General Catalogue GFL - Brochure

Deep FreezersShakersIncubatorsWater BathsWater StillsLaboratory EquipmentLaborgerätewww.GFL.deDeep FreezersWater BathsShaking Water BathsIncubatorsShakersWater StillsSummary of Laboratory Products2? Chest Freezers Page 3? Upright Freezers Page 3? Water Baths Page 21? Tissue Float Bath Page 31? Shaking Water Baths Page 33? THERMOLAB® Page 38? Incubators Page 41? Shaking Incubators Page 44? Hybridisation Incubator Page 48? Mini Incubator Page 50? Tube Roller Incubator Page 50? Shakers Page 53? Test Tube Rotator Page 64? Rotating Shaker Page 65? Water Stills Page 71Would you like to find out more detailsabout our range of products?Phone: ++ 49 - 5139 99 58 - 0Fax: ++ 49 - 5139 99 58 21E-Mail: info@GFL.deInternet: www.GFL.deChest and Upright Freezers up to - 85 oC for long-term storage andquality assuranceDeep Freezers3Qualitybuilt on TraditionIn the future, the success of a product spectrum of laboratorydevices that meet the toughestdemands on material, functioning anddesign will continue to be ensuredby experience of every-day use indetail, ongoing technical advancesand an excellent quality approach.The phrase „Quality built onTradition“ encompasses more than just the sum of impressive product innovations. It is also an ex pression of our corporate policy, which includes ahigh degree of ready-and-waitingservice as our primary customer-friendly service goal.This applies to all of the GFL laboratory products that are produced exclusively at our plant in Germany - Shakers, ShakingWater Baths, Water Baths, Incubatorsor Water Stills, Deep Freezers alike.Users in research labs, standard and special labs for medicine, science and industry throughout the world have been profiting from the precision and dependability of our products for 45 years, all of which comply with valid European standards and bear the CE mark.Secure futureA vested quality demand in accordance with international standards is documented for all GFL laboratory products with thecertification to DIN EN ISO 9001:2008,promoting more trust in the permanent high quality level of our products.In addition to the continuous optimisation of ongoing productionprocesses, the ISO obligation also calls for the commitment toquality awareness of our employeesand the continuous developmentand rapid implementation of preventive measures to ensure quality assurance at a high level.certified quality system4GFL Deep Freezers areequipped with bothmicroprocessor techniqueand an interface module forconvenient remote control, monitoringand temperature recording via PC.Trouble-free data transfer is realised via the built-in serial RS 232 port.Also available are two further data transfer formats, RS 422 and RS 485,making the units compatible,for example, to the PC software labworldsoft®.This software enables the user, amongother things, to control via PC up to 64 lab devices independently from oneanother and to evaluate all data.Output signals of specified and actualvalues are available.Data acquisition is effected online andcan be presented either graphically ornumerically. Complete measuring GFL Unit Control by PCconfigurations can be stored with all oftheir current parameters for optimumreproducibility. System requirements:Hardware• Pentium 90 with at least 16 MBRAM, 8 MB free HDD space, mouse• VGA display; monochrome displaywith at least 16 grey levels, or colourSoftware• Windows 95/98/2000/NT/ME/XP...PageGFL Deep Freezers 6-7Upright and Chest Freezers 8-11Special makes 12-13Accessories 14-15Storage system 16-17Technical data 18-20Contents56485 Upright Freezer, 500 litres, with storage system and three additional shelvesDeep Freezers from GFL - enjoying success 6The GFL Deep Freezer programmeincludes Chest and Upright Freezerswith capacities ranging from 30 to 500 litres volume. There are 12 ChestFreezers with six different volumes, respectively, six Upright Freezers havingthree different storage volumes.Both of these product groups are designed for temperatures of 0 °C to -40 °C, or -50 °C to -85 °C inan ambient temperature of up to +28 °C.? Organic substances which must be stored for extended periods normallyrepresent invaluable assets. Preservation of these substances thereforerequires an appropriate storage temperature. Only tested Deep Freezersthat operate without any faults