Gems - A Series - Solenoid Valve Catalogue

J-16Visit www.GemsSensors.com for most current information.DimensionsThreaded Port Body Molded CoilManifold Mount BodyAlternate 1/2? Conduit HousingAvailable on all body confi gurationsStop PortStandard on 2-way N.O.; Option "AD" on 3-Way.A Series? MOPD: 69 Bar (1000 PSI)? KV Range: 0.016 to 0.256 (CV Range: 0.019 to 0.3)? 6 WattsThe A Series gives you a highly adaptable design for practically all applications requiring fl ow between KV 0.016 to 0.259 (CV 0.019 and 0.300). This robust 2- or 3-way miniature solenoid utilizes a stainless steel body to resist corrosion for most acids, alkaline solutions, and harsh environments. Also available in plastic—from polypropylene to Delrin®—when specifi c inert or demanding requirements are needed. Available in numerous port confi gurations, orifi ce sizes, and material combinations, the A Series is a highly fl exible valve that fulfi lls the requirements for most applications.Typical ApplicationsStainless Steel Bodies: • Medical Equipment • Laboratory Equipment • Food Processing EquipmentBrass Bodies: • Industrial Applications • Automotive • Water Transfer SystemsGENERAL PURPOSEContact Gems for UL and CSA approved optionsMaterialsBody 303 S.S.Guide Assembly 430FR S.S., 304 S.S., 430FR S.S.Adapter 430F S.S.Plunger 430FR S.S.Return Spring 302 S.S.Shading Ring CopperPlunger Seals NitrileO-Rings NitrileØ26.2(1.03)50.0(1.97)(2-WAY N.C.)57.9(2.28)(3-WAY)6.8(0.27)32.5°#8-32 UNC-2B x0.25 MIN. FULL TH’DON A Ø0.735 B.C.(2) PLC’SBODY PORTS1/8-27 NPT(2) PLC’S#20 AWG BLACKLEADS x 18?STOP PORTSAE 45° MALE FLAREWITH 5/16-24 TH’DFOR 1/8? O.D. TUBE(OVERSEAT)(UNDERSEAT)Ø25.1(0.99)7.1(0.28)1/4-28 UNF-2AMOUNTING STUDØ25.1(0.99)(OVERSEAT)Ø0.125 SPANNER HOLES, (4) HOLESEQUALLY SPACED4.3(0.17)4.9(1.69)(UNDERSEAT)O-RINGS52.4(2.065)(2-WAY N.C.)1/4? SPADE TERMINAL(2) PLC'S27.9(1.100)34.4(1.355)7.9(0.310)15.1(0.595)26.7(1.050)44.1(1.735)0.8(0.032)1/8-27 FNPT69.1(2.72)TOTALVALVEHEIGHT28.2 (1.11) CONDUIT OPTION(1/2-14 NPSM)J-17 Visit www.GemsSensors.com for most current information.Part Prefi x Table 1Orifi ce MOPD KV CV 1 Primary Prefi xBody Stop bar psig Body Stop Body Stop Grommet HousingConduit Housingmm inches mm inches2-WAY N.C.0.79 1/32 — — 69 1000 0.017 — 0.020 — A2011 A20211.19 3/64 — — 34 500 0.030 — 0.035 — A2012 A20221.59 1/16 — — 21 300 0.055 — 0.065 — A2013 A20231.98 5/64 — — 14 200 0.077 — 0.090 — A2014 A20242.38 3/32 — — 12 175 0.132 — 0.155 — A2015 A20253.18 1/8 — — 6.9 100 0.205 — 0.240 — A2016 A20263.97 5/32 — — 3.4 50 0.256 — 0.300 — A2017 A20272-WAY N.O. (option AD standard)— — 0.79 1/32 14 200 — 0.016 — 0.019 A2211 A2221— — 1.19 3/64 10 150 — 0.034 — 0.040 A2212 A2222— — 1.59 1/16 6.9 100 — 0.064 — 0.075 A2213 A22233-WAY N.C.Free Vent0.79 1/32 0.79 1/32 14 200 0.016 0.016 0.019 0.019 A3011 A30211.19 3/64 1.19 3/64 10 150 0.034 0.034 0.040 0.040 A3012 A30221.59 1/16 1.19 3/64 6.9 100 0.060 0.034 0.070 0.040 A3013 A30231.59 1/16 1.59 1/16 5.2 75 0.060 0.060 0.070 0.070 A3014 A30242.38 3/32 1.19 3/64 3.4 50 0.145 0.034 0.170 0.040 A3015 A30253-WAYN.C.Line Connection0.79 1/32 0.79 1/32 14 200 0.016 0.016 0.019 0.019 A3111 A31211.19 3/64 1.19 3/64 10 150 0.034 0.034 0.040 0.040 A3112 A31221.59 1/16 1.19 3/64 6.9 100 0.060 0.034 0.070 0.040 A3113 A31231.59 1/16 1.59 1/16 5.2 75 0.060 0.060 0.070 0.070 A3114 A31242.38 3/32 1.19 3/64 3.4 50 0.145 0.034 0.170 0.040 A3115 A31253-WAYN.O.0.79 1/32 0.79 1/32 10 150 0.016 0.016 0.019 0.019 A3211 A32211.19 3/64 1.19 3/64 6.9 100 0.034 0.034 0.040 0.040 A3212 A32221.59 1/16 1.19 3/64 6.2 90 0.060 0.034 0.070 0.040 A3213 A32231.59 1/16 1.59 1/16 5.2 75 0.060 0.060 0.070 0.070 A3214 A32242.38 3/32 1.19 3/64 3.4 50 0.145 0.034 0.170 0.040 A3215 A32253-WAY Multi Purpose0.79 1/32 0.79 1/32 8.6 125 0.016 0.016 0.019 0.019 A3311 A33211.19 3/64 1.19 3/64 6.9 100 0.034 0.034 0.040 0.040 A3312 A33221.59 1/16 1.19 3/64 6.2 90 0.060 0.034 0.070 0.040 A3313 A33231.59 1/16 1.59 1/16 5.2 75 0.060 0.060 0.070 0.070 A3314 A33242.38 3/32 1.19 3/64 1.7 25 0.145 0.034 0.170 0.040 A3315 A33253-WAY Directional Control0.79 1/32 0.79 1/32 16 225 0.016 0.016 0.019 0.019 A3411 A34211.19 3/64 1.19 3/64 10 150 0.034 0.034 0.040 0.040 A3412 A34221.59 1/16 1.19 3/64 6.9 100 0.060 0.034 0.070 0.040 A3413 A34231.59 1/16 1.59 1/16 5.2 75 0.060 0.060 0.070 0.070 A3414 A34242.38 3/32 1.19 3/64 3.4 50 0.132 0.034 0.155 0.040 A3415 A3425How To OrderUse the Bold characters from the choices listed on the following page to construct a product code.Note: After the Primary Prefi x, any "-Code" may be blank when standard (blank) selections are specifi ed.Example:A2213-3-BB-N-NO-LB-110/60VAC-WM-TP2-Way N.O. (with 1/8?-27 NPT stop port adaptor) solenoid valve, with brass body, neoprene plunger seal, neoprene O-ring, 1/4?-18 FNPT body ports, operating at 110/60 VAC/Hz, and includes the mounting bracket and PTFE coated plunger options.A2213 - 3 - BB - N - NO - LB - 110/60VAC - WM-TP13245678PrimaryPrefi x CoilConstructionBody MaterialPlungerSealMaterial O-RingMaterialBody PortConfi gurationVoltageAdditionalOptionsJ-18Visit www.GemsSensors.com for most current information.2 Coil Construction (blank) = Class 130°C (B), tape-wrapped, lead-wires – 45.7cm (18?) long* W___ = Lead-wires, non-standard length (specify in centimeters) 10 = Externally rectifi ed (AC voltage and lead-wires only) 1 = Class 130°C (B), encapsulated, lead-wires 4 = Class 130°C (B), encapsulated, 4.76mm (3/16?) spade terminals – 6.35mm (1/4?) spade optional HC2 = Class 130°C (B), encapsulated, 9.4mm DIN (EN175301-803 Style C Industrial 2+1 poles) 2M = Class 155°C (F), over-molded, lead-wires 5M = Class 155°C (F), over-molded, 6.35mm (1/4?) spade terminals 11 = Class 180°C (H), tape-wrapped, lead-wires 3 = Class 180°C (H), encapsulated, lead-wires 3M = Class 180°C (H), over-molded, lead-wires 6M = Class 180°C (H), over-molded, 6.35mm (1/4?) spade terminals3 Body Material (blank) = 303 Stainless Steel* BB = Brass SB = 304 Stainless Steel SB5 = 316 Stainless Steel SBF = 430F Stainless Steel4 Plunger Seal Material (blank) = Nitrile* E = EPR GV = Gasoline Viton® (2-way valves only) N = Neoprene NS = Nitrile (NSF/FDA, 2-way valves only) PF = Perfl uoroelastomer R = Rulon® (2-way valves only) T = PTFE V = Viton®5 O-Ring Material (blank) = Nitrile* EO = EPR NO = Neoprene NSO = Nitrile (NSF/FDA, 2-way valves only) PFO = Perfl uoroelastomer TO = PTFE VO = Viton®* Standard selection; will be used unless otherwise specifi ed. Standard selections are not referenced in fi nal part number.6 Body Port Confi guration (blank) = 1/8-27 NPT female thread* LB = 1/4-18 NPT female thread BD = #10-32 female straight thread – max. orifi ce = 3.18mm (1/8?) LT = 1/8-28 BSPT female thread with M4 x 0.7 mounting threads (2-way valves only) LU = 1/4-19 BSPT female thread with #8-32 mounting threads (2-way valves only) MM = Manifold mount (1/4-28 UNF-2A mounting stud)1 MM3 = Manifold mount (5/16-24 UNF-2A mounting stud)1 OB = Omit body (operator style) MB = Bottom metering – max. orifi ce = 2.38mm (3/32?) BI = Bottom over-seat port, female thread – max. orifi ce = 3.18mm (1/8?) BIM = Bottom over-seat port, 1/8-27 NPT male thread – max orifi ce = 1.98mm (5/64?) brass body only BO = Bottom under-seat port, female thread BOM = Bottom under-seat port, 1/8-27 NPT male thread – max orifi ce = 3.18mm (1/8?) brass body only RL = 90° porting - left hand RR = 90° porting - right hand BS = Stop port, #10-32 female straight thread27 Voltage3 ___VDC = DC (specify DC voltage) ___VAC = AC (specify AC voltage; includes copper shading ring) 8 Additional Options Y = Yoke WM = Mounting bracket TP = PTFE coated plunger AD = 1/8 - 27 NPT stop port adapter (3-way valves only) S = Silver shading ring OC = Cleaned for oxygen use VAC = Vacuum application – 0 to 1000mBar (0 to 29.5? Hg) G1 = One-piece 303 Stainless Steel guide assembly G5 = One piece 316 Stainless Steel guide assemblyNotes1. Tefl on® o-ring not suitable for manifold mount.2. Plastic body available, contact Gems.3. Can be AC rectifi ed without shading ring. Use coil construction Code 10.GENERAL PURPOSE