DIXI SLK (PDF 52 KB)

SLKThese hydraulic channel balers with a modular design and a fully automatic tie off open up new prospects for market sector specific solutions against mountains of waste and recycling material30 to 60 t compacting forceBale weight of 300 to 600 kgBale length to be set individuallyWaste material in huge quantities and production recyclings require a lot of handling, absorb valuable warehouse spaces and cause considerable expenditures for transportation to the recycling facilitiesThe effective volume reduction leads to a decrease of theses expenditures to a minimum.All important modules of the SLK channel baler product range can be modified perfectly and adjusted to user specific requirements, the selection of performance and capacity according to demand the process related feeding of the waste or recycling material into the baler the variable decision for the correct bale sizeCustomer specific solutionsFeeding by extraction fanFeeding of the baler via conveying beltFeeding by fork lift and tilting containerFeeding station at the conveyor beltDelivery of the ready balesTechnical DetailsLarge inlet hopper with light barrier controlVariable compacting force - via a proportional control valveElectronic setting of bale length of 30 up to 160 cmContinuous, automatic bale outputMicro-processor control with large LCD display and well-arranged soft-touch keyboardSelf-contained, easy accessible hydraulic systemAutomatic tie off - installed alongside, with hydraulic driveMaschinenfabrik Bermatingen GmbH & Co. KGKesselbachstraße 2 - D-88697 BermatingenTel. +49(0)7544 / 9506-0Fax +49(0)7544 / 9506-20service@DIXI-Ballenpressen.dehttp://www.DIXI-Ballenpressen.de/Compacting systems forthe volume reduction ofrecycling materialPrinted: 04.11.2008