Dri-Prime - CD160M - Compact Pump Brochure

CD160M Dri-Prime® PumpFeaturesFully automatic priming from dry to 28' (8.5 m) of suction lift. •Close-coupled centrifugal pump with vacuum priming compressor mounted to a diesel engine. Also available in electric drive or as bareshaft pumpend.• Extensive application flexibility – will handle raw sewage, slurries and liquids with solids up to 3" (75 mm) in diameter.• Dry-running, high pressure oil bath, mechanical seal with high abrasion-resistant silicon carbide interfaces.• Continuously operated Godwin venturi air ejector priming device rfeaturing belt-driven air compressor requiring no form of periodic adjustment or control.• All cast iron construction (stainless steel construction optional) with cast steel impeller.• Standard engine – John Deere 6068T. Available with a variety of engines including Caterpillar, Cummins and Deutz.•CD160MPipe Connections 6" (150 mm) ASA 150#Max. Capacity 1900 GPM (431 m3/h)Max. Head 260' (79.2 m)Solids Handling 3" (75 mm)Impeller Diameter 14" (356 mm)Max. Op. Temp. +176°F (80°C)Max. Working Press. 130 psi (9 BAR)Max. Suct. Press. 72 psi (5 BAR)Max. Casing Press. 195 psi (13.5 BAR)Max. Op. Speed 2000 RPMFuel Tank Capacity 150 gal. (568 l) Fuel Consumption (Full Load, Max. Speed)6.3 GPH @ 1800 RPM (0.02 m3/h)SpecificationsT he Godwin Dri-Prime 6" (150 mm) CD160M pump is an extremely powerful yet compact pump with flow capabilities to 1900 GPM (431 m3/h) and discharge heads to 260' (79.2 m). In addition, the CD160M features the unique Godwin high pressure oil bath mechanical seal design that allows for totally dry running for indefinite periods of time while automatically priming and repriming. Able to perform in the toughest conditions, the CD160M can pass a solid to 3" (75 mm) in diameter, making it a high pressure trash pump as well as a superior dewatering pump. The powerful CD160M has proven itself a pump of choice for mines, quarries, temporary fire pump systems and many other high pressure applications.MaterialsPump Casing & Suction CoverCast ironWearplates Cast iron hardened to minimum Brinell 440 HBPump Shaft 1½% Nickel/chromium steelImpeller Cast chromium steel hardened to Brinell 440 HBNon-Return Valve Flapper High nitrile rubberMechanical Seal Faces Solid silicon carbidePerformance CurveDrawingsCD160MPerformance TableDiesel Set: JD6068T, 147 HP (110 kW) @ 2200 RPMImpeller Diameter: 14" (356 mm)Trailer-mounted JD6068T engineWeight - 6535 lbs. (2964 kg)Total Suction Head - Feet150 175 200 22510 1850 1780 1450 97015 1810 1740 1320 86020 1560 1450 1250 71025 1370 1300 1190 580Output - GPMPerformance data listed in table and curves based on water test at sea level and 68°F (20°C). Maximum ?ows may require larger diameter pipes.Total Delivery Head - Feet45-5/16"1151mm93-3/8"2372mm36"914mm163-3/8"4150mm76-1/4"1937mm16-7/16"418mm30-3/4"781mm25"635mm© Copyright 2007 Godwin Pumps of America, Inc. .cnI ,aciremA fo spmuP niwdoG fo skramedart deretsiger era spmup rof egnaro roloc eht dna emirP-irD ,spmuP niwdoGSpeci?cations and illustrations are subject to revision without notice. Godwin Pumps is not liable for any incompleteness or inaccuracies. Godwin Pumps is not liable for any consequential, incidental or indirect damages relating to these speci?cations or their use.1400RPM1600RPM1800RPM2000RPM10152025303540455055606570758085305070901101301501701902102302502702900 10 20 30 40 50 60 70 80 90 100 110 1200 200 400 600 800 1000 1200 1400 1600 1800 2000FLOWUS GPMM3/Hr.(ft.)(m)TOTAL DYNAMIC HEADAquatech Pump and Power: Phone: 905-907-7852 • Fax: 905-907-1701 Aquatech Dewatering Company: Phone: 905-907-1700 • Fax: 905-907-170169 Connie CrescentConcord, ON L4K 1L3Email us: info@aquatd.com www.aquatd.ca