Electric Mole - Solar Drying Sewage Sludge Plants Brochure

TheTHERMO-SYSTEM SmartDry™The Clever Way of Thermal DryingTHERMO-SYSTEM Sludge Dryers: extraordinate quality, minimum maintenance,excellent energy efficiency12.smartdry.23.04.engl.02The Advantages:Clever The patented matrix-free feeding system provides a save granulation of the sludge without the risk of plugging. All dewatered or even pre-dried sludge with a DS content between 15% and 50% can be dried.RobustOnly high quality components such as stainless steel or special plastic materials are used. Long life-time, high reliability and low maintenance are our main concerns.User-friendlyThanks to our Quick-Start and Quick-Stop function the SmartDry™ can just be switched on and off without removing the sludge. Time consuming start-up and shut-down procedures are a relict of the past. Even temporary unmanned operation is possible.EfficientThe innovative concept grants highest energy efficiency. The typical heat require-ment is not more than 850kWh per ton of evaporated water.QualityThe Key Components are produced in Germany and Switzerland. Quality and reliability are our main concerns.Proven TechnologyOur engineers and suppliers are looking back on many years of experience in the field of thermal sludge drying and have designed some of the world‘s largest ther-mal sludge dryers.Open for the futureYou can convert a SmartDry™ into a BlueDry™ by combining it with our waste-heat assisted SolarPlus™ drying plants. Or you can feed it with pre-dried sludge from solar drying plants. This is increasing the capacity but reducing the specific energy consumption by 50% or moreEco-friendlyProduce electricity instead of CO2 and costs only. You can use 100% of the waste heat from CHP-Stations for sludge drying with our Thermo-System CoGenDry™-concept.Operational SafetyDue to the low drying temperatures between 90 and 150°C and our new control and safety concept according to ATEX regulations, the known risks linked to ther-mal drying are reduced to a minimum.Thermo-System Industrie- und Trocknungstechnik GmbH Echterdinger Straße 57 70794 Filderstadt, Germany Phone: + 49 (0) 711 48 94 59 - 0 Telefax: + 49 (0) 711 48 94 59 - 90 E-mail: info@thermo-system.com Internet: www.thermo-system.com