F20 Series Hydra-Cell Pumps Brochure

24 United States Instant Information: www.hydra-cell.com United Kingdom(612) 332-5681 Fax (612) 332-6937 Document Fax Back System: (510) 745-0440 +44 (0) 1252 781234 Fax +44 (0) 1252 781235F-20 SeriesUp to 1 gpm (3.8 l/min)F-20 close coupled for 56C frame motorsF-21 shaft-drivenF-22 flexible coupled to 56C, 143TC and 145 TC frame motors25United States Instant Information: www.hydra-cell.com United Kingdom(612) 332-5681 Fax (612) 332-6937 Document Fax Back System: (510) 745-0440 +44 (0) 1252 781234 Fax +44 (0) 1252 781235F-20 Series Performanceflowmaxmax flow inputmodel* gpm l/min rpmF-20-X 1.00 3.79 1750F-20-E 0.73 2.76 1750F-20-S 0.55 2.08 1750F-20-B 0.33 1.25 1750F-20-G 0.20 0.76 1750pressureMaximum Inlet Pressure:100 psi (6.9 bar)Pressure Variable To:Metallic Pump Heads: F-20: 1000 psi (69 bar) F-21: 1500 psi (103 bar) F-22: 1500 psi (103 bar)Non-Metallic Pump Heads: All Models:250 psi (17.3 bar)* NotePerformance and specification ratings apply toF-20, F21 and F-22 configurations unlessspecifically noted otherwise.2.01.04.00.51.53.52.53.00RPM0 200 400 600 800 1000 1200 1400 1600 1800F-20-EF-20-SF-20-BF-20-GF-20-X100 PSI (6.9 bar)500 PSI (34 bar)1000 PSI (69 bar)1500 PSI (103 bar)Gallons per Minute1.21.00.80.60.40.2Liters per Minute175026 United States Instant Information: www.hydra-cell.com United Kingdom(612) 332-5681 Fax (612) 332-6937 Document Fax Back System: (510) 745-0440 +44 (0) 1252 781234 Fax +44 (0) 1252 781235F-20 Series SpecificationsMaximum Capacity*rpm gpm I/minF-20-X 1750 1.00 3.79F-20-E 1750 0.73 2.76F-20-S 1750 0.55 2.08F-20-B 1750 0.33 1.25F-20-G 1750 0.20 0.76Delivery @ max Rated Pressure*revs/gal revs/literF-20-X 1750 462F-20-E 2397 635F-20-S 3182 841F-20-B 5303 1400F-20-G 8750 2302Max Inlet Pressure 100 psi (6.9 bar)Pressure Variable toMetallic Heads: F-20: 1000 psi (69 bar);F-21 & F-22: 1500 psi (103 bar)Non-Metallic Heads: All Models: 250 psi (17.3 bar)Max TemperatureMetallic Heads: 250°F (121°C) – Consult factory for correctcomponent selection for temperatures above160°F (71°C)Non-Metallic Heads: 140°F (60°C)Inlet Port 1/2 inch NPTDischarge Port 3/8 inch NPTShaft Diameter F-20: 5/8 inch hollow shaft;F-21 & F-22: 5/8 inchShaft Rotation Bi-directionalBearings Ball bearingsOil Capacity 1/8 US quart (0.12 liters), see page 100 for oilselection and specification.WeightMetallic Heads: 12 lbs (5.5 kg)Non-Metallic Heads: 9 lbs (4.1 kg)Dry LiftNet Positive Suction Head (NPSHr)RPM0Lift (feet of water)00.51.01.52.02.53.03.54.0200 400 600 800 1000 1200 1400 1600 18001750F-20-X*F-20-E*F-20-S*F-20-B*F-20-G*Lift (cm of water)20401006080RPM0NPSHr (feet of water)17502468101214161820220 200 400 600 800 1000 1200 1400 1600 1800F-20-X*F-20-E*F-20-S*F-20-B*F-20-G*NPSHr (meters of water)123456* NotePerformance and specification ratings apply to F-20, F21 and F-22configurations unless specifically noted otherwise.For installation guidelines and other pump selection designconsiderations, refer to pages 