or disturbances can guarantee thatmaterial such as cell lines or tissue from humans, animals or plants,blood and /or blood fractions, vaccines or reference strains from micro-organisms such as bacteria, yeasts, viruses and fungi will be protected and stored safely and reliably.The extensive reference list of more than 1400 addresses of well-knownusers of GFL Deep Freezers in Germany alone attests to this customerrequirements for quality and reliability, dependability, long service lifeand functionality as needed for the application at hand. These are thecharacteristics that research institutes, universities, hospitals, blood banksand pharmaceutical and chemical companies have come to trust in GFL Freezers. And of course there are a number of companies that usemore than just one GFL Deep Freezer.Our Deep Freezers are also frequently used for various material tests, such as for quality assurance testing of plastics and adhesives, paints and varnishes, ball bearings or road paving materials.GFL Chest and Upright Freezers are in service in more than 80 countriesthroughout the world. in more than 80 countriesGFL Deep Freezers are manufacturedusing only high-quality, stringentlytested materials that are particularly suitable for ultra-low temperatures. The units are extremely quiet, havebeen approved with the CE mark, aremaintenance-free and have the German TÜV seal for „certified safety“(GS) based on the Federal GermanEquipment Safety Code.All designs are subject to change. Special makes available on request. User-friendly microprocessor techniqueThe keypad for the control panel is onlythe visible tip of the iceberg of thehigh-performance microprocessor technique which all GFL units are equipped with. All values and data relevant for safe and reliable storagecan be entered or retrieved using theclearly laid out and defined symbols.The actual and set temperatures, or thelimits for over and under temperatures,for example, can be checked using theLED display. The same applies to thebattery capacity and battery loadinglevel. Active operation of an additionallyinstalled safety cooling system is indicated by two extra LED’s.Any faults that may occur are indicatedimmediately by optical and acousticalarms. Possible causes for the fault aresignalled by code numbers in the display.The user can also set further alarm options as required. Data settings can beprotected against unauthorised accessby a key-operated security switch.6380 Chest Freezer, 70 litres, with storage system consisting of racks and boxesCertified measuring data accordingto FDAFor customers whose freezer applicati-ons call for particularly stringent obser-vance of quality standards, we supplyon request detailed records on spatialand temporal temperature constancybasing on the approval guidelines ofthe US American Health Authority FDA.The instrument test runs are conductedusing a calibrated test section in test baysat the factory. Certified test data arearchived for a period of ten years at GFL(Order No. 6965, page 13).78Upright Freezers / Chest Freezers6483Upright Freezer, 300 litres? Microprocessor-controlled temperature regulationThe microprocessor-controlled temperature regulator, with digitaldisplay of actual and set temperaturevalues and digital setting for specifiedvalues, operates maintenance-freeand is shock resistant.The regulator is battery-buffered bya constantly charged NC battery thatmaintains the display of the actualtemperature and the alarm functionsfor 60 hours in case of a power failure.During operation on the line the battery level and the set temperaturecan be checked by touch control.? Energy-saving cooling unitThe maintenance-free cooling unit,equipped with fully hermetically sealed high-performance com -pressors and an air-cooled condenser,ensures short cooling times. The refrigerant is non-flammable.The all-around insulation comprisesan up to 150 mm thick, seamless anddiffusion-protected foamed-in poly-urethane layer. This insulation is anessential precondition for energy-saving operation. The quietly running compressors only give off around 400 W of heat to the environment at maximumcooling temperature.96481Deep Freezer, 96 litres, with cover plate, asstand-alone unit6481 Deep Freezer, 96 litres, sub-counterinstallation possible? Ex-proof inside cabinetsThe inside cabinets are manufacturedcompletely of stainless steel (materialNo. 1.4301), are corrosion resistantand easy to clean.They are free from ignition sources -an extremely important aspect whenstoring media with low flash points -and are ex-proof in accordance withBG-I 850-0, version 02/2009. Thecooling air outlet is located at thefront of the unit, meaning thatexplosive gases cannot be drawn inwhen the lid or door is opened.The magnetic sealing system reliably prevents freezing of the lid or door seals.All chest lids are balanced and easyto operate. Chest Freezers having avolume of 220 to 500 litres are alsoequipped with additional insulatingcover plates on the cabinet.Upright Freezers with storage volumes of 300 and 500 litres areequipped with three inside compartments (H 353 mm), eachprovided with an insulating door toprevent any loss of cold air. Optionalshelves can also be installed in thecompartments (see page 15). On request, the cabinet can also be equipped with a set of drawersinstead of the inside compartments(see page 13).? Alternative solution: Sub-counter installationIn daily laboratory practice, especiallythose Deep Freezers convince thatguarantee more than just high-qualityprotection and reliable longevity ofthe stored material samples.Alternative solutions are requiredthat meet customers' demands ofpractical functionality and flexibilityin their range of applications.The sub-counter Deep Freezers 6441and 6481 are attractive examples forthis philosophy. After removing thecover plate, the units can easily beintegrated into a laboratory bench,thus enabling the storage of frozenmaterials ready at hand at the workstation.Deep Freezers 6441 and 6481 offera large storage volume while at thesame time requiring little space (96 l cabinet volume / 3 drawers)and operate in temperature rangesfrom 0 to -40 °C and from -50 °C to -85 °C.Further details: Accessories / externaltemperature recorder (page 13) andtechnical data (pages 16 - 18).6345Chest Freezer, 500 litres? Powder-coated housingThe housings are made of powder-coated, electrolytically galvanisedsheet steel.As standard, all Deep Freezers comewith double wheel swivel castors,two of which can be locked, fortransport to the place of use and for mobile applications (castors formodels 6441 and 6481).? Controlled accessThe lids and doors of the freezerunits can be locked, making unauthorised removal of materialimpossible. The easy-to-use controlpanel provides controlled accessthrough the use of a key-operatedsecurity switch, ruling out any inadvertent temperature maladjustment.Upright Freezers / Chest Freezers10116384 Chest Freezer, 300 litres6382 Chest Freezer, 100 litres? Multiple alarm messagesAs standard, the Deep Freezers come with a potential-free changeover contact for connectionto an internal alarm system, or tothe central I&C system. They are alsoprovided with a connection for apiezoelectric buzzer for simple remo-te notification of alarms (max. cablelength: 100 m with a cable diameterof 0.14 mm2).In the event of a fault (e.g. excesstemperature, under temperature, lossof power, sensor break/short-circuit, etc.), an optical and acousticalarm is issued. The cause for thefault is shown in the display as adefined code number.The limit values for alarms (1 - 20 K)for excess and under temperaturescan be set individually by the user.Other optional alarm messages canalso be set by the user:? Suppression of alarm messageafter a power failure (0 to 999minutes); this feature is useful, forexample, if emergency backuppower systems are tested regularly.? Suppression of alarm message onviolation of a temperature limit (0 to 999 minutes).The set value remains stored untilthe next change is made. This can be useful, for example, whenlarge quantities of refrigeratedgoods are removed/put into storage frequently.? Suppression of alarm message onviolation of temperature limits (0 to 999 minutes). The set valueis cancelled when the set timeexpires. This can be useful, forexample, when large quantities of refrigerated goods areremoved/put into storage onlyoccasionally.? Guaranteed supply of spare partsSpare parts can be delivered from stock for all Deep Freezer models.GFL guarantees their availability forten years. ? Intensive quality controlCustomers’ trust in our products isensured by our intense quality assurance procedure. This is why GFL Deep Freezers are tested withstate-of-the-art testing devices before they leave our factory.12Special makes? The service supplied to our customers does not end at the convincing high quality standard of our Deep Freezers. In order to enhance their variability and, thus, the benefits for the user, we also supply customised equipment on request, tailored to the individual requirements of tasks that demand special solutions for storage.6485 Upright Freezer,500 litres, custom designwith two standard compartments and alarge drawer unit madeof stainless steel withperforated raised sideelements and a 10 mmthick insulating plasticcover with a grip hole.Storage system for testplates and boxes.13Whether it be a microtiter plate, a cryo box or dinosaur bones - handlingof particularly small or very large bulky storage goods is facilitated forthe individual case at hand by the appropriate drawer, divider or compartment solution. Sample solutions for storage task:? Drawers with modified heights forUpright Freezers? Combination of inside compartments/drawers for Upright Freezers? Locking systems for inside compart-ments of Upright Freezers? Inside compartment covers made ofacrylic glass for Upright Freezers? Drawer dividers for Upright Freezers? Reinforced shelves for UprightFreezers? Cabinet dividers for Chest Freezers? Storing tubs in different sizes? Specially dimensioned storagesystems? Installation of additional leadthroughs? Installation of additional temperaturesensors? Separated storage and motor units to allow deep freeze storage in asensitive working area? Equipping of our Deep Freezers witha self-dialling alarm phone systemenhances storage safety6485 Upright Freezers,500 litres, custom design with five insidecompartments and inside doors made of 10 mm thick acrylicglass, with grip hole.Storage system for test plates and boxes.14Distribution line (CO2 bottles not included in scope of supply)The distribution line for safety coolingsystem 6947 can be ordered completewith all requisite connectors, tubes andmaterials for wall mounting.Safety cooling system (Refrigerant vessel not included in scope of supply)A power outage or a fault with the unitcan often result in thawing of valuablematerial samples, usually with the associated financial losses and lost work time.Safety cooling systems protect againstnon-regulated rises in temperature bykeeping the temperature in the cabinetconstant at a freely selectable value (0 to -70° C) by controlled injection of LN2 or CO2 when the main coolingsystem fails.There are four different cooling systemsfor two different refrigerants availablefor protecting highly sensitive materialsagainst uncontrolled warming or thawing.These systems can be installed in ChestFreezers with a volume of at least 70 land in Upright Freezers starting at avolume of 300 l storage space.The most commonly used refrigerantfor safety cooling systems, and the onewhich is available nearly everywherethroughout the world, is CO2.LN2 is used in cases the stored materialmust not come into contact with CO2. The four types of cooling systems differin the power supply used for eachsystem:? Versions 6946a and 6947a are designed for connection to a 230 Voltemergency power system (a.c.).? Order No. 6948Distribution line for two CO2 bottles? Order No. 6949Distribution line for three CO2 bottles? Order No. 6946a LN2 safety cooling system for 230 V a.c. (emergency power)? Order No. 6946b LN2 safety cooling system for battery-powered operation? Order No. 6947a CO2 safety cooling system for 230 V a.c. (emergency power)? Order No. 6947b CO2 safety cooling system for battery-powered operation? The range of application for our Deep Freezers is expanded using accessoriesappropriate for the task at hand. GFL accessories for Chest and Upright Freezerstherefore not only enhance the reliability and performance of our range of products, but also improve their economic efficiency.? Versions 6946b and 6947b are, in case of a power failure, suppliedwith power by a battery providedwith the system for around 60 hours. The battery is recharged automatically when normal powersupply is restored.Distribution lines are required if two or three CO2 bottles are connectedsimultaneously to the freezer unit (see Order No. 6948 and 6949). The CO2 bottles must be provided with