 000 302Calibration Certificate for Digirator DR2 NTi Audio # 600 000 323System Case for DL1, DR2 and accessories NTi Audio # 600 000 020Digilyzer, Digirator, MiniLINK, MiniSPL, Minilyzer and Acoustilyzer are trademarks of NTi Audio.All info subject to change without notice.NTi Audio AGIm alten Riet 1029494 SchaanLiechtenstein, Europe Phone +423 / 239 60 60Fax +423 / 239 60 89info@nti-audio.comNTI AmericasPhone +1 503 684 7050Fax +1 503 684 7051 americas@nti-audio.comNTI ChinaPhone +86 512 6802 0075Fax +86 512 6802 0097china@nti-audio.comNTI JapanPhone +81 3 3634 6110Fax +81 3 3634 6160japan@nti-japan.comExel Linefor Digital Audio SignalsIntegrity CheckWhen receiving incorrect Channel Status information the behavior of a device could be unpredictable. The In-tegrity Check compares measured pa-rameters with the indicated status and warns if any discrepancies are found.ScopeThe auto trigger and auto ranging scope gives a detailed view of the in-put audio signal in the time domain. DC offset problems and polarity issues are visible. Also ideal for understand-ing sampling peculiarities.Bit StatisticsMeasuring the audio resolution, finding stuck-bit failures and monitoring the activity of the user data bit are some im-portant applications of the bit statistics function. Basic channel status informa-tion is visible on the bottom line.Event LoggerIntermittent faults are usually hard to find. The event logger tracks every change of the input signal (carrier, channel status or audio related) and allows long term checking and highlighting of possible problems.Audio MonitoringBeyond all the measurement power, the built in converter & speaker is one of the most important tool of the DL1. Featuring high quality headphone output, automatic gain control and monitoring of analog input signals.Channel StatusThe complete channel status informa-tion is displayed in an easy-to-under-stand plain text format - according to the latest standards. Interface-carrier frequency and level is available on nearly every screen.THD+N, Level, FrequencyBeside Level Peak measurements, the DL1 is equipped with RMS measure-ment techniques including THD+N and high pass filters, allowing easy verifica-tion and debugging of dual domain devices like AD converters.VU + PPMThe combined vu + PPM meter (vu = volume unit) with numerical maximum hold and over indicators helps identi-fying leveling problems and clipping. Reference grade performance with up to 40 screen updates per second.Frequency SweepThe DL1 automatically triggers to a sweep sequence with any step width and records the frequency response. Any stepped sweep may be used as signal source. After capture all sweep data is available.Digital Audio MonitoringChannel Status AnalysisInterface Carrier MeasurementsDual Domain FunctionsUp to 96 kHz, 24 BitAES3, S/PDIF, TOSLINK & ADATThe Digilyzer DL1 is a powerful but easy to use digital audio analyzer. Testing, monitoring and troubleshooting digital audio interfaces is fast and straight forward using this compact tool. Virtually all digital audio formats including ADAT and sampling frequencies up to 96 kHz are supported. With features like the DL1 unique integrity check, the integrated speaker, event & data logging, audio lens and many more digital audio becomes transparent and easy to debug.Analyzing & debugging digital audio interfaces and signals requires look-ing at completely different parameters at the same time:• Interface carrier related parameters like level & sample frequency• Channel Status - related parameters like professional/consumer mode • Audio related parameters like audible content and levelThe Digilyzer shows all these important parameter at one glance. Addi-tionally, the built in integrity check even alerts if protocol inconsistencies, which could cause serious troubles, are detected.Technical Data Digilyzer DL1 Frame Consumer/Professional, up to 24 bit, Sampling Frequency fs = 32-96 kHz Also supports: Interleaved 96 kHz mode on all inputs (single channel double sampling frequency modes)MeasurementsSignal Level-FS, Level-RMS, Overload Detection, Scope, Signal Frequency, Frequency Sweep, vu+PPM, THD+NInterface Carrier Sampling Frequency (acc. ±2.5 ppm), LevelFrame Channel Status acc. to AES3 (ed. 2003) and IEC 60958-3, Bit Statistics, Consistency CheckEvent Logger Records Signal-, Carrier- and Frame EventsInput Connectors AES3 (110 Ohm) XLR, S/PDIF (RCA), TOSLINK, ADAT, AES3id (75 Ohm) BNC using optional adapter, phantom power resistantMonitor Built-in speaker, headphone connectorDisplay