Franklin - - Submonitor Brochure

SUBMONITOR THREE-PHASE PROTECTIONMotorsDrivesControlsProtectionSpecifications:Model NumberPremium Package ................................ 586 000 5100 Standard Unit ......................................586 000 5000 Display Only ........................................... 225 190 902 Base Only ............................................... 225 210 902Input Voltage ....................................... 190 – 600 VACFrequency ........................................................60/50 HzMotor Service Factor Amps ...............5 to 350 AmpsMaximum Conductor Size Through Sensors Max Diameter ............................... 0.920 in. (23 mm)Trip ResponseMotor Under/Overload, Under/Overvoltage, Overheat, Unbalance ................................3 secondsControl Circuit Rating ............................ 1.5 Amp AC, up to 600 voltsSignal Circuit Rating ............................1 Amp AC, up to 250 volts (Incandescent lamp: 100 watts max)Wiring Terminals Wire Gauge .....................................#12 to #18 AWG Tighten to ...................................................4.5 in-lbsWeight (SubMonitor)............................ 3.3 lbs/1.5 kgCarton Size (Std. Unit) .......7.75 in x 11.5 in x 6.75 in (19.7 cm x 29.2 cm x 17.1 cm)Shipping Weight (Std. Unit) ............... 3.5 lbs/1.5 kgAgency Approval ...................................UL 508 ListedWith Franklin Electric’s SubMonitor, you can protect against adverse conditions such as low-flow wells, pump damage, clogging, bound pumps and power mishaps. SubMonitor is designed to protect three-phase motor and pump systems with ratings between 3 and 200 hp.Current, voltage and motor temperature are monitored using three integrated current transformers. A digital display provides current and voltage readings for all three legs and allows the user to set up the SubMonitor quickly and easily. Data can be downloaded to a PC using Franklin’s D3 device.SubMonitor protects against: n Under/Overload n False Start (Chattering) n Overheated Motor (Subtrol-equipped) n Under/Overvoltage n Current Unbalance n Phase Reversal*This product is lead free.Get the Most From Your 3-phase Motor7.0 in. (17.8 cm)3.0 in. (7.6 cm)8.0 in. (20.3 cm) 8.0 in. (20.3 cm)4.30 in. (10.9 cm)5.70 in. (14.5 cm)4.0 in. (10.16 cm)5.35 in. (13.6 cm)400 East Spring Street, Bluffton, Indiana 46714 • Tel: 260.824.2900 Fax: 260.824.2909 • www.franklin-electric.comBase UnitDetachable Display UnitThe base unit contains the current sensors and the electronics that monitor motor leads. It can operate independently of the detachable head. n Can be mounted with 4 screws or with DIN rail. n Integrated current transformers. n Dual-colored fault light indicates. • Green ...................... OK (system is operating normally) • Red .......................... TRIPPED (a fault has occurred) n Power, control and alarm terminal connectors are removable for easy access. n Port for communication cable between base and display. n Reset button allows manual restart after a trip has occurred.The detachable display unit displays and stores data it receives from the base unit. A communication cable connects the display to the base unit. n Easy menu-driven setup and adjustment of monitoring parameters. n Real time display of voltage and current for each leg. n Can be mounted on panel door for easy access (mounting kit available). n NEMA 3R enclosure. n Password protection option. n Fault light can be seen from a distance – indicates that a trip has occurred and that a fault message is being displayed. n Turn-and-push adjustment knob. n 502-event history (downloadable to PC with optional D3 unit – sold separately).M1470 02.12