DS6000 Series - Digital Oscilloscope Datasheet

• Bandwidth 1GHz, 600 MHz• Sample Rate Up to 5 GSa/s• Channels 2 or 4• Memory 140 Mpts(Std.)• Waveform capture rate Up to 180,000 waveforms per second,• Real Time Waveform Record, Replay & Analysis(Std. up to 200,000 frames)• Innovative “UltraVision” technology• A variety of Trigger functions and Automatic measurements with statistics• Support serial bus trigger(Std.) and decoding(Opt.)• Dedicated data search knob“ WaveFinder ”• Battery Option (China Only)• Complete Connectivity: USB, LAN(LXI-C), VGA, AUX, GPIB(Option)• Built-in 1 GBytes Flash Memory• 10.1 inch WVGA(800X480) DisplayDS6000 series adopt many today's new technologies to achieve high performance, abundant features in the same class. It's designed to aim at the requirements of the largest digital oscilloscope market segment from the communications, semiconductor, computing, aerospace defense, instrumentation, research/education, industrial electronics, consumer electronics and automotive industries with its innovative technology, industry leading specifications, powerful trigger functions and broad analysis capabilities. Digital OscilloscopeProduct Dimensions:Width×Height ×Depth=399mm×255.3mm×123.8mm Weight:5.35 kgWaveform capture rate200,000· Deeper Memory Depth(Std.140Mpts)· Higher Waveform capture rate (Up to 180,000 wfms/s)· Real Time waveform Record,Replay & Analysis (Up to 200,000 frames)· Multi-level intensity grading display Models and key SpecsReplay and analyze the recorded waveformsUltraVision: Up to 180K Waveforms/s Waveform capture rateUltraVision: Deeper Memory with Multi-Level intensity grading displayAdvanced math function (user defined)Intuitive icon and soft key operation for simplified testingUser defined Mask,Pass/Fail counts,Stop on Fail,Fail AlarmFind the infrequent problem easilyProvide the capability to see both the panorama and detail simultaneouslyUltraVision: Realtime waveform record,replay, analysis function (std.)200,000 The probes supported by DS6000 series:Model NumberRP2200RP3300RP3500RP5600ARP6150ARP1300HRP1050HRP7150Attenuation Ratio 1:1 or 10:11:1 or 10:110:110:110:1100:11000:1 10:1 Bandwidth1X: DC~7 MHz10X:DC~150 MHz1X: DC~8 MHz10X:DC~350 MHzDC~500 MHzDC~600 MHzDC~1.5 GHzDC~300 MHzDC~50 MHzDC~1.5 GHzInput R1X: 1MO ±2% 10X: 10 MO±2%1X: 1 MO ±2% 10X: 10 MO±2%10 MO±2% 10 MO±2% 500 O±10 O100 MO10 MO±0.5% Differential mode: 50 kO±2% Single ended mode: 24 kO±2%Small signal test (1X) General purpose testSmall signal test (1X) General purpose testGeneral purpose testGeneral purpose testHigh frequency single ended small signal testHigh voltage testHigh voltage testDifferential /Single ended high frequency signal testMax.Input voltage 1X: CAT II 150 V AC 10X: CAT II 300V AC1X: CAT II 150 V AC 10X: CAT II 300V ACCAT II 300VACCAT II 300VACCAT I 10VACCAT I 2000V (DC+AC), CAT II 1500 V (DC+AC)DC: 0~15KV DC AC: pulse <=30 KVp-p AC: sine wave <=10 KVrms30V Peak, CAT IRP2200 150MHz Passive Probe RP3300 350MHz Passive ProbeRecommended applicationsMeasurement History: Show the trend of the parametersStandard serial bus trigger functions(RS232,I2C,SPI,CAN,FlexRay,USB)Optional