Backlit graphic LCDPower Supply 3x AA size dry batteries (alkaline), typically 8 hours External DC power 7.5 VDCDimensions (LxWxH) 163 x 86 x 42 mm (6.4 x 3.38 x 1.63“)Weight 300 g (10.5 oz) incl. batteriesTemperature 0° to +45° C (32° to 113° F)Order InformationDigilyzer DL1 NTi Audio # 600 000 200Digilyzer DL1 incl. MiniLINK USB PC Interface NTi Audio # 600 000 230 Digital Audio AnalyzerDL1 DIGILYZERThe MiniLINK USB interface transforms the Digilyzer DL1 into an affordable measurement instrument with PC connection. MiniLINK is available as upgrade kit for all existing Digilyzers.MiniLINK supports documentation and data acquisition of the entire analyzer functionality in conjunction with the MiniLINK PC software. Communication and power supply is enabled as soon as the supplied Mini-USB cable is connected to the PC. Alternatively to store data and bitmaps into the analyzers memory, MiniLINK supports online data logging for most measurement functions. MAC compatibility cannot be guaranteed.USB Interface for Digilyzer DL1MiniLINKThe PPM gives an indica- tion of what’s coming inInterface Carrier Measurements:Uncovers inaccurate sample rates, bad car-rier levels and faulty data promptlyMeasurement - in this example the peak level of channel A and B.The “Quick Status” shows you the most important vaules of the re-ceived channel status information.Simple selection of functions, input format and input channel using pull down menus.Exel Linefor Digital Audio SignalsIntegrity CheckWhen receiving incorrect Channel Status information the behavior of a device could be unpredictable. The In-tegrity Check compares measured pa-rameters with the indicated status and warns if any discrepancies are found.ScopeThe auto trigger and auto ranging scope gives a detailed view of the in-put audio signal in the time domain. DC offset problems and polarity issues are visible. Also ideal for understand-ing sampling peculiarities.Bit StatisticsMeasuring the audio resolution, finding stuck-bit failures and monitoring the activity of the user data bit are some im-portant applications of the bit statistics function. Basic channel status informa-tion is visible on the bottom line.Event LoggerIntermittent faults are usually hard to find. The event logger tracks every change of the input signal (carrier, channel status or audio related) and allows long term checking and highlighting of possible problems.Audio MonitoringBeyond all the measurement power, the built in converter & speaker is one of the most important tool of the DL1. Featuring high quality headphone output, automatic gain control and monitoring of analog input signals.Channel StatusThe complete channel status informa-tion is displayed in an easy-to-under-stand plain text format - according to the latest standards. Interface-carrier frequency and level is available on nearly every screen.THD+N, Level, FrequencyBeside Level Peak measurements, the DL1 is equipped with RMS measure-ment techniques including THD+N and high pass filters, allowing easy verifica-tion and debugging of dual domain devices like AD converters.VU + PPMThe combined vu + PPM meter (vu = volume unit) with numerical maximum hold and over indicators helps identi-fying leveling problems and clipping. Reference grade performance with up to 40 screen updates per second.Frequency SweepThe DL1 automatically triggers to a sweep sequence with any step width and records the frequency response. Any stepped sweep may be used as signal source. After capture all sweep data is available.Digital Audio MonitoringChannel Status AnalysisInterface Carrier MeasurementsDual Domain FunctionsUp to 96 kHz, 24 BitAES3, S/PDIF, TOSLINK & ADATThe Digilyzer DL1 is a powerful but easy to use digital audio analyzer. Testing, monitoring and troubleshooting digital audio interfaces is fast and straight forward using this compact tool. Virtually all digital audio formats including ADAT and sampling frequencies up to 96 kHz are supported. With features like the DL1 unique integrity check, the integrated speaker, event & data logging, audio lens and many more digital audio becomes transparent and easy to debug.Analyzing & debugging digital audio interfaces and signals requires look-ing at completely different parameters at the same time:• Interface carrier related parameters like level & sample frequency• Channel Status - related parameters like professional/consumer mode • Audio related parameters like audible content and levelThe Digilyzer shows all these important parameter at one glance. Addi-tionally, the built in integrity check even alerts if protocol inconsistencies, which could cause serious troubles, are detected.Technical Data Digilyzer DL1 Frame Consumer/Professional, up to 24 bit, Sampling Frequency fs = 32-96 kHz Also supports: Interleaved 96 kHz mode on all inputs (single channel double sampling frequency modes)MeasurementsSignal Level-FS, Level-RMS, Overload Detection, Scope, Signal Frequency, Frequency Sweep, vu+PPM, THD+NInterface Carrier Sampling Frequency (acc. ±2.5 ppm), LevelFrame Channel Status acc. to AES3 (ed. 2003) and IEC 60958-3, Bit Statistics, Consistency CheckEvent Logger Records Signal-, Carrier- and Frame EventsInput Connectors AES3 (110 Ohm) XLR, S/PDIF (RCA), TOSLINK, ADAT, AES3id (75 Ohm) BNC using optional adapter, phantom power resistantMonitor Built-in speaker, headphone connectorDisplay Backlit graphic LCDPower Supply 3x AA size dry batteries (alkaline), typically 8 hours External DC power 7.5 VDCDimensions (LxWxH) 163 x 86 x 42 mm (6.4 x 3.38 x 1.63“)Weight 300 g (10.5 oz) incl. batteriesTemperature 0° to +45° C (32° to 113° F)Order InformationDigilyzer DL1 NTi Audio # 600 000 200Digilyzer DL1 incl. MiniLINK USB PC Interface NTi Audio # 600 000 230 Digital Audio AnalyzerDL1 DIGILYZERThe MiniLINK USB interface transforms the Digilyzer DL1 into an affordable measurement instrument with PC connection. MiniLINK is available as upgrade kit for all existing Digilyzers.MiniLINK supports documentation and data acquisition of the entire analyzer functionality in conjunction with the MiniLINK PC software. Communication and power supply is enabled as soon as the supplied Mini-USB cable is connected to the PC. Alternatively to store data and bitmaps into the analyzers memory, MiniLINK supports online data logging for most measurement functions. MAC compatibility cannot be guaranteed.USB Interface for Digilyzer DL1MiniLINKThe PPM gives an indica- tion of what’s coming inInterface Carrier Measurements:Uncovers inaccurate sample rates, bad car-rier levels and faulty data promptlyMeasurement - in this example the peak level of channel A and B.The “Quick Status” shows you the most important vaules of the re-ceived channel status information.Simple selection of functions, input format and input channel using pull down menus.www.nti-audio.comThis document certifies that the following instrument has been tested and calibrated to themanufacturer specifications. With this calibration are all instrument functions calibrated.• Device Type: Digirator DR2• Serial Number: G2D-DEMTT-C1• Date of Calibration: 17. December 2009• Next Calibration Due: 17. December 2010• Results: PASSED(for detailed report see next page)Tested by: B.GrafSignature:Stamp:Test & Calibration CertificateNTi Audio AG • Im alten Riet 102 • 9494 Schaan • Liechtenstein • Europe • Tel: +423 239 6060 • Fax: +423 239 6089www.nti-audio.com • HR-Nr: 2.012.557 • MwStNr: 54306 • Bank: VP Bank, Vaduz, Acc No: 322.235.015This document certifies that the following instrument has been tested and calibrated to themanufacturer specifications. With this calibration are all instrument functions calibrated.• Device Type: Digirator DR2• Serial Number: G2D-DEMTT-C1• Date of Calibration: 17. December 2009• Next Calibration Due: 17. December 2010• Results: PASSED(for detailed report see next page)Tested by: B.GrafSignature:Stamp:Test & Calibration CertificateNTi Audio AG • Im alten Riet 102 • 9494 Schaan • Liechtenstein • Europe • Tel: +423 239 6060 • Fax: +423 239 6089www.nti-audio.com • HR-Nr: 2.012.557 • MwStNr: 54306 • Bank: VP Bank, Vaduz, Acc No: 322.235.015XLRDR2 DIGIRATORUp to 192 kHz / 24 BitAES3, S/PDIF, TOSLINK & ADATSync Input (AES3, Word Clock, Video)Supports Dolby Digital, E, PL II, DTSChannel Transparency CheckChannel Delay MeasurementThe Digirator DR2 is a reference grade digital audio signal generator with transformer balanced AES3, S/PDIF and ADAT outputs. Beside a comprehensive set of audio test signals, the DR2 also supports surround sound test sequences for verification and adjustment of professional Dolby Digital, Dolby E and DTS installations. The internal low jitter clock generator can be synchronized to AES3, DARS, Word Clock and Video signals. Measurement of channel transparency, channel propagation delay and sample frequency is supported.dt 10.000 06.10Digital Audio Signal GeneratorSine Wave, Noise, PolarityA full range of digital audio test signals for maintenance, repair and calibra-tion of professional audio equipment is generated. User test signals may