a rising pipe and must not beconnected to a pressure limiter.At a setting of -60 °C for the safetycooling, consumption of CO2 or LN2is about 1.2 kg per hour.Accessories15Water coolingA heat exchanger is installed in place ofthe air-cooled liquefier. The advantagehere is that the heat exchanger considerably reduces the heat given off by the unit to the environment, at the same time, expanding the permissible ambient temperature rangein which the unit can be operated.Qualification data recordThe GFL qualification data record provides detailed documentation of thespatial and temporal temperature constancy in our Deep Freezers. Allrequested test and measurement dataare established at our factory using acalibrated test section and archived atGFL for one decade.GFL customers can use this device-specific qualification data record todemonstrate the quality of their products when they must, for example,comply with the special approval guidelines defined by the US AmericanHealth Authority FDA.? Order No. 6965Chart recorderThe chart recorder ensures continuousrecording of the inside cabinet tempera-ture on pressure sensitive paper. Thecurrent measured value is recorded withconstant, clear legibility without the useof expensive ribbons or ink.The chart recorder is designed for continuous operation and is equippedwith three paper feed options:a) 25 mm in 24 hoursb) 25 mm in 2 hoursc) 25 mm in 1 hourDepending on the set feed rate, a roll ofpaper * for the recorder (9.2 m in totallength) will last from 15 to 368 days.Except for easy replacement of thepaper rolls, the chart recorder is com-pletely maintenance-free. The recordercan be installed in Chest Freezers with astorage volume of 70 and 100 litres andin Upright Freezers with a storage volumeas of 300 litres (Order No. 6950). In combination with the other GFLFreezers the chart recorder is mountedin a separate housing (Order No. 6951).? Order No. 6950for installation? Order No. 6951 in a separate housing? Order No. 6960Drawer sets for Upright FreezersThe cabinet of Upright Freezers canalso be equipped with a set of four drawers in place of the three insulatedcompartments. These drawers aremade of stainless steel with frontpanels made of 10 mm thick polystyreneinsulating plates. Ball bearings and sliderails ensure easy and level motion.? Order No. 6952for Upright Freezers 6443 and6483 (300 l volume)? Order No. 6953 for Upright Freezers 6445 and6485 (500 l volume)Water supply is regulated by the Freezer.The heat exchanger can be connectedto a recirculation system or to the inter-nal water supply system. (Connectingpoints on unit: outside thread connectorfor pressure hose 1/2 inch* with locknut.) A water cooling system can beinstalled in GFL Deep Freezers with avolume of at least 220 litres.* not in scope of supply* Art. no. 13.608, one roll supplied as standard16Storage system? The GFL storage system is flexibly structured. Optimisedutilization of the storage spaceis achieved using racks for boxes, microtiter andDeepWell plates, thus reducing the costs per samples that are stored.The stainless steel racks reduceoverall weight and are easy tohandle. Use of these drawersguarantees well-arranged and safe storage of the entire sample material.The box capacity for storingsamples can be varied, permitting the system to beadapted to a variety of applications. The boxes aremade of water-resistant coatedcardboard. There are three different dividers available forthe boxes. ?Racks included in the GFL storage system programme for boxes, microtiter and DeepWell platesBoxes (130 x 130 mm) included in the GFL storage system programme:6970 (H 50 mm) and 6980 (H 75 mm)Inner dividers for boxes 6970 and 6980? Order No. 6971 / Division 10 x 10for 100 test tubes with a diameter of 11 mm / section dimensions 12x12 mm? Order No. 6972 / Division 8 x 8for 64 test tubes with a diameter of 14 mm / section dimensions 15x15 mm? Order No. 6973 / Division 7 x 7for 49 test tubes with a diameter of 16 mm / section dimensions 17x17 mm1750 mm box height 6970 8 6901 6 4875 mm box height 6980 8 6902 4 32Microtiter plates – 12 6905 18 216DeepWell plates – 12 6905 6 7250 mm box height 6970 15 6901 6 9075 mm box height 6980 15 6902 4 60Microtiter plates – 20 6905 18 360DeepWell plates – 20 6905 6 12050 mm box height 6970 18 6903 10 18075 mm box height 6980 18 6904 7 126Microtiter plates – 24 6906 30 720DeepWell plates – 24 6906 10 24050 mm box height 6970 21 6903 10 21075 mm box height 6980 21 6904 7 147Microtiter plates – 30 6906 30 900DeepWell plates – 30 6906 10 30050 mm box height 6970 40 6903 10 40075 mm box height 6980 40 6904 7 280Microtiter plates – 56 6906 30 1680DeepWell plates – 56 6906 10 56050 mm box height 6970 24 6907 9 21675 mm box height 6980 24 6908 6 144Microtiter plates – 24 6911 36 864DeepWell plates – 24 6911 12 28850 mm box height 6970 24 6909 15 36075 mm box height 6980 24 6910 10 240Microtiter plates – 24 6912 72 1728DeepWell plates – 24 6912 24 57670 l100 l220 l300 l500 l300 l500 l6340 / 63806342 / 63826343 / 63836344 / 63846345 / 63856443 / 6483 300 l 69546445 / 6485 500 l 69556443 / 64836445 / 6485Model Volume Contents Order No. Number of Order No. Number of Number offor racks for boxes/plates boxes/plates1 box per unit 1 rack per rack per unitModels Volume Order No.for one shelfUpright FreezersAdditional shelves for Upright Freezers ? Upright Freezers having a storage volumeof 300 and 500 litres come with threecompartments as standard equipment.As an option, each compartment can besectioned with one additional shelf for optimal utilisation of the internal volumeof the unit.Chest Freezers186340 70 ± 0 to –40 600x 350x 340 836x 685x1055 836x 585x1055 0.6 100 1.1 ?6341 30 ± 0 to –40 500x 305x 200 700x 600x 905 700x 500x 905 0.6 70 0.6 ?6342 100 ± 0 to –40 710x 440x 340 960x 790x1080 960x 690x1080 0.6 180 1.9 ?6343 220 ± 0 to –40 840x 460x 580 1450x 870x1040 1450x 770x1040 0.6 210 3.0 ?6344 300 ± 0 to –40 1000x 500x 600 1610x 910x1060 1610x 810x1060 0.6 240 3.0 ?6345 500 ± 0 to –40 1440x 580x 600 2060x1000x1060 2060x 900x1060 0.6 310 3.4 ?6380 70 –50 to –85 600x 350x 340 836x 685x1055 836x 585x1055 1.2 120 1.1 ?6381 30 –50 to –85 500x 305x 200 700x 600x 905 700x 500x 905 1.2 90 0.6 ?6382 100 –50 to –85 710x 440x 340 960x 790x1080 960x 690x1080 1.2 200 1.9 ?6383 220 –50 to –85 840x 460x 580 1450x 870x1040 1450x 770x1040 1.2 230 3.0 ?6384 300 –50 to –85 1000x 500x 600 1610x 910x1060 1610x 810x1060 1.2 260 3.0 ?6385 500 –50 to –85 1440x 580x 600 2060x1000x1060 2060x 900x1060 1.2 330 3.4 ?Order Volume Temperature Inner Outside Outside Power Net PackingNo. range °C dimensions dimensions (A) dimensions (B) kW weight volumeW x D x H mm W x D x H mm W x D x H mm approx. kg approx. m3Technical data? The GFL programme for Chest and Upright Freezers, with 18 model options and seven different storage volumes, is the result of more than 40 years of production experience and focuses on uncompromising and perfect safety and reliability.The following table lists the performance features oriented to the specific requirements for actual every-day use for each of the individual products.Delivered free German border, fas German seaport or fca German airport including packing in:? = cardboard box? = wooden crate,shipment through GFL’s forwarders. If other forwarders are to be used, we deliver ex works.6441 96 ± 0 to –40 430x 430x 510 900x 770x 890 900x 770x 865 0.45 140 1.1 ?6443 300 ± 0 to –40 600x 450x 1100 990x 865x1940 916x 785x1940 0.6 240 2.8 ?6445 500 ± 0 to –40 600x 760x 1100 990x1175x1940 916x1095x1940 0.6 310 3.5 ?6481 96 –50 to –85 430x 430x 510 900x 770x 890 900x 770 x 865 0.9 150 1.1 ?6483 300 –50 to –85 600x 450x 1100 990x 865x1940 916x 785x1940 1.2 270 2.8 ?6485 500 –50 to –85 600x 760x 1100 990x1175x1940 916x1095x1940 1.2 340 3.5 ?230 V one-phase voltage a.c. / 50 Hz (other voltages and frequencies on request) All designs are subject to change without noticeChest FreezersUpright Freezers19Chest FreezersModels 6343, 6344,6345, 6383, 6384,6385 with 220, 300and 500 litres storagevolumeModels 6340, 6341,6342, 6380, 6381,6382 with 30, 70 and 100 litres storage volumeModels 6443, 6445,6483, 6485 with 300and 500 litres storagevolumeSometimes, narrow doors demand smaller unit widths and/or depths when the Freezers are transported to the place of use. The product table (P. 14) shows both dimensions (A and B), illustrated on this page.Chest Freezers / Upright Freezers:The outside dimensions (A) given here are the actual dimensions.Chest Freezers: The outside dimensions (B) given here refer to the depth dimension after removing the lock and the lid hinges,the cable connections and the connector