107-111.Calculating Required Horsepower+2 x rpm63,000gpm x psi1,460= electric motor HP27United States Instant Information: www.hydra-cell.com United Kingdom(612) 332-5681 Fax (612) 332-6937 Document Fax Back System: (510) 745-0440 +44 (0) 1252 781234 Fax +44 (0) 1252 781235F-20 Series DimensionsF-20 Models with Metallic Pumping HeadF-20 Models with Non-metallic Pump HeadBrass316 Stainless SteelHastelloy® CKynar®Polypropylene3.25 (82.6)0.25 (6.4)0.65 (16.5)0.72 (18.3)3.64 (92.5)8.38 (213)2.93 (74.4)4.15 (105)9.72 (247)2.20 (55.9)Inlet 1/2 NPTOutlet 3/8 NPTØ0.42 (10.7)3/8 x 16 UNC (2 x)Ø6.50 (165)Ø5.870 (149)3.25 (82.6)0.25 (6.4)0.65 (16.5)0.72 (18.3)3.64 (92.5)8.63 (219.2)2.93 (74.4)4.15 (105)9.97 (253.2)2.20 (55.9)Inlet 1/2 NPTOutlet 3/8 NPTØ0.42 (10.7)3/8 x 16 UNC (2 x)Ø6.50 (165)Ø5.870 (149)28 United States Instant Information: www.hydra-cell.com United Kingdom(612) 332-5681 Fax (612) 332-6937 Document Fax Back System: (510) 745-0440 +44 (0) 1252 781234 Fax +44 (0) 1252 781235F-20 Series DimensionsF-21 Models with Metallic Pumping HeadF-21 Models with Non-metallic Pump HeadBrass316 Stainless SteelHastelloy® CKynar®Polypropylene2.25 (57.2) 3.45 (87.6)Ø0.625 (15.88)Outlet 3/8 NPTInlet 1/2 NPTØ0.50 (12.7)2.12 (53.8)5.18 (132)8.93 (227)Ø0.33 (8.4) (3) Thru(3) Spot face0.72 (18.3)0.65 (16.5)4.98 (127)2.93 (74.4)4.50 (114)0.96 (24.4) 1.91 (48.5)2.25 (57.2) 3.45 (87.6)Ø0.625 (15.88)Outlet 3/8 NPTInlet 1/2 NPTØ0.50 (12.7)2.12 (53.8)5.18 (132)9.18 (233.2)Ø0.33 (8.4) (3) Thru(3) Spot face0.72 (18.3)0.65 (16.5)4.98 (127)2.93 (74.4)4.50 (114)0.96 (24.4) 1.91 (48.5)29United States Instant Information: www.hydra-cell.com United Kingdom(612) 332-5681 Fax (612) 332-6937 Document Fax Back System: (510) 745-0440 +44 (0) 1252 781234 Fax +44 (0) 1252 781235F-20 Series DimensionsF-22 Models with Metallic Pumping HeadF-22 Models with Non-metallic Pump HeadBrass316 Stainless SteelHastelloy® CKynar®Polypropylene7.09 (180)0.65 (16.5)0.72 (18.3)8.38 (213)2.93 (74.4)4.15 (105)9.72 (247)5.63 (143)Inlet 1/2 NPTOutlet 3/8 NPTØ6.50 (165)Ø5.870 (149)Ø0.42 (10.7) (4 x)7.09 (180)0.65 (16.5)0.72 (18.3)8.63 (219.2)2.93 (74.4)4.15 (105)9.97 (253.2)5.63 (143)Inlet 1/2 NPTOutlet 3/8 NPTØ6.50 (165)Ø5.870 (149)Ø0.42 (10.7) (4 x)– NoteF-22 Pump/Motor Adapterflange ordered separately(see accessories, page 30.)– NoteF-22 Pump/Motor Adapterflange ordered separately(see accessories, page 30.)30 United States Instant Information: www.hydra-cell.com United Kingdom(612) 332-5681 Fax (612) 332-6937 Document Fax Back System: (510) 745-0440 +44 (0) 1252 781234 Fax +44 (0) 1252 781235Materials of ConstructionAll F-20, F-21 and F-22 configurations of Hydra-Cell pumps are manufactured in a variety of heavy-duty materials to meet specific pumping needs. Refer tothe design section for more information on appropriate material selection and chemical compatibility. Other customized materials are available by specialorder. Contact factory application engineering department for further information.Pumping Head316 Stainless