be stored as uncompressed WAV-files in the DR2 memory. Channel Status MonitoringChannel status information can be generated in professional and consum-er format and the most important pa-rameters may be manipulated manu-ally. Display of incoming channel status data is also supported.Channel Transparency CheckThe DR2 tests whether a transmission channel is transparent for non-linear PCM signals and indicates if Dolby E, Dolby Digital and/or DTS bit streams can pass. This test is also suitable for any digital audio recording device.Channel Delay MeasurementThe propagation delay between any DR2 digital audio output and the XLR sync input (which accepts AES3 signals) may be measured and displayed in sec-onds or video frames. Multi Format SYNC InputThe DR2 accepts AES3, DARS, Word Clock and Video Black Burst (PAL and NTSC) synchronization signals. The input impedance of the sync input may be switched between 75 Ohm, 110 Ohm and High Z. Dolby Digital, Dolby E and DTSThe DR2 wave file player can play back multi-channel bit stream files. A set of 5.1 test sequences for the verification and optimization of surround sound equipment and installations is stored on the unit’s flash disc. Order InformationDigirator DR2 NTi Audio # 600 000 320Includes protective shock jacket, test signal backup DVD, BNC-XLR adapter for word clock input, RCA-BNC adapter for AES3id, hand strap, USB cable, operating manual.Accessories for Digilyzer DL1Mains Power Adaptor for DL1 (EURO Type) NTi Audio # 600 000 210Pouch for DL1 Soft pouch with belt-loop NTi Audio # 600 000 012System Case for DL1, DR2 and accessories NTi Audio # 600 000 020MiniLINK USB PC Inter-face for DL1, Software NTi Audio # 600 000 033Accessories for Digirator DR2Technical Data DR2 Frame Consumer/Professional, up to 24 bit audioOutput XLR, RCA: 32, 44.1, 48, 88.2, 96, 176.4, 192 kHz Sampling Frequency Optical: up to 96 kHz ADAT: up to 48 kHzOutputs • AES3 (110 Ohm) XLR • S/PDIF (75 Ohm) RCA • TOSLINK: Stereo and ADAT • AES3id (75 Ohm) using optional adapterInputs XLR Sync input for: • AES3, DARS • Video (NTSC, PAL) • Word Clock using BNC to XLR adapter (included)Linear PCM Sine, Polarity Test Signal, Delay Test Signal, Wave Forms Pink Noise (crest factor = 4.42), White Noise (crest factor = 3.47), Playback of Wave FilesMulti Channel A comprehensive library of multi channel data streams is supplied in the following formats: • Dolby Digital • DTS • Dolby E • Dolby ProLogic IIWave File Format Sampling freq.: 48 kHz Resolution: 16, 20, 24 Bit, Mono + StereoFrequency Setting Range: 10 Hz - 20 kHz Increment: in 1 digit steps Accuracy: 0.001%Stepped Sweep Freq. range: freely selectable, 10 Hz - 20 kHz Function Increment: 1/1, 1/3, 1/6, 1/12 octave Sweep speed: selectable, 0.5 - 5 seconds per stepContinuous Sweep Freq. range: freely selectable, 20 Hz - 20 kHz (Chirp) Function Increment: Linear / Logarithmic Chirp speed: 1.0 - 99 seconds per cycleLevel Units dBFs, %Output Level Range -100 to 0.00 dBFsTHD+N of generated sine wave: -138 dB (22 Hz - 22 kHz, average, @ 1 kHz, typical)USB Functionality • Firmware update • Mass Storage Device Flash Memory 512 MByte for storing wave files and configurationsDisplay Graphical, with back lightAuto-Power-Off 10, 30, 60 minutes or OFF Batteries 3 x AA Alkaline dry cells or rechargeable equivalents Battery Life: 10 hoursTemperature Range 0° to 45° C (32° to 113° F)Humidity < 90% rel. huidity, non-condensingDimensions (LxWxH) 152 x 81 x 43 mm (incl. protective shock jacket)Weight 310 g (11 oz.) incl. batteriesDigirator DR2 Connectors & FormatsCalibration Certificate for Digilyzer DL1 NTi Audio # 600 000 016Word ClockBlack Burst PAL / NTSCSynchronization InputAES3 DARSOPTICALStereo, ADATAES3 Transformer balancedDigital Audio OutputsS/PDIFTransformer outputXLR TOSLINKRCADC SupplyUSBMains Power Adaptor for DR2 (EURO Type) NTi Audio # 600 000 301Pouch MR2/DR2 Soft pouch with belt-loop NTi Audio # 600 000 302Calibration Certificate for Digirator DR2 NTi Audio # 600 000 323System Case for DL1, DR2 and accessories NTi Audio # 600 000 020Digilyzer, Digirator, MiniLINK, MiniSPL, Minilyzer and Acoustilyzer are trademarks of NTi Audio.All info subject to change without notice.NTi Audio AGIm alten Riet 1029494 SchaanLiechtenstein, Europe Phone +423 / 239 60 60Fax +423 / 239 60 89info@nti-audio.comNTI AmericasPhone +1 503 684 7050Fax +1 503 684 7051 americas@nti-audio.comNTI ChinaPhone +86 512 6802 0075Fax +86 512 6802 0097china@nti-audio.comNTI JapanPhone +81 3 3634 6110Fax +81 3 3634 6160japan@nti-japan.com