Firestone - - FlashGard Thru-Wall Flashing Brochure

©2011 Firestone Specialty Products Company LLC. All rights reserved. Printed in U.S.A. ITEM# FG-2000 1/11-01guardyour investment.Introducing Firestone FlashGard Self Adhered Thru-Wall Flashing. As a leading manufacturer of EPDM self adhered products, Firestone now provides the same flexibility and durability in a self adhered thru-wall flashing.Introducing Firestone FlashGard pre-formed accessories which offer faster installation and greater confidence in a weathertight cavity wall. Pre-formed accessories are available in different shapes to accommodate various corner requirements.INTRODUCINGInside Corner 8 x 6 x 6 inches Outside Corner 8 x 6 x 6 inches End Dam 4 x 4 x 6 inches greaterconfidence greaterconfidence greater1. Pre-drill holes to align with termination bar (recommended for use when an extremely long life span of the building is anticipated).2. Apply Firestone Spray Adhesive/Primer 7877 to the substrate and membrane if needed and allow to dry (recommended for use if the surface is soiled or dusty, or if it is difficult to adhere the flashing to the substrate).3. Remove the release paper and install the FlashGard Thru-Wall Flashing Membrane.4. Install the Firestone termination bar.5. Apply the Firestone Lap Sealant HS.Finish. Completed installation of FlashGard Self Adhered Thru-Wall Flashing and accessories.Preparation. Wherever flashing is to be applied, the surface must be smooth, clean, dry and free of voids, sharp protrusions or other matter that will hinder the adhesion or uniformity of the wall flashing installation. Remove loose dust or dirt from the surface by wiping with a clean dry cloth or a brush. The same high quality flashing products installed on the Lucas Oil Stadium are being used to flash residential and commercial buildings throughout the United States.thru-wall FLASHINGFirestone FlashGard Thru-Wall Flashing’s superior performance allows for the durability and flexibility required in the harshest conditions and construction environments. Using EPDM synthetic rubber, FlashGard membrane is highly resistant to weather, ultraviolet radiation, and ozone. It exceeds the expectations of construction professionals involved in many aspects of design, construction, and installation. Architects can be confident that FlashGard’s exceptional durability and aging properties will support their building design.Construction project managers value FlashGard’s excellent UV and weathering resistance capabilities. Installation contractors appreciate FlashGard’s easy installation, which requires no special tools or handling. “We used about 1500 feet of flashing across 5 buildings at the T.W. Moses Water Treat-ment Plant and found the Firestone FlashGard product was easy to install. The Firestone Water Block Sealant is unlike any other product, once you put it together you can’t pull it apart. You really can’t beat it.”-Andy Sipes, Masonry Foreman, Hagerman Construction CorporationUsing standard construction tools, Firestone FlashGard™Thru-Wall Flashing can be easily installed in the mortar bed or attached to a variety of substrates.1. Pre-drill holes to align with termination bar.2. Apply the Firestone Spray Adhesive/Primer 7877 to the substrate and membrane and allow to dry.3. Apply the FlashGard adhesive tape. 4. Install the FlashGard Thru-Wall Flashing membrane.5. Install the Firestone termination bar and apply the Firestone Lap Sealant.6. Apply the Firestone Water Block Sealant.1. Apply the Firestone Spray Adhesive/Primer 7877 to the substrate and membrane and allow to dry.2. Apply the Firestone Water Block Sealant.3. Install the FlashGard Thru-Wall Flashing membrane.4. Apply the Firestone Water Block Sealant.Finish. Completed FlashGard Thru-Wall Flashing installation embedded in mortar joint. Finish. Completed installation of mechanically attached FlashGard Thru-Wall Flashing and accessories.Embedded in Mortar JointMechanically AttachedFlashGard Firestone FlashGard Tape ©2011 Firestone Specialty Products Company LLC. All rights reserved. Printed in U.S.A. ITEM# FG-2000 1/11-01Firestone FlashGard™ Thru-Wall Flashing is a high-performance, flexible membrane used to protect masonry walls from water damage. Its tough, resilient EPDM membrane has excellent thermal and dimensional stability, as well as superior resistance to weathering, ozone and ultraviolet radiation. Construction Schedule Friendly. Strong resistance to UV and ozone. FlashGard flashing can remain exposed on a job site for an extended period, eliminating the need for rework when inevitable construction delays occur.Remains flexible in all temperatures. Year-round installation in all weather conditions from -49º F to the highest temperatures.Job Site Convenience. Install using standard tools. No special tools are required for installation. Puncture and tear resistant. Withstands harsh conditions on a job site.Extremely flexible. Conforms readily to irregular shapes and contours.Installation options. Installs in the mortar bed or attaches to a variety of substrates; can be exposed at the edge or used in conjunction with a drip-edge.Superior Performance.Outstanding expansion and contraction characteristics. FlashGard flashing will move with the building.Highly resistant to corrosion. Compatible with the ever growing number of cavity wall products.Extremely long-lasting and durable. FlashGard flashing will remain flexible for years.Superior performance in high temperatures. Vulcanized membrane remains stable.Available in a variety of sizes. Meets custom construction requirements.Information When You Need It. Current information is available 24/7/365. The Firestone FlashGard website offers everything from guide specifications and technical information sheets to drawings, an installation guide video, and more. Visit www.firestonesp.com for details. PERFORMANCEsuperiorPERFORMANCEsuperiorPERFORMANCEspecialty productsWhere Tradition Meets Technology.As part of the Bridgestone family of companies, Firestone has been a world-recognized leader in rubber polymer technology for over 100 years. Building on this broad legacy, Firestone Specialty Products is a trusted name in thru-wall flashing made from EPDM synthetic rubber. Our knowledgeable staff and network of distributors provide an unmatched level of service and support to architects, specifiers, construction project managers, and installation contractors. Quality and Responsibility.At Firestone Specialty Products, we are equally dedicated to our clients and our community. While producing superior products and systems designed to exceed our customers’ expectations is an ongoing goal, we believe environmental, health, and safety issues are just as important to building a successful and socially responsible business. Firestone Specialty Products continually strives to maintain stringent manufacturing processes, improve our environmental management systems and take an active role in our surrounding communities. Firestone Specialty Products Delivers. Firestone Specialty Products is also committed to providing unsurpassed product availability and training. With a worldwide network of distributors, you can rest assured that all orders are handled properly. If a question or concern arises, a Firestone representative is always close at hand. To find a distributor or training seminar near you or to request samples and information, call 1-800-428-4442, visit www.firestonesp.com or email info@firestonesp.com.©2011 Firestone Specialty Products Company LLC. All rights reserved. Printed in U.S.A. ITEM# FG-2000 1/11-01(800) 428-4442 www.firestonesp.com info@firestonesp.comwww.hardingpoorman.comHPG Uses 100% Green Power.MANUFACTURED WITH 100% WIND ENERGYtraditionspecialtytraditionspecialty productstraditionproducts+products+productstechnologyproductstechnologyproductsqualityspecialtyqualityspecialty+specialty+specialtyresponsibilityspecialtyresponsibilityspecialty productsresponsibilityproductsThis green product printed on recycled paper using Soy Inks and manufactured using 100% Wind Power.