Dri-Prime - CD225M - Rugged Centrifugal Pump Brochure

CD225MCD225M Dri-Prime® Pumps• Close mounted arrangementcarrying pump and vacuum primingcompressor mounted to a dieselengine or electric motor.• Pumpend available in cast iron,stainless steel and other hardenedmaterials.• Extensive application flexibility —will handle raw sewage, slurriesand liquids with solids up to 3-1/8"(75mm) in diameter.• Continuously operated “Godwin” airejector priming device requiring noform of periodic adjustment orcontrol.• Dry running, high pressure oil bath,mechanical seal with high abrasionresistant silicon carbide interfaces.• Solids handling swing check NonReturn Valve.• Compact unit mounted on a skidbase or two wheeled highwaytrailer both incorporating integralovernight running fuel tank.• Simple maintenance — normallylimited to checking engine andseal cavity oil levels.• Standard John Deere 4045T orCaterpillar 3054TA engine. Alsoavailable with other diesel enginesor electric drive motor.• Silenced units can be supplied.• Balanced unit with centralizedlifting bracket for easy handling.The 8" (200mm) CD225M Dri-Prime is an extremely rugged pump, capable of flow ratesto 3200 gpm (726.4 M3/hr.), total dynamic heads to 180 feet (54.9M), and solids handlingcapabilities up to 3-1/8" (75mm) in diameter. The CD225M also features the unique Godwinhigh pressure oil bath mechanical seal that allows for indefinite dry running, perfect forintermittent flow applications. All of these features come standard on a highly maneuverablehighway trailer or compact skid for convenient use.FeaturesSpecificationsMaximum Operating Speed:2200 rpmMaximum Operating Temperature:+212° F (100° C)Maximum Working Pressure:78.0 psi (5.4 BAR)Maximum Suction Pressure:88 psi (6.1 BAR)Maximum Casing Pressure:117 psi (8.1 BAR)Fuel Tank Capacity:100 gallons (378.5 liters)Fuel Consumption (full load & max. speed):John Deere: 4.9 gph (18.55 lph) @ 2200 rpmCaterpillar 3054TA: 6.6 gph (25.0 lph) @ 2200 rpmPipe Connections:8" (200mm) ASA 150#Solids Handling:3-1/8" (75mm) diameterMaterialsPump Casing, Suction Cover, SeparationTank and Wearplates:Close grained cast ironImpeller:Cast chromium steel hardened to minimumBrinell 341 HBShaft:1-1/2% nickel/chromium steelNon Return Valve Body-Ejector Housing:Close grained cast ironNon Return Valve Flapper:High nitrile rubberMechanical Seal Faces:Solid silicon carbideGPASL.018.903CD225M Performance CurvePerformance TableDiesel Set: John Deere 4045T, 99 hp (74 kw) @ 2200 rpmCaterpillar 3054TA, 108 hp (81 kw) @ 2200 rpmImpeller Diameter – 11 3/8 inches (290 mm)Total Delivery Head — FeetTotal Suction 40 60 80 100Head — Feet Output — GPM15 3000 2950 2640 222020 2700 2600 2350 216025 2510 2300 2110 1610Performance data listed in table and curves based on water tests atsea level and 68° F (20° C). Larger diameter pipes may be required formaximum flows.DimensionsCD225M — shown with John Deere 4045T Engine, Skid BaseWeight: 4966 lbs. (2,252.6 kg.)70" 1,778mm24-3/4" 629mm36-1/4" 921mm 121" 3,073mm23-3/4" 603mm29-3/4" 756mm53" 1,346mm200180160140120100806040200500 1000 1500 2000 2500 3000 3500 40002200 rpm2000 rpm1800 rpm1500 rpmTOTAL DYNAMIC HEADFLOW010203040506051525354555(m) (ft.)0 200 400 500 600 700100 300 800 900USGPMM3/Hr.Dri-Prime® and the color orange for pumps are registered trademarksof Godwin Pumps of America, Inc.Specifications and illustrations are subject to revision without notice.© Copyright 2002-2003 Godwin Pumps of America, Inc.Aquatech has two facets to help you with your site specific needs.For all your Rental and Sales needs call Aquatech Pump and Power Phone: 905-907-7852 Fax: 905-907-1701For full “turn-key” contracting solutions call Aquatech Dewatering Company Phone: 905-907-1700 Fax: 905-907-1701 Email us: info@aquatd.com 69 Connie CrescentConcord, ON L4K 1L3 www.aquatd.ca