for the safety cooling system, the chart recorder, the power switch and thecontrol panel; with the height dimensions referring to when the lid is opened.Upright Freezers: The outside dimensions (B) given here refer to the width dimensions after removing the lock and to the depthdimensions without the cable connection and the connector for the safety cooling system, the chart recorder, power switch and control panel.W(A)HH(A) WW(A)HH(A)WW(A)HW(B)H(A) WD(A)D(B)DD(A)D(B)DDD(A)D(B)Upright FreezersChest Freezers20Sometimes, narrow doors demand smaller unit widths and/or depths when the Freezers are transported to the place of use. The product table (page 16) shows both dimensions (A and B), illustrated on this page.Upright Freezers 6441 and 6481 (suitable for sub-counter installation):The outside dimensions (A) given here are the actual dimensions.The outside dimensions (B) given here refer to the height with the cover plate removed.The Upright Freezers require a distance of at least 60 mm from other units or walls, thus providing sufficient cooling air supply.W(A)HH(A)WH(B)D(A)DModels 6441 and 6481 with 96 l storage volume,suitable for sub-counterinstallationUpright FreezersConvincing quality features stand for a practice-proven range of 13 special Water Baths that guarantee reliable temperature examinations,independent of their field of application.Water Baths21Qualitybuilt on TraditionIn the future, the success of a product spectrum of laboratorydevices that meet the toughestdemands on material, functioning anddesign will continue to be ensuredby experience of every-day use indetail, ongoing technical advancesand an excellent quality approach.The phrase „Quality built onTradition“ encompasses more than just the sum of impressive product innovations. It is also an ex pression of our corporate policy, which includes ahigh degree of ready-and-waitingservice as our primary customer-friendly service goal.This applies to all of the GFL laboratory products that are produced exclusively at our plant in Germany - Deep Freezers,Shakers, Shaking Water Baths,Water Stills, Incubators or Water Baths alike.Users in research labs, standard and special labs for medicine, science and industry throughout the world have been profiting from the precision and dependability of our products for 45 years, all of which comply with valid European standardsand bear the CE mark.Secure futureA vested quality demand in accordance with international standards is documented for all GFL laboratory products with thecertification to DIN EN ISO 9001:2008,promoting more trust in the permanent high quality level of our products.In addition to the continuous optimisation of ongoing productionprocesses, the ISO obligation also calls for the commitment toquality awareness of our employeesand the continuous developmentand rapid implementation of preventive measures to ensure quality assurance at a high level.certified quality system22Valued as universal laboratory aidsIn daily practice, GFL Water Bathshave been valued for decades as a robust and universal aid for reliable temperature examinations inlaboratories. They prove themselvesdaily in various fields of application –no matter whether they are used asIncubation or Inactivation WaterBaths,as Steam Baths, as Water Baths forfume hoods, Multiple Water Baths oras a Tissue Float Bath. All GFL WaterBaths are tested according to theGerman Equipment Safety Law andhave the CE mark.The accessories shown in this brochureare not included in the standard scopeof supply of the units. The right ofconstructional modifications remainsreserved. Special makes are available.Product-No. Page Accessories / Page1002 to 1008 Incubation/Inactivation Baths 24/25 26 /271012 and 1013 Incubation/Inactivation Baths with circulation system 24/25 271023 Steam Bath 28 281031 and 1032 Water Baths for fume hoods 29 –1041 and 1042 Multiple Water Baths 30 –1052 Tissue Float Bath 31 31Contents23? Successfully usedThe range of Incubation and Inactivation Bathscomprises seven models with five different sizes of 7 to 40 l capacity. Water Bath 1005 is especially suitable for warming medical hot packs. Water Baths 1012 and 1013 are equipped with a circulation system, thus guaranteeing an optimal temperature uniformity.24Specifications and features? Short heating-up times. ? Temperