Dry-Tec Series - Closed System Dryers Brochure

Via delle Vigne, 166 – 26100 Cremona – Italy Tel (0039) 0372 452589 – Fax (0039) 0372 453820 info@psystemsrl.it - www.psystemsrl.it Series DRY – TEC * * registered request for European patent As you know, every woodworking company produces rejects such as shavings and sawdust, which have to be disposed. Nowadays, thanks to the innovative Series P300, these rejects can be easily turned into pellets, whose markets is always growing. For some years P SYSTEM S.r.l. Automation designs and r4ealizes installations for pellets production. the non-stop investments in research and development let us realize pellets Machines Series P300 with an exclusive hydraulic technology and leading performances. All our customers have recovered the installation costs in few months. We have a technical staff for prompt and direct assistance. All our installations are designed and realized in conformity with the Community Machines Directives and are provided with handbooks and CE mark For information you can visit our website www.psystemsrl.it or call us at N° 0372 452589. THE DRYING SYSTEM IN BASED ON THE TRANSPORT OF MODERATELY HOT AIR, TOGETHER WITH THE MIXING AND BREAKING OF MATERIAL. EVERYTHING HAPPENS UNDER THE NON-STOP CONTROL, EFFECTED BY THE EQUIPPED DETECTOR, OF THE MOISTURE CONTENT OF THE MATERIAL, WHICH CIRCULATES UNTIL THE ACHIEVMENT OF THE DEGREE SET BY THE OPERATOR. ? Planning and study aiming at pellettizing and briquetting. The material, which is usually but not necessarily humid, feeds the hopper in which the moisture detector and the max. level probe are installed. ? Warrant of homogeneity in the drying degree, independently of the By the hydraulic-regulated screw conveyor the material is sent to the difference in the humidification of the entering material’s mixture. mixer-breakers and mixed together with hot air, which comes from the boiler. ? The drying typology is programmed not to damage the material’s Everything is continuously monitored and regulated by the PLC of the features and contents. At the exit the material is ready for the control board. pellettizing or briquetting. The capacities and temperatures of hot air are managed by an Inverter, which controls the main fan. ? The mixing and breaking features homogenise the particle-size of The material sucked up by the fan is separated from the air mixed to the outgoing material.. condensation by one or more cyclones and sent back in hot circulation. When the probe in the hopper registers the presence of material, which ? Extremely easy to use. The automatic cycle is controlled by one button has the same moisture degree set in the PLC, it unloads the product making and by the immediate reading of the parameters on the PC-card’s display. room for the new to be examined. The dried material is conveyed outside by a hydraulic-motorized screw ? The dryer unit is transportable by only one vehicle and it’s assembled and arranged for the discharging on a band, a screw or by pneumatic and working after few hours from delivery. transport. ? Very low costs of installation, since only one technician P SYSTEM is needed for the assistance to the first starting and assembling. ? Technical assistance by INTERNET (INTRANET). ? Safety in working operations thanks to the integrated automation. ? Fire safety thanks to the in direct use of heat sources and the SYSTEMS FOR 250 / 500 / 1000 Kg/h each internal moderate working temperature (max 120 °C). INITIAL MATERIAL: max chips 30x30x5 mm – min 3 mm MAX INITIAL MOISTURE: > 60% ? Conform to the norms in force regarding safety in use and dust emissions WEIGHT AND SIZE: depending on the initial moisture degree in the atmosphere thank to the available range of filters. STANDARD VOLTAGE: 380 V – 50 Hz (different voltage available by request) ? Working automation by reliable and quality hydraulic components.