Digirator - DR2 - Digital Audio Signal Generator - Specifications

Technical Data5210. Technical DataFormat Consumer/Professional, up to 24 bit audioSampling Frequen-cies / Outputs XLR, RCA: 32, 44.1, 48, 88.2, 96, 176.4, 192 kHzOptical: up to 96 kHzADAT: up to 48 kHzAccuracy: ± 2.5 ppmOutputs • AES3 (110 ohms) XLR • S/PDIF (75 ohms) RCA • AES3id (75 ohms) with RCA to BNC adapter• TOSLINK: Stereo and ADATInputs XLR Sync. input for: • AES3, DARS • Video (NTSC, PAL) • Word Clock using BNC to XLR adapterLinear PCM Signals Sine, Polarity Test Signal, Delay Test Signal, Pink Noise (crest factor = 4.42), White Noise (crest factor = 3.47), Playback of Wave FilesNon-linear multi-channel signalsA comprehensive library of pre-encoded surround sound signals is available in the following formats: • Dolby Digital • DTS • Dolby E • Dolby ProLogic IIWave File Format Sampling frequency: 48 kHz Resolution: 16, 20, 24 Bit, Mono + StereoFrequency Settings Range: 10 Hz - 20 kHz Step width: min 1 digit steps Accuracy: 0.01%Stepped Sweep FunctionFrequency range: selectable, 10 Hz - 20 kHz Step width: 1/1, 1/3, 1/6, 1/12 octave Sweep speed: selectable, 0.5 - 5 s / stepGliding Sweep (Chirp) FunctionFrequency range: selectable, 20 Hz - 20 kHz Increment: linear / logarithmic Chirp speed: 1.0 - 39 seconds per sweepLevel Units dBFS, %Output Level Range -100 dBFS to 0 dBFSDistortion THD+N of the synthesized sine signal: -138 dB (22 Hz - 22 kHz, AVG, @ 1 kHz, typical)USB Functionality • for firmware update • mass storage deviceFlash Memory • 512 MByte • for storing wave files and configurationsDisplay Graphical, with back illuminationAuto-Power-Off 10, 30, 60 minutes or OFFBatteries • 3 x AA Alkaline dry cells or rechargeable equivalents • Battery life typ. 10 hours (continuous)Temperature Range 0° to 45° C (32° to 113° F)Humidity < 90% rel. humidity, non-condensingDimensions (LxWxH) 152 x 81 x 43 mm (incl. protective shock jacket)Weight 310 g (11 oz.) incl. batteries