Serial bus Decording functions support Event Table displayRP6150A 1.5GHz Passive ProbeRP5600A 600MHz Passive Probe RP7150 1.5GHz Active ProbeRP1300H 300MHz High Voltage Probe RP1050H 50MHz High Voltage ProbeRP3500 500MHz Passive ProbeOther accessoriesSample ModeReal Time Sample RateEquivalent Sample RatePeak DetectAveragingHigh ResolutionMemory DepthNumber of ChannelsInput CouplingInput Impedance Probe Attenuation Coefficient Maximum Input Voltage (1MO)Real-time Sample, Equivalent Sample5 GSa/s (single-channel)2.5 Gsa/s (dual-channel) 100 Gsa/s200 ps (single-channel)400 ps (dual-channel)After all the channels finish N samples at the same time, N can be 2, 4, 8, 16, 32, 64, 128, 256, 512, 1024, 2048, 4096 or 8192.12 bits of resolution when =5 µs/div @ 5 GSa/s (or =10 µs/div @ 2.5 GSa/s).single-channel: Auto, 14k pts, 140k pts, 1.4M pts, 14M pts and 140M pts are availabledual-channel: Auto, 7k pts, 70k pts, 700k pts, 7M pts and 70M pts are availableDS6XX4: four channels DS6XX2: two channelsDC, AC or GND (1 MO±1%) || (14 pF±3 pF)or 50 O±1.5%0.01X-1000X,1-2-5 stepMaximum Input Voltage of the Analog ChannelCAT I 300 Vrms, CAT II 100 Vrms, Transient Overvoltage 1000V pkwith RP2200 10:1 probe: CAT II 300 Vrmswith RP3300 10:1 probe: CAT II 300 Vrmswith RP3500 10:1 probe: CAT II 300 Vrmswith RP5600 10:1 probe: CAT II 300 VrmsSampleInputAll the specifications are guaranteed except the parameters marked with “Typical” and the oscilloscope needs to operate for more than 30 minutes under the specified operation temperature.Timebase ScaleTime Base AccuracyTime Base DriftDelay RangeTimebase ModeNumber of XYs Waveform Capture Rate[1]Bandwidth (-3dB)Single-shot BandwidthVertical ResolutionVertical ScaleOffset RangeBandwidth Limit[2]Low Frequency Response(AC Coupling -3dB)Calculated Rise Time[2]DC Gain AccuracyDC Offset AccuracyESD ToleranceChannel to Channel IsolationDS606X: DC to 600 MHzDS610X: DC to 1 GHzDS606X: DC to 600 MHzDS610X: DC to 1 GHz (each channel)8bits, two channels sample at the same time2 mV/div to 5 V/div (1 MO)2 mV/div to 1 V/div (50 O)2 mV/div to 124 mV/div: ± 1.2V (50 O)126 mV/div to 1 V/div: ± 12V (50 O)2 mV/div to 225 mV/div: ± 2V (1MO)230 mV/div to 5 V/div: ± 40V (1MO)20 MHz or 250 MHz=5 Hz (on BNC) DS606X: 600 psDS610X: 400 ps ±2% full scale200 mV/div to 5 V/div: 0.1 div ± 2 mV±0.5% offset value2 mV/div to 195 mV/div: 0.1 div ± 2 mV±1.5% offset value±2 kVDC to maximum band width: >40 dBHorizontalVerticalTriggerTrigger Level RangeTrigger modeHoldoff RangeHigh Frequency Rejection[2]Low Frequency Rejection[2]Edge TriggerEdge TypePulse TriggerPulse ConditionPulse Width RangeSlope TriggerSlope ConditionTime SettingRising, Falling, Rising&FallingPositive Pulse Width (greater than, lower than, within specific interval)Negative Pulse Width (greater than, lower than, within specific interval)4 ns to 4 sPositive Slope (greater than, lower than, within specific interval)Negative Slope (greater than, lower than, within specific interval)10 ns to 1 sInternalEXTAuto, Normal, Single100 ns to 10 s50 kHz 5 kHz ± 6 div from center screen± 0.8 VDS606X: 1 ns/div to 1000 s/divDS610X: 500 