ESE Welding Smoke Extractors Brochure

International Inc.FOR A HEALTHIER WORK ENVIROMENTAir Filtration ProductsPortable Welding Smoke Extractors4 Standard Low Vacuum Models to choose from for Nozzle applicationsModel ESEIOIA-W ESE201A-W ESEI02A ESE202AAir Flow 80 C.F.M. (135 m3lhr) 160 C.F.M. (270 m3/hr) 80 C.F.M. (135 m3/hr) 160C.F.M. (270 ms/hr)Filtration Efficiency 99.2% 99.2% 99.9997%@ .3 Micron 99.9997%@ .3 Micron(DOP tested HEPA) (DOP tested HEPA)Number of Filters I (EF200A) 1 (EF200A) 2 (EFI00+EF200) 2 (EF I00+EF200)Type of Filters Washable Washable Throwaway ThrowawayMaximum Vacuum 80" W.G. (21 KPA) 80"W.G. (21 KPA) 80"W.G. (21 KPA) 80"W .G. (21 KPA)Number of Motors 1 2 1 2Type of Motors Bypa ss Bypass Bypass BypassVoltale 120 Volts 50/60 HZ 120 Volts 50/60 HZ 120 Volts 50/60 HZ 120 Volts 50/60 HZAmneraze 6.5 amos 13 amos 6.5 amos 13 amosDimensions lengthXwi dthXheight lengthXwidthXheight lengthXwidthXheight lengthXwidthXheight26 \\\\1," X 9 \\\\4" X 14 liz" 26 liz" X 9 \\\\4" X 14 liz" 26 liz"X 9 \\\\4" X 14 liz" 26 liz"X 9 \\\\4" X 14 liz"673mm X 247mm X 368mm 673mm X 247mm X 368mm 673mm X 247mm X 368mm 673m m X 247m m X 368mmWeilht 37Lbs. 41Lbs. 39Lbs. 43Lbs.Hose Lenzth 15ft. (4.6M) 15ft. (4.6M) 15ft. (4.6M) 15ft. (4.6M)Hose I.D. 1%" (45mm) 1%" (45mm) 1%" (45mm) 1%" (45mm)4 High Vacuum Models to choose from for Smoke Exhaust Gun applicationsModel ESEIOIA-W-HV ESE201A-W-HV ESEI02A-HV ESE202A-HVAir Flow 105 C.F.M. (178 m3/hr) 210 C.F.M. (355 m3/hr) 105 C.F.M. (178 m3/hr) 210 C.F.M. (355 m3lhr)Filtration Efficiency 99.2% 99.2% 99.9997%@ .3 Micro n 99.9997%@.3 Micron(DOP tested HEPA) (DOP tested HEPA)Number of Filters I rEF200A) 1 rEF200A) 2 rEFI 00+EF2 00) 2 rEF I00+EF200)Type of Filters Washable Washable Throwaway ThrowawayMaximum Vacuum 100"W .G. (26KPA) 100"W. G. (26KPA) 100"W.G. (26KPA) 100"W .G. (26KPA)Number of Motors 1 2 1 2Type of Motors Bypass Bvnass Bvpass BvnassVoltale 120 Volts 50/60 HZ 120 Volts 50/60 HZ 120 Volts 50/60 HZ 120 Volts 50/60 HZAmneraze 8.5 amos 17 amos 8.5 amos 17 amosDimensions lengthXwid thXh eight lengthXwidthXheight lengthXwidthXheight lengthXwidthXheight26 liz" X 9 \\\\4" X 14 \\\\1," 26 \\\\1," X 9 \\\\4" X 14 liz" 26 liz" X 9 \\\\4" X 14 liz" 26 \\\\1," X 9 \\\\4" X 14 liz"673mm X 247mm X 368mm 673mm X 247mm X 368mm 673mm X 247mm X 368mm 673mm X 247m m X 368mmWeil?:ht 38Lbs . 43Lbs. 40Lb s. 45Lbs.Hose Length 15ft. (4.6M) 15ft. (4.6M) 15ft. (4.6M) 15ft. (4.6M)Hose I.D. 1 'I." (45mm) 1 'I." (45mm) 1 'I." (45mm) 1 'I." (45m m)***Please note Precoat should be used with the Washable Filter(EF200A) only.ECFIOOA (Pair of Charcoal Filters)ENT8 Nozzle (7" wide)ACCESSORIESEN3 NozzleSmoke Exhaust MIG GunPRODUCT DESCRIPTIONThe Enviroflex Smoke Extractors are a lightweight, suitcase sized air cleaner that are very easy to carry .The contaminant is trapped at the source , thus maximizing the protection to the operator by removingcontaminant before it enters the operators breathing area . The unit recycles clean air back into thebuilding thus eliminating additional heating or cooling costs .The unit has been designed to accommodate an optional charcoal filter to eliminate various gases afterthe particulate has been collected.USESThe various models are ideal for maintenance and repair welding or they can utilized with a MIG smokeexhaust gun. The MIG smoke exaust guns are light, easy to maneuver and do not remove the shieldinggas. The various units can also be used for the collection of various hazardous airborne particulates suchas asbestos, stainless steel, silica, carbon dust , fiberglass, galvanized steel, lead oxides etc.UNIT CONSTRUCTI ONThe units are available with (1) or (2) motors and the cabinet is manufactured out of 18 gauge satin coat.The unit is powder coated and the logo and product name are silk-screened onto the sides of each unit.The units are also available in 304 stainless for a corrosive environment(EG salt mine or salt water atmosphere) .The stainless unit is ideal for the renta l trade.Hose : 15ft.lengthis the standardlength(PartNumberEHI75-l5)25ft. length(PartNumberEH175-25)50ft. length(PartNumberEHI75-50)Nozzles : 3" wide nozzlewithbase and magnet(Part NumberEN3)3" wide nozzlewith base, magnetand 1ft.of MetalFlex Duct (PartNumberENT3)8" wide nozzlewith base, magnetand 1ft.of Metal Flex Duct (PartNumberENT8)Carbon Filte r: This is used for odours, gases,ozoneetc. The 2 cassettes (PartNumberECFI00A) fitinsidethe machine betweenthe large filter and the intakemotors."Y" connector: The "Y" Connector is used to run (2) stationsfrom a singleunit (PartNumberis EY1).Pleasenote to keep both lengthsof hose the same. Otherwise the shorterlengthwill drawmore air than the longerlength.Motors: 220 volt 50/60HZ motorsare available.TECHNICAL SERVICESIt is essential that any air cleaner be properly applied for various field applications. Enviroflex has acompetent engineering and technical staff available to solve a variety of air cleaning problems in the field.IN USAEnvirofle x International Inc.1051 Clinton St.Buffalo, N.Y. 14206-2823Phone 716-883-2319Toll Free 1-877-ENV-FLEXFax 716-892-2139Internet www.enviroflex.comEMail info@enviroflex.comIN CANADAEnviroflex International Inc.75 Rosedale Ave. W., Unit 12Brampton Ont. L6X 4H4Phone 905-866-5606Toll Free 1-877-ENV-FLEXFax 905 -866-5602Internet: www.enviroflex.comEMail info@enviroflex.comDISTRIBUTOREnviroflex warran ts all air cleaning products and systems for parts and workmansh ip for a period of one year from date of original purchase. This warranty does not apply toproducts subjecte d to any accident, alteration, abuse or misuse. Warranties on equipment not of seller 's manufacture are limited to terms of warran ty furnished by seller'ssuppliers. All specifica tions are subject to change without notice. Product may not be exactly as illustrated. Button3: