Gas monitor CANline BUS Datasheet

CANline BUS Gas Monitor Panel • The CANline control unit displays the detector gas concentration with name and location. • The CANline may be connected to a total of 32 sensors along with remote displays and 6 off relay cards. • Maximum of 32 relays may be connected to the CANline • The SELECT button can be used for selecting several modes of display. • PEAK reading or sequential scanning. • The integrated timer may be used for periodic switching of relays, e.g., to activate local fans in the monitoring zones at set times in the day. • Different groups / zones may be programmed to specific relays. • Option for wall or cabinet mounting • History; the integrated alarm events and error messages are recorded. • RS232 output • Robust metallic enclosure • The system has been developed by KIMESSA and is manufactured in Switzerland. Technical changes and availability reserved CANlineA V300512mb Features • 32 BUS sensor inputs (sensors type KSxC, KSIM) • Digital display indicates the gas concentration in ppm or % LEL • 4 gas alarm thresholds indicated on the digital display • 8 potential free relays contacts 2A 230VAC • max. 6 CANline -Relay Cards with 4 free relays outputs per card • Relay on and off time delay programming option (each relay is programmable) • Timer for periodic ventilation in an indoor car park • Relays: Manual or auto reset, manual reset override, energized or de-energised • Individual alphanumeric identification for each sensor Specifications Operating voltage 20...26 VDC Emergency power supply 24 VDC Power consumption 60 mA Dimensions H 218 x W 230 x D 63 x mm Weight 2’700 gr. Inside view Cable pull relief Connections - Bus connection - Relay contact