ps/div to 1000 s/div= ± 4 ppm= ± 2 ppm/YearPre-trigger (negative delay): =1 screen widthPost-trigger (positive delay): 1 s to 100,000 sY-T, X-Y, Roll, Time Delayed2 simultaneously (four channels model)150,000 wfms (vector display); 180,000 wfms (dots display)DisplayDisplay TypeDisplay ResolutionDisplay ColorPersistence TimeDisplay TypeReal-time ClockI/OStandard PortsPrinter Compatibility10.1 inches (257 mm) TFT LCD display800 Horizontal ×RGB×480 Vertical Pixel160,000 ColorMinimum, 50 ms, 100 ms, 200 ms, 500ms, 1 s, 2 s, 5 s, 10 s, 20 s, InfiniteDots, VectorsTime and Date (user adjustable)USB DEVICE, two USB HOST ports, LAN, VGA Output, 10 MHz Input/Output, Aux output ( TrigOut,Fast, GND, PassFail, Calibration)PictBridgeMeasureCursorAuto MeasurementNumber of MeasurementsMeasurement RangeMeasurement StatisticManual ModeTrack ModeAuto ModeMeasurements of Maximum, Minimum, Peak-Peak Value, Top Value, Bottom Value, Amplitude, Average, Mean Square Root, Overshoot, Pre-shoot, Area, PeriodArea,Frequency, Period, Rise Time, Fall Time, Positive Pulse Width, Negative Pulse Width, Positive Duty Cycle, Negative Duty Cycle, Delay A~B , Delay A~B , Phase A~B , Phase A~BDisplay 5 measurements at the same timeScreen or cursorAverage, Max, Min, Standard Deviation, Number of MeasurementsVoltage Deviation between Cursors (?V)Time Deviation between Cursors (?T)Reciprocal of ?T (Hz) (1/?T)Voltage and Time Values of the Waveform PointAllow to display cursors during auto measurementFrequency Counter Hardware 6 bits frequency counter(channels are selectable)General SpecificationsProbe Compensation OutputOutput Voltage[2]Frequency[2]PowerPower VoltagePowerFuseEnvironmentTemperature RangeCooling MethodHumidity RangeAltitudeSize[3]Weight[4]Note[1]:Maximum value. In single-channel mode, sine signal with 10 ns horizontal scale, 4 div input amplitude and 10 MHz frequency, edge trigger.Note[2]:Typical.Note[3]:Tilt tabs and handle folded, knob height included, front panel cover excluded.Note[4]:DS6104 model, standard configuration.About 3 V, peak-peak1 kHz100-120 V/50Hz/60Hz/400Hz100-240 V/50 Hz/60HzMaximum 150W3 A, T Degree, 250 VOperation: 0?to +50? Non-Operation: -20? to +70? fan coolingUnder +35?: =90% Relative Humidity+35? to +50?: =60% Relative HumidityOperation: under 3,000 metersNon-Operation: under 15,000 metersWidth×Height×Depth = 399.0 mm×255.3 mm×123.8 mmPackage ExcludedPackage Included5.3 kg± 0.2 kg10.8 kg± 1.0 kgMath OperationWaveform OperationFFT Window FunctionFFT DisplayFFT Vertical ScaleLogic OperationMath FunctionNumber of Buses for DecodingDecoding TypeA+B, A-B, A×B, A/B, FFT, Editable Advanced Operation, Logic OperationRectangle, Hanning, Blackman, HammingSplit, Full ScreendB,VrmsAND, OR, NOT, XORIntg, Diff, Log, Exp, Sqrt, Sine, Cosine, Tangent2Parallel (standard), RS232/UART (option), I2C/SPI(option), CAN (option), FlexRay (option)Physical CharacteristicsCalibration IntervalThe recommended calibration interval period is one year.Regulatory InformationElectromagnetic CompatibilitySafety2004/108/EC Execution standard EN 61326-1:2006 EN 61326-2-1:2006UL 61010-1:2004 ; CAN/CSA-C22.2 NO. 61010-1-2004 ;EN 