Dumpers Dump-ROLO

The Symbol of ExcellenceHydraulic DumpersWe Build Equipment the Old Fashioned Way ? ?With Pride?Mobile Parts Dumpers are used in a number of locations at this automobile component assemblyfacility to help the employees sort and organize parts during the manufacturing process.Printed on Recycled PaperContainer AttachmentsSide Fork Pockets Bottom Fork Pocket Side/Top Angle Hold DownWheel Capture Side Angles Adjustable Hold-down Bar Hydraulic Hold-down Bar? Cart Attachment or Scoop Custom Designed and Built toMatch Your Specific Cart or Container? Custom Design Assures a Safe and Secure Fit for theCart/Container During Tipping Operation? Container Hold-down Systems to Capture Fork Pockets,Wheels, Side Pockets, or the Top of the Container? Cart/Container Evaluated for a Hold-down System thatMaintains a Secure Fit while Allowing for a Free Flow ofMaterial During the Dumping Process? Manually and Hydraulically Operated Adjustable BarHold-down Systems Available for Dumpers Required toHandle Multiple Cart Sizes? Engineered Systems for Custom Dumpers or SpecialAttachments Including:Extending Dumper ReachRe-direct the Flow of MaterialRegulate the Rate of DischargeCapture an Unusual Style of ContainerThis dumperis equipped with ahydraulic controlledlid that helps theoperator regulatethe flow of materialinto a processingsystem.Up To 135° Heavy Capacity Production DumpersOverheadClearanceFloor LineContainerContainers can be placed directly into the cart attachmentscoop and held in place by side hold-down bars. (See theContainer Attachment Page for Additional Hold-down Options.)This illustration shows an optional funneled attachment thatwill direct the material from the container into a hopper that isnarrower than the container and below the floor level.Standard Model Rolo-1000 Rolo-2000 Rolo-4000 Rolo-6000 Rolo-8000Lift Capacity (Lbs.) 1,000 2,000 4,000 6,000 8,000Dump Height * <0" to 60" <0" to 84" <0 to 84" <0" to 84" <0" to 84"Cylinder(s) (Number) 2 2 2 2 2Power Unit Range 1 HP/1.15 GPM 2 HP/1.85 GPM 2 HP/1.85 GPM 3 HP/3 GPM 3 HP/3 GPMto to to to to5 HP/6 GPM 10 HP/10 GPM 10 HP/10 GPM 10 HP/10 GPM 10 HP/10 GPMCycle Time Range (Sec.)** 26 to 140 20 to 160 34 to 220 34 to 137 41 to 137Notes: * The Rolo style dumpers can be designed with a Dump Height below grade.** Cycle Times are shown in a range due to variances in cylinder lengths and size as determined by dumping heights, and hydraulic oil flow as determined by the power unit.DesignCart Attachment: Scoop designed to fit existing orrequired carts. Can be equipped with a hold downbar, side hold down angles, bottom or side forks,or an adjustable hold down bar (See the Container Attachment Page for AdditionalHold-down Options.)Customized for carts, containers, gaylords, boxes,baskets, totes, barrels, drums or special containersDual cylinder power for stability and a greater liftingcapacityStructural steel frame for stability and durabilityHigh tensile steel pivot shaftHeavy duty bearingsUsesEmpty material from a container into production, recycling or waste handling equipment:On to a conveyorInto smaller containersOn to a sorting tray or tableDirectly into production or processing equipmentUsed extensively in:Automotive parts productionForging facilitiesRecycling operationsDistribution centersFood processingWaste handling OverheadClearanceContainerDumpHeightCarts equipped with casters can be rolled into the cart attachment scoop and held in place by bottom forks, if the cart isequipped with fork pockets. (See the Container Attachment Pagefor Additional Hold-down Options.)This illustration shows a cart that is being emptied above floorlevel. Rolo dumpers can be designed with a dump height up to84". Additional overhead clearance is necessary as the requireddump height increases.135° Light Capacity DumpersOverheadClearanceContainerDumpHeightSmall containers, like the 90 gallon model shown, can be placed directly into the cart attachment and held inplace by side hold-down bars or a mechanism that catchesthe retaining bar on ANSI compliant containers. (See theContainer Attachment Page for Additional Hold-downOptions.)This illustration shows a remote mounted dumper with ascoop attachment that will direct the material from the container into an existing hopper.Standard Model LD-500 LD-1000Lift Capacity (Lbs.) 500 1,000Dump Height 48" to 60" 48" to 60"Cylinder(s) (Number) 1 1Power Unit Range 1 HP/1.15 GPM 1HP/1.15 GPMto to3 HP/3 GPM 3 HP/3 GPMCycle Time Range (Sec.)