Gauge Pressure Transmitter FCX-AII V5 series

lectricujiFuji Electric France S.A.Leading the way...Long Term Stability, High Accuracy Pressure TransmitterSeries Ver.5Ease of useConfiguration can be performed using 3 push buttons on the LCD indicator, hand held communicator or PC software. Application FlexibilityBy selecting from a large range of materials, we are able to customise the transmitter and remote seal. We temperature compensate the whole assembly to maintain the highest level of performance.Selecting from 316SS, Hastelloy, Monel, Tantalum, Gold and Ceramic we can custom build a transmitter to solve your application problems.economicadded valuePhasewatcher flowmeter from Framo EngineeringHigh Accuracy over the long termUp to 0.04% accuracyUnrivalled Long term stability : +/- 0.1%/ 10 yearsDP Transmitters for Static Pressure up to 1035Bar (15 000psi)evolutionof productsAsset ManagementenvironmentalsustainabilityEnhanced configuration & maintenance tools are provided via PC software. This can be used to track calibration changes to each transmitter and store as data to your hard drive, or other storage device.C1 C2Pressure on low pressure sidePipeMetal basedSilicone DiaphragmCapacitance measurement electrodeThrough Hole MetalPressure on high pressure sideCeramicMeasuring CellMicro-capacitance ASIC based electronicP2 P1Microbore tube(LP)Low pressureMicrobore tube(HP)High pressureMicro capacitance silicon sensorInsulating Diaphragm Overrange protection diaphragmFeaturesThe micro machined silicon sensor is based on two capacitance values that change when differential pressure is applied. This technology minimises the influence of temperature fluctuations on the differential pressure measurement.By “floating” the cell in silicon oil from the high pressure side of the transmitter, the cell is provided with its own laboratory conditions. This isolates it from the influence of pressure and temperature fluctuations. By using microbore technology the volume of silicone oil is minimised, which further reduces the influence of temperature on the pressure measurement. PrincipleThe combination of micro machined silicon and “floating” cell technology gives us the ability to provide you with DP transmitters that can cope with static pressures of up to 1035 Barg, 0.04% accuracy and 10-year stability.Keeping things “micro” reduces environmental influences. Specifications ? Fuji ElectricYour distributor:Coulton Instrumentation LtdTel: 01202 480 303sales@coulton.comwww.coulton.comCommon SpecificationsDiaphragm materials SS316L, hastelloy-C, monel, tantalum, zirconium, titanium, double coated with gold and ceramicElevation/suppression -100 to +100%URLSpan measuring range 100 to 1/100 URLLiquid contacting temperature-40 to 120ºCAmbient temperature -40 to 85ºCOutput signal / Allowable load resistanceDC 4 to 20mA / 600 OhmSupply voltage DC 10.5 to 45VLong-term stability ±0.1% URL/10 yearsExplosion-proof specificationFlameproof, intrinsic safety typeMounting method 50A pipe mounting, direct mountingWeight 2.9Kg (standard unit)Differential Pressure (flow) transmitterType FKC (or FKD with remote seal)Measuring span 1/6/32/130/500/3000/20000 kPaMaximum static pressure 2/10/16/30/42 MPaMeasuring accuracy Up to ±0.04% Standard: ±0.065%Pressure (gauge) transmitterType FKG, FKP or FKB with remote sealMeasuring span 130/500/3000/10000/50000 kPaMaximum test pressure 1/1.5/9/15/75 MPaMeasuring accuracy Up to ±0.04% Standard: ±0.065%Absolute pressure transmitterType FKA, FKH or FKM with remote sealMeasuring span 16/130/500/3000 kPaMaximum test pressure 0.5/1.5/9 MPaMeasuring accuracy Up to ±0.1% Standard: ±0.2%Level transmitterType FKEInformation on this catalog is subject to change without notice - Printed in the UK - Brochure ref CB-T-V5-01bFKGFKPFKBFKAFKHFKMFKCFKDFKE