61010-1:2001 ; IEC 61010-1:2001Support standard NTSC, PAL and SECAM broadcasting standards upport 480P,576P,720P,1080P and 1080I high definition standardsH, L, X, Rising Edge, Falling EdgeRS232/UART TriggerTrigger ConditionPolarityBaud RateData BitsTrigger ConditionAddress BitsAddress RangeByte LengthI2C TriggerStart, Error, Check Error, DataNormal,Invert2400bps, 4800bps, 9600bps, 19200bps, 38400bps, 57600bps, 115200bps, User5 bit, 6 bit, 7 bit, 8 bitStart, Restart, Stop, Missing ACK, Address, Data, A&D7 bit, 8 bit ,10 bit0 to 127, 0 to 255,0 to 10231 to 5Video TriggerSignal StandardLine Frequency RangePattern TriggerPattern SettingSPI TriggerTrigger ConditionTimeout ValueData BitsData Line SettingClock EdgeCAN TriggerSignal TypeTrigger ConditionBaud RateSample PointFrame TypeError TypeFlexRay TriggerBaud RateTrigger ConditionUSB TriggerSignal SpeedTrigger conditionCS, Timeout100ns to 1s4 bit to 32 bitH, L, XRising Edge, Falling EdgeRx, Tx, CAN_H, CAN_L, DifferentialSOF, EOF, Frame Type, Frame Error10 kbps, 20 kbps, 33.3 kbps, 50 kbps, 62.5 kbps, 83.3 kbps, 100 kbps, 125 kbps, 250 kbps, 500 kbps, 800 kbps, 1 Mbps, User5% to 95%Data, Remote, Error, OverLoadBit Fail,Answer Error,Check Error,Format Error,Random Error2.5Mb/s, 5Mb/s, 10Mb/sFrame, Symbol, Error, TSSLow Speed, Full SpeedSOP, EOP, RC, Suspended, ExitSuspendOrdering InformationDescriptionDS6104 (1 GHz, 4-channel)DS6102 (1 GHz, dual-channel)DS6064 (600 MHz, 4-channel)DS6062 (600 MHz, dual-channel)Power Cord conforming to the standard of the countryFront Panel CoverUSB Data Cable600MHz BW Passive Probe,4 sets for 4 channel models,2 sets for 2 channel models1.5GHz BW Passive Probe,2 sets for DS6104,1 set for DS6102Quick GuideResource CD (User’s Guide and Application Software)1.5GHz Active Differential Probe500MHz BW Passive Probes(Support all models)600MHz BW Passive Probe(Support all models)1.5GHz BW Passive Probe(Support all models)USB to GPIB ModuleDesk Mount Instrument ArmRack Mount KitRS232/UART Decording kitI2C/SPI Decording kit CAN Decording kitFlexRay Decording kit Order NumberDS6104DS6102DS6064DS6062-FPC-DS-6CB-USB-150RP5600ARP6150A--RP7150RP3500RP5600ARP6150AUSB-GPIBARMRM-DS-6SD-RS232-DS6SD-I2C/SPI-DS6SD-CAN-DS6SD-FlexRay-DS6ModelStandard AccessoriesOptional AccessoriesDecoding OptionsRIGOL® is the registered trademark of RIGOL Technologies, Inc. Product information in this document subject to update without notice. For the latest information about RIGOL's products, applications and services, please contact local RIGOL office or access RIGOL official website: www.rigol.comHeadquarter RIGOL TECHNOLOGIES, INC.No.156,Cai He Village,Sha He Town,Chang Ping District, Beijing,102206 P.R.ChinaTel:+86-10-80706688Fax:+86-10-80705070Email: info@rigol.comUSARIGOL TECHNOLOGIES, USA INC.7401 First Place, Suite NOakwood VillageOH 44146, USAToll free: 877-4-RIGOL-1 x111Tel: 440-232-4488 x111Fax: 440-232-4499Email: beyondmeasure@ rigoltech.comEuropeRIGOL TECHNOLOGIES EU, GmbHLindbergh str. 482178 Puchheim, GermanyTel: +49(0)89-8941895-0Email: info-europe@ rigoltech.comThree-year warranty,excluding probes and accessories.Warranty July,2012