EU-108 Ultrasonic Flow Meter

A .YITE GROUP http://www.ayite.net sales@ayite.net tech@ayite.net EU-108 Separated Fixed Ultrasonic Flowmeter EU-108 Ultrasonic Flow Meter is a fixed mounted flow meter, the flowmeter is separated with the transducer. Their electronic enclosures are rated as IP65 (NEMA 4X), so this products could be installed for both indoor and outdoor, then there will be no limited for the installed place. To meet different require from customer, we design 3 type: EU-108C Wall-Mount Fixed Ultrasonic Flowmeter, EU-108E Explosion-Proof Fixed Ultrasonic Flowmeter, EU-108P Panel-Mount Ultrasonic Flowmeter. The ultrasonic flow meter works with Ultrasonic Technology and Measures by Principle of time difference. There is a pair of ultrasonic vibrator and receiver in the exterior of pipe emitting in two directions and both face to face. The light vibrator will emit ultrasonic signals down stream and reversed stream. Measuring the time difference of the two directions transmission, you will get the flow rate of the fluid; then input the diameter of pipe, you will get the flow. Linearity 0.42% Repeatability 0.17% Accuracy Normally ±0.8% of reading at rates>0.2mps Response Time 0-999 seconds, user-configurable Pipe Size 1/2" ~ 240" (DN15mm - DN6,000mm)* Pipe Material All metals, most plastics, lined pipes Units English (U.S.) or metric Liquid Types Virtually all liquids and liquids with minor solids (<10,000ppm). Full pipes Digital Interface Relay/OCT/RS-485/4~20mA/ 0~20mA output. Power Supply 220V AC / 24VDC / 85~264VAC EU-108C EU-108E EU-108P A .YITE GROUP http://www.ayite.net sales@ayite.net tech@ayite.net Clamp-On Transducer A pair of clamp-on transducer to measure the flow from outside of a pipe, there is no pressure drop, no moving parts, no leaks and no contamination. The installation is very simple and no special skills or tools are required. Standard TS2 DN15~DN100 Standard TM1 DN50~DN700 Standard TL1 DN300~DN6000 High-Temperature S1H DN15~DN100 High-Temperature M1H DN50~DN700 Technical parameters TS2-ype TM1-type TL1-type S1H-type M1H-type Pipe size(mm) DN15-100 DN50-700 DN300-6000 DN15-100 DN50-700 Pipe size(inch) (1/2?~4 )? (2?~28 )? (12?~240 )? (1/2?~4 )? (2?~28 )? Material ABS Special high-temperature materials Frequency 1MHZ Installation method V(N?W) V?Z Z V(N?W) V?Z calibration Calibrate with the main unit magnetism Magnetic No magnetic Application of temperature 32?~158 (0? ?~70 )? 32?~320 (0? ?~160 )? Protection class IP68(can work in water, and water depth=3 meter) Dimension(mm) 45×30×30 60×45×45 80×70×55 90×85×24 90×82×29 weight (g) 75 250 650 94 150 Liquid types Water,sea water.waste water,chemical liquids,oil,crude oil,alcohol,beer,etc. Suspension concentration =20000ppm,may contain very small amount of air bubbles. Pipe material All metals,most plastics,fiber glass,etc, Dedicated shielded transducer cable Shielded transducer cable,can be extended to 500 meter×2,contact the manufacturer for longer cable requirement. Installation impression drawing: