Turnkey Instruments Ltd
  1. Companies & Suppliers
  2. Turnkey Instruments Ltd
  3. Downloads
  4. g-meter+ - With PC Software & Optional ...

g-meter+ - With PC Software & Optional Printer Datasheet

complete testing solutions fromTurnkey InstrumentsTURNKEY INSTRUMENTS LTD1-2 Dalby Court, Gadbrook Business Centre, Northwich, Cheshire. CW9 7TNTel: +44 (0)1606 44520 Fax: +44 (0)1606 331526E-mail: shop@turnkey-instruments.com Website: www.turnkey-instruments.com g-meter+with pc software & optional printer TURNKEY INSTRUMENTS LTD1-2 Dalby Court, Gadbrook Business Centre, Northwich, Cheshire. CW9 7TNTel: +44 (0)1606 44520 Fax: +44 (0)1606 331526E-mail: shop@turnkey-instruments.com Website: www.turnkey-instruments.com The g-meter+ is designed for statutoryannual MOT brake performance testing ofclass III, IV, V, VI & VII vehicles in accordancewith the Motor (Tests) Regulations 1981, asamended. It can also be used for statutoryMOT brake performance testing of HeavyGoods Vehicles in accordance with theGoods Vehicles (Plating and Testing)Regulations 1988, as amended.The test reading is shown on a bright LEDdisplay as Brake Efficiency in percent orthe deceleration in metres per second persecond.The electronic deceleration sensor used ing-meter+ gives it a number of advantagesover older electronic devices andmechanical pendulums, namely:• It is self-aligning and will automatically sense the direction of travel. Precise alignment of the instrument with the direction is, therefore, not necessary.• Its memory can record 3 sets of test results; for example, for main, secondary and parking brake tests. These are retained even if the instrument is switchedoff.• It has an internal clock to accurately record the time and date of each test.• It measures the peak deceleration, mean deceleration and stopping time and then calculates speed and stopping distance.• It determines any left-right pull sensed during the brake test.Sensing principleMeasurement rangeAccuracyLED ResolutionDisplayPeak readingtime constantStart windowBrake thresholdTilt compensationBatteryBattery lifeInterfacePrinterMemorySizeWeightCalibrationSpecificationMulti-axis electronicdecelorometer0 to 2.0gg=9.81 metre/sec/secBetter than ±3%g1%g0.1 metre/sec/sec2 digit, 7 segment LEDReadable in sunlight0.2 seconds0.5 seconds10%g2.5 degrees per g9V PP3 alkalineMN1604 or 6LR61CR2032 Lithium cellPP3: 20 hours approx.CR2032: 10 yearsRS232CTurnkey AP13003 tests122mm octagon24mm deep300 gramsMultipoint calibration,UKAS traceable© 2005, Turnkey Instruments LtdIssue 2, February 2004Changes may be made without notice. E. & O.E.g-meter+with pc software & optional printer
Most popular related searches