Gamajet V Brochure

GAMAJET®CLEANING SYSTEMS,IN C.Product DataGamajet V Tank CleanerGAMAJET CLEANING SYSTEMS, INC.A faster, easier way to clean small tanks.The new Gamajet V’s compact size readily passes through a 3 inch open-ing, making it ideal for cleaning small tanks, vats and vessels.Gamajet V offers the cleaning power and flexibility you need.It surpasses spray balls, water blasting, boil outs, manual hose, and scrapingand chipping.The Gamajet V (patent pending) is a fluid-driven, rotary tank cleaningmachine designed to fit through small passageways and to clean smallervessels (up to 15' in diameter by 15' high). It revolves 360° in both thehorizontal and vertical planes, with synchronized solid jets providing a tightand thorough scouring pattern on the inside tank surfaces in just one completecycle. Its horizontal and vertical rotation patterns are interlocked and controlledby gears, not by any reaction forces. A choice of nozzle sizes, turbines andgear speeds offers a range of flow rates, pressures and wash cycle times.n Weighs 7 lbs., measures less than 9 inchesn Fluid driven, no external motor n Fast, low cost, reliable operationn Thorough cleaning at low/mediumpressures and volumesn Readily passes thru 3"opening;ideal for tote tanks and other smaller tanksn Sealed gearbox design, interlocking gears n No time-wasting adjustments or disassemblyDimensions:n Height: 8.85" (22.5 cm)n Body Diameter: 2.06" (5.23 cm)n Overall Width: 2.95" (7.49 cm) including Nozzle Housingn Clearance: 3.00" (7.62 cm) minimum passageway I.D.Weight: 7 pounds (3.18 kg)Operating Range:n Pressure: 50 to 1200+ PSI (3.5 to 84.4+ kg/cm2)n Temperature: 32° to 250°F (0° to 121° C)n Flow Rate: 6.7 to 42+ GPM (25.4 to 159+ lpm)n Wash Cycle Time: 3 minutes to 33 minutes1-877-426-25381 - 8 7 7 - G A M A J E T604 Jeffers Circle • Exton, PA 19341 • Telephone: (610) 408-9940Fax: (610) 408-9945 • e-mail: sales@gamajet.com • Visit our web site at www.gamajet.comP R O D U C T D A T AInlet Connection: 1 1/4" NPT-Female.Construction - Design: Parts are machined from 316-L Stainless Steel investment castings or bar stock. Impeller & Final Shafts: For increased wear resistance, the impeller and final shafts are plasma-sprayed with a Chromium Oxide coating on Stainless Steel.Shaft & Gearbox Bushings: Turbine shaft thrust is absorbed by a Tungsten carbide bushing.Gearbox bushings are carbon-filled Teflon or other non-cupric material.Bearings: Bearings in the rotating tee and nozzle housings are self- lubricating, carbon-fiber-reinforced polyphenylene sulfide.Bearing Cups: Main body castings are protected by replaceable 316-L StainlessSteel cups for extended frictional wear life.Static Seals: O-Ring materials are selected for each application. Viton is standard with Kalrez, Zalak and EPDM available.Other materials can be supplied on special order.Dynamic Seals: Rotary shaft and housing seals are spring-loaded, double-lipped and made of PTFE. They are reinforced forextra long wear and protection against leakage, abrasion and deposit build-up.Nozzles: Dual 0.110" (2.79 mm), 0.125" (3.18 mm), 0.135" (3.43 mm), 0.150" (3.81 mm), 0.165" (4.19 mm), 0.187” (4.75 mm) and 0.200" (5.08 mm) orifice diameters. Longer nozzles are available for tough deposits, but require a 3 1/2" opening. Other nozzle sizes available upon request.Drive Mechanism: The wash fluid enters the Gamajet at the inlet collar where it encounters and spins turbine blades. The turbine blades are attached to the top of the drive or rotor shaft, the bottom of this shaft is connected tothe inside of a sealed planetary gearhead which then turns the body in the horizontal plane and the nozzles in the vertical plane.Planetary Gearhead: The sealed planetary gearhead has an external casing made of steel, surface-anodized to become stainless.This sealed gearhead is located inside the gearbox, which itself is sealed, and thus does not require any lubricant. All internal parts are hardened sintered steel, the end caps and the output shaft are stainless steel.Lubricant: A high temperature food grade grease (Haloguard FG-2) is inside the sealed gearhead casing. No customer-supplied or user-maintained lubricant is needed.Gear Ratios: Fast, medium (standard) and slow planetary gearheads are supplied.Operating & Maintenance: Complete operating and maintenance procedures are covered in a detailed instruction manual furnished with allmachines. Ready availability of spare parts or kits and ease of on-site maintenance minimizes the need forrepairs. Prompt factory overhaul or repair service is always available. Replacement parts are stocked year round.Special 24-48 hour delivery available upon request at no extra charge.Warranty: Gamajets are warranted for eighteen months from the date of shipment against any defects in workmanship or materials. Normal maintenance parts such as O-rings, bearings, bushings, and seals are not included under this warranty, nor is damage caused by dropping, use of destructively corrosive fluids, or other abuse. This warranty shall not apply to any malfunction resulting from use of non-Gamajet replacement parts purchased from any source otherthan Gamajet or an authorized Gamajet distributor. For full details, see Gamajet “Terms and Conditions of Sale”.Gamajet VThe Gamajet V easily passes through a3-inch opening and is just one of theGamajet family of products, designedto meet every cleaning need.GAMAJET CLEANING SYSTEMS, INC.because your business depends on clean tanks1-877-426-25381 - 8 7 7 - G A M A J E T©2006 Gamajet Cleaning Systems, Inc.081507