SteelBrassKynar®Hastelloy® CPolypropyleneF-20 Series OptionsValve Spring RetainersCelcon®Kynar®NylonPolypropylene17-7 PH Stainless SteelValve Seats17-4 PH Stainless Steel316 Stainless SteelCeramicHastelloy® CTungsten CarbideValve SpringsElgiloy®Hastelloy® CDiaphragms & O-ringsBuna-N-XSEPDMNeopreneTeflon®Viton®-XTValves17-7 PH Stainless SteelCeramicHastelloy® CNitronic 50Tungsten CarbideF-20 Series AccessoriesPump/Motor AdapterPart Number: A04-005-1200Must be ordered separately for F-22 models for use with 56C,143TC, 145TC frame motors.4.00 (101.6)Ø6.50 (165)Ø5.870 (149)Maximum Coupler O.D. 3.25 (82.6)Ø0.42 (10.7) (4 x) Options, Accessories and Custom Designs• Valves, page 84• Couplings, page 95• Hose Connectors, page 99• Hydra-Oil, page 100• Oil Cooler and FilteringSystem, page 102• Oil Reservoir, page 104• Tool Kits, page 10531United States Instant Information: www.hydra-cell.com United Kingdom(612) 332-5681 Fax (612) 332-6937 Document Fax Back System: (510) 745-0440 +44 (0) 1252 781234 Fax +44 (0) 1252 781235F-20 Series How To OrderOrdering InformationA complete F-20 Series Model Number contains 12 digitsincluding 9 customer-specified design options: for example F20XABGSNEPG4 6 7 8 9 10 11 1253211-3 Pump ConfigurationF20 Close-coupled to 56CF21 Shaft-drivenF22 Shaft-coupled to 56C-143/145TC (Note: The F22Pump/motor adapter ordered separately. Seepage 30 for ordering information.)4 Hydraulic End CamX Max 1.00 gpm (3.79 lpm) @ 1750 rpmE Max 0.73 gpm (2.76 lpm) @ 1750 rpmS Max 0.55 gpm (2.08 lpm) @ 1750 rpmB Max 0.33 gpm (1.25 lpm) @ 1750 rpmG Max 0.20 gpm (0.76 lpm) @ 1750 rpm5 Pump Head VersionA Version A Pump Head6 Pump Head MaterialB BrassM Kynar®P PolypropyleneS 316 Stainless SteelT Hastelloy® C7 Diaphragm & O-ring MaterialE EPDM (requires EPDM-compatible oil –Digit 12 oil code J)G Viton®-XTJ Teflon® (available with X and E cams only;cannot be used with non-metallic heads)P NeopreneT Buna-N-XS8 Valve Seat MaterialC CeramicD Tungsten CarbideH 17-4 PH Stainless SteelS 316 Stainless SteelT Hastelloy® C9 Valve MaterialC CeramicD Tungsten CarbideH 17-7 PH Stainless SteelN Nitronic 50T Hastelloy® COrderDigit Code DescriptionOrderDigit Code Description10 Valve SpringsE Elgiloy®T Hastelloy® C11 Valve Spring RetainersC CelconH 17-7 PH Stainless SteelM Kynar®P PolypropyleneY Nylon12 Hydra-OilG 5W30 standard & cold-temp severe duty oilJ 20-wt EPDM-compatible oilK 20-wt food-contact oilReplacement Hydraulic End AssemblyComplete F-20 Hydraulic End Assemblies are available asreplacement items. The Hydraulic End contains all drive endcomponents from the drive shaft up to and including thediaphragms. All Hydraulic Ends are factory tested and shipped withoil. To order a Replacement Hydraulic End, specify the desired Cam(Digit 4), the Diaphragm and O-ring Material (Digit 7), and theHydra-Oil (Digit 12).* Order Code Digits 4, 7 and 12 must be filled in when ordering.Part Number*F20 __ XX __ XXXX __F21 __ XX __ XXXX __F22 __ XX __ XXXX __4* 7* 12*4* 7* 12*4* 7* 12*