Fabri-Tough II Wall Panels Brochure

TECTUM Fabri-Tough II Wall PanelsTectum Fabri-Tough II allowsdesigners to use any woven fabric onsound-deadening Tectum Wall Panels.Custom Fabrics and an 1/8 inch, 18pound density fiberglass board arelaminated to the face of a TectumWall Panel. Fabri-Tough II is perfectfor offices, conference rooms and anyspace where noise reduction isneeded and designer fabrics aredesired.Control noise efficiently,economically and attractively in openplan, closed or mixed-use space withthe Fabri-Tough II Wall Panel System.Efficiently because Tectum panels areknown for sound absorption andabuse-resistance. Economicallybecause these panels arecompetitively priced and will lastlonger than ordinary, soft- basepanels. Attractively because theycome in your choice five designerpatterns and a multitude of fabriccolors that coordinate with popularcontract furnishings.Fabri-Tough II Kerfed Wall Panelshave the fabric wrapped around theedge to the kerf where a plastic splineis inserted for attachment to the wall.Panel ends are square cut but can bewrapped with the fabric as an option.Fabri-Tough II Décor Panels have fullywrapped edges and are attachedusing 20” Z-Clips allowing for panelsto be strategically placed in a space asopposed to consecutive attachment. Fabri-Tough II Wall Panels have aflame spread of 25 or less under theASTM E84 test method. Panelcomponents meet the requirementsof the room corner fire test (UBC 8-2or equivalent) for use in areas notprotected by automatic sprinklers.For panels to be used in recessedareas, some field adjusting may benecessary.P.O. Box 3002Newark, OH 43058105 S. 6th St.Newark, OH 43055www.tectum.com e-mail: info@tectum.com Phone: 888-977-9691 Fax: 800-832-8869Fully wrapped edgeFabri-Tough II Décor WallPanels are easily installedusing Z-Clips. TectumFabri-Tough II Kerfed WallPanels are mounted usingan internal spline. Tectum Fabri-Tough II Wall PanelsEQ Credit 4.1: Low-Emitting Materials, Adhesives and Sealants EQ Credit 4.4: Low-Emitting Materials, Composite Wood & Agrifiber Products EQ Credit 10 (LEED for Schools): Mold Prevention EQ Credit 11 (LEED for Schools): Low-Impact Cleaning and Maintenance Equipment Policy ID Credit 1: Innovation in DesignTectum products are listed in theGreenSpec Directory** published byBuilding Green from the editors ofEnvironmental Building News.For complete information aboutTectum products and LEED, pleasesee our Marketing Bulletins M-81(Tectum Products and LEEDCertification) and M-83 (TectumProducts and LEED Q & A) or ourEnvironmental Statement. All ofthese materials are available onlineat www.tectum.com/leed.*Trademark of The U.S Green Building Council**Trademark of Building Green, Inc.Panel TypeNominalThickness(inches) Actual Size (inches) Edge Detail Factory FinishLightReflectance Flame SpreadWeight LBS/SFFabric Wrapped TectumPanel1” 23 3/4” x 24” to 120” in 12” incrementsLong Edges - Fabricwrapped to Kerf,Ends unfinishedFabric Selection N/A 0-25 2.00Fabric Wrapped TectumPanel1” 23 3/4” x up to 120” in 12” increments47 3/4” x 48”, 72”, 96”Fabric returned atedges to backFabric Selection N/A 0-25 2.00Panel Type 125 250 500 1000 2000 4000 NRC MOUNTING1” .46 .62 .91 .89 .66 .85 .75* ATECTUM ACOUSTICAL PERFORMANCEFABRI-TOUGH II WALL PANEL SYSTEMSOUND ABSORPTION COEFFICIENTSTECTUM PRODUCTwww.tectum.com e-mail: info@tectum.com Phone: 888-977-9691 Fax: 800-832-8869Pub. #T125FABRI-TOUGH II KERFED WALL PANELSFABRI-TOUGH II DECOR PANELS08/12* Fabri-Tough II tested with Guilford FR701 fabric. Results may vary when using other fabrics.reclaiming waste materials sinceproduction began in 1949. Thesecondary binder is composed ofsodium silicate and calciumcarbonate (limestone). All of thewater used in the manufacture ofTectum is captured and recycled.TECTUM PRODUCTS AND LEEDTectum Inc. fully endorses the LEEDGreen Building Rating System. Our products may contribute tothe following LEED credit areas:EA Prerequisite 2: Minimum Energy Performance EA Credit 1: Optimized Energy Performance MR Credit 2: Construction Site Waste ManagementMR Credit 4: Recycled Content MR Credit 5: Regional MaterialsMR Credit 6: Rapidly Renewable ResourcesMR Credit 7: Certified Wood EQ Prerequisite 3 (LEED for Schools): Minimum Acoustical PerformanceEQ Credit 3.1 and 3.2: Construction IAQ PlansThe wood fibers (excelsior) used inTectum panels come from WisconsinAspen trees. The Wisconsin Aspen isa self-propagating type tree. Whencut, a new tree will begin to growback from its root structure. Inaddition, all Wisconsin Aspen usedfor Tectum is air-dried. No dryingkilns are used. The wood is stored inranks to age naturally. No chemicalsare used in the production of anyexcelsior purchased by Tectum Inc. All excelsior used in Tectumproducts comes from a single sourcethat is affiliated with both the ForestStewardship Council (FSC) and theSustainable Forestry Initiatives (SFI)programs. These programs are acomprehensive system of objectivesand performance measures thatintegrate the perpetual growing andharvesting of trees with theprotection of wildlife, plants, soil andwater quality. All loggers are trainedto adhere to FSC and SFI principles.Magnesium oxide is mixed withmagnesium sulfate (Epsom salts) toform the primary binder. Themagnesium sulfate solution hasbeen manufactured on site byENVIRONMENTAL INFORMATION