* 32 to 84 20 to 160Notes: * Cycle Times are shown in a range due to variances in hydraulic oil flow as determined by the power unit.DesignCart Attachment: Designed to fit existing or requiredcarts. Can be equipped with a hold down bar, sidehold down angles, bottom or side forks, anadjustable hold down bar, or a 90 gallon containercatch. (See the Container Attachment Page for AdditionalHold-down Options.)Customized for carts, containers, gaylords, boxes,baskets, totes, barrels, drums or special containersSingle cylinder light duty lifting capacityStructural steel frame for stability and durabilityHeavy duty bearingsUsesEmpty material from a container into production, recycling or waste handling equipment:On to a conveyorInto smaller containersOn to a sorting tray or tableDirectly into production or processing equipmentUsed extensively in:Waste handlingFood processingOverheadClearanceContainerGarbageCompactorThe LD model dumper can be attached directly to the side of a garbage compactor or other material processing equipment to empty small containers, like the90 gallon model shown, directly into the machine?s hopper.The cart is held in place by side hold-down bars or amechanism that catches the retaining bar on ANSI compliant containers. (See the Container Attachment Pagefor Additional Hold-down Options.)150° Heavy Capacity Production DumpersOverheadClearanceContainerDumpHeightCarts can be rolled or containers can be placed directly intothe cart attachment or scoop. (See the Container Attachment Pagefor Hold-down Options.)This illustration shows a remote mounted dumper with a wheeledcart held in place with side hold-down angles. Standard Model* DD-2000 DD-4000Lift Capacity (Lbs.) 2,000 4,000Dump Height 48" to 60" 48" to 60"Cylinder(s) (Number) 1 2Power Unit Range 1 HP/1.15 GPM 1HP/1.15 GPMto to3 HP/3 GPM 5 HP/6 GPMCycle Time Range (Sec.)** 32 to 84 32 to 170Notes: * Maximum cart size for the DD-2000 is 60? long and/or 42? wide.** Cycle Times are shown in a range due to variances in hydraulic oil flow as determined by the power unit.DesignCart Attachment: Scoop or cart attachment designedto fit existing or required carts. Can be equippedwith a hold down bar, side hold down angles, bot-tom or side forks, or an adjustable hold down bar (See the Container Attachment Page for AdditionalHold-down Options.)Customized for carts, containers, gaylords, boxes,baskets, totes, barrels, drums or special containersSingle or dual cylinder medium duty lifting capacityStructural steel frame for stability and durabilityHeavy duty bearingsUsesEmpty material from a container into production, recycling or waste handling equipment:On to a conveyorInto smaller containersOn to a sorting tray or tableDirectly into production or processing equipmentUsed extensively in:Waste handlingRecyclingIndustrial processingFood processingDD-2000 attached to the deck of a stationary garbage compactor emptying trainable, wheeled cartsinto the compaction chamber of the compactor. Thecarts are held in place with a bottom fork pocketattachment.135° Extended Height Light Capacity DumpersOverheadClearanceDumpHeightSupport PostAttached toReceivingStructureContainerCarts can be rolled or containerscan be placed directly into the cartattachment and held in place by sidehold-down bars. (See the ContainerAttachment Page for Additional Hold-down Options.)This illustration shows an optional fun-neled attachment that will direct thematerial from the container into a hopperthat is narrower than the container andbelow the floor level.Standard Model * EHD-1003-LD EHD-1005-LDLift Capacity (Lbs.) 300 500Dump Height 7' to 14' 7' to 14'Cylinder(s) (Number) 1 1Power Unit Range 1 HP/1.15 GPM 1HP/1.15 GPMto to2 HP/1.85 GPM 2 HP/1.85 GPMCycle Time Range (Sec.)** 33 to 53 33 to 53Notes: * The model number will change to indicate the dump height (first two numbers e.g. 09 for 9') and the liftingcapacity (second two numbers e.g. 03 for 300 lbs.).** Cycle Times are shown in a range due to variances in hydraulic oil flow as determined by the power unitand the length of the lifting cylinder.DesignCart Attachment: Scoop designed to fit existing orrequired carts. Can be equipped with a hold downbar or side hold down angles(See the Container Attachment Page for AdditionalHold-down Options.)Customized for carts, containers, boxes, baskets,totes, small barrels or drums or special containersSingle cylinder light duty lifting capacityStructural steel frame for stability and durability mustbe attached to a permanent structureHeavy duty bearings and chainUsesEmpty material from a container into production, recycling or waste handling equipment:On to a conveyorInto a container or trailerDirectly into production or processing equipmentUsed extensively in:Waste handlingRecyclingIndustrial processingFood processing135° Extended Height Heavy Capacity DumpersOverheadClearanceContainerDumpHeightLarger carts can be rolled into theHeavy Capacity Extended HeightDumper scoop and held in place by sidewheel capture bars. (See the ContainerAttachment Page for Additional Hold-down Options.)Extended height dumpers lift then tip acontainer to reduce the required over-head clearance needed by conventionalpivot-only dumpers.DesignCart Attachment: Scoop designed to fit existing orrequired carts. Can be equipped with a hold downbar or side hold down angles(See the Container Attachment Page for AdditionalHold-down Options.)Customized for carts, containers, boxes, baskets,totes, small barrels or drums or special containersSingle cylinder heavy duty lifting capacityStructural steel frame for stability and durability - canbe free-standingHeavy duty bearings and chainUsesEmpty material from a container into production, recycling or waste handling equipment:On to a conveyorInto a container or trailerDirectly into production or processing equipmentUsed extensively in:Waste handlingRecyclingIndustrial processingFood processingCarts are loaded then weighed in aspecial side-load attachment beforebeing emptied into a trailer at this foodprocessing plant.Standard Model * EHD-1010 EHD-1020 EHD-1040Lift Capacity (Lbs.) 1,000 2,000 4,000Dump Height 7? to 14? 7? to 14? 7? to 14?Cylinder(s) (Number) 1 1 1Power Unit Range 2 HP/1.85 GPM 2 HP/1.85 GPM 2 HP/1.85 GPMto to to5 HP/6 GPM 5 HP/6 GPM 5 HP/6 GPMCycle Time Range (Sec.)** 30 to 100 33 to 110 33 to 110Notes: * The model number will change to indicate the dump height (first two numbers e.g. 09 for 9') and the liftingcapacity (second two numbers e.g. 20 for 2,000 lbs.).** Cycle Times are shown in a range due to variances in hydraulic oil flow as determined by the power unitand the length of the lifting cylinder.Industries Inc.Distributed By: SP INDUSTRIES, INC. Phone: 616-793-32322982 Jefferson Rd. Toll Free: 800-592-5959Hopkins, MI 49328 Fax: 616-793-7451Web: sp-industries.com E-mail: info@sp-industries.comNo. Hydraulic Dumper 3/02Custom ApplicationsCAUTION This Equipment Should Be Operated By Properly Trained Personnel. Improper Use,Misuse or Lack of Maintenance could cause injury to people and/or property. Photos used in thisbrochure are illustrative only. Due to its commitment to quality SP Industries' specifications aresubject to change without notice to accommodate improvements to its equipment. Informationcontained within this literature is intended to be the most accurate available at the time of printing.A 2000 lb. capacity Back-feed Dumper canbe attached to a stationary trash compactor toempty carts from the ground at the rear of thecompactor into a hopper on the compactionchamber.This 6,000 lb. capacity 180° ContainerInverter is designed to lift and empty specialprocessing vats.A 1,000 lb. capacity Extended HeightDumper is used at a galvanizing plant totransfer small parts from a 12' deep coolingtank onto a sorting conveyor.This stainless steel Rolo-6000 isdesigned with a custom hydraulic containerlatching mechanism designed for holdingspecial containers during the dumpingprocess.