Flomotion Systems - BE6200 Series - Ultrasonic Clamp-On Flowmeter DataSheet

ULTRASONIC FLOWMETERBE6200 SERIESULTRASONIC CLAMP-ON FLOWMETEREconomical Transit-Time flowmeter combines ease of installation with high accuracy in closed pipes.Clamp-on type ultrasonic flowmeters offer the the simplest and easiest installation of any flowmeter. The BE6200 series transit-time flowmeter is no exception and installs in minutes. A pair of rugged transducers mounts easily to the outside of the pipe using standard clamping straps.The transducers are non-intrusive, therefore there is no pressure drop or flow obstruction. The advanced microprocessor utilizes the latest in ultrasonic direct time measurement with a resolution of 0.2 nanoseconds. Coupled with state-of-the-art data processing the BE6200 series provides a high level of linearity.Various inputs and outputs are availble to interface with a wide variety of control and reporting systems. Remote programming is available via the standard RS232C port.• Pipe sizes from 0.75 to 120 in. (20 - 3000mm). • Velocities from -53 to +53 fps (-16 to + 16 m/s). • Accuracy to 1.0%, repeatability to ±0.2%. • Easy to install clamp-on transducers are compatible with plastics, steel, stainless steel, cast iron, concrete, other materials. • Outputs: 4-20mA, 0-20mA, frequency, relay, serial communications.• 2 line x 20 digit backlight LCD display & integral 16 button keypad.TYPICAL APPLICATIONSThe speed of sound travelling between the two transducers varies with liquid velocity. A time-differential relationship conversion to flow rate is based on the velocity as well as the pipe diameter.The large easy-to-read display and integral keypad make the BE6200 series easy to program even for the novice.BE6200 FEATURES• Potable Water• Wastewater, Influent & effluent• River & Sea Water• Irrigation • Cooling Tower• De-Ionized Water• Chemicals• Oils• Juices• Milk• Wine• Syrups FLOMOTION SYSTEMS Inc. 165 Creekside Drive, Suite 112 Buffalo NY 14228 Tel: 716-691-3941 Fax: 716-691-1253 Email: info@flomotionsystems.com www.flomotionsystems.com© COPYRIGHT 2006 FLOMOTION SYSTEMS INC. PGS CS2 030410FLOMOTION BE6200 SERIES ENGINEERING SPECIFICATIONSClassification Performance/ParameterPipe Materials Steel, Stainless Steel, Cast Iron, Plastics, Concrete, etc.Inner Diameter 0.75 to 120 in. (20 ~ 3000mm)Straight Pipe Section Re-quirement10D upstream, 5D downstreamFluid Types Clean, sonically conductiveTurbidity Less than 10,000ppm (mg/l) with a low level of air bubble contentTemperature -4° to 220° F (-20° to 105° C) Flow Velocity -53 to +53 fps (-16 to +16 m/s)Trans-ducerTypical Pipe Size Ranges - consult factory for extended rangesS1: 0.75 to 4 in. (20 ~ 100mm)M1: 2 to 24 in. (50 ~ 600mm)L1: 12 to 120 in. (300 ~ 3000mm)Mounting Method ‘V’ method: Suitable for pipe sizes 16 in. (400mm) or smaller‘Z’ method: Suitable for pipe sizes 10 in. (250mm) or largerCable Length 16 ft (5m) Std. (longer lengths available)FlowComputerDisplay Alphanumeric 2 x 20 digit backlight LCDKeyboard 16 button keypadMounting Wall Mount or optional Panel MountOutput 4-20mA or 0-20mA analog output, frequency output (12-9999Hz), relay, serial output.PowerWall Mount: 120VAC & 24VDCPanel Type: 120VACDimension Wall Mount: 9.3 x 7.3 x 4.9 in.Weight 7 lbs. (3kg) Wall MountOperating ConditionTemperature Flow Computer: -4 to 158º F (-20 to 70º C)Transducer: -4° to 220° F (-20° to 105° C) HumidityFlow Computer: 85% RH at 104º F (40º C)Transducer: 98% RH at 104º F (40º C) (Able to operate immersed in water depth smaller than 3m)Perfor-manceAccuracy ±1.0% of reading above ±1 fpsRepeatability ±0.2% at 1 to 53 fps (0.3 ~ 16m/s)Linearity 0.5%DIMENSIONS BE6200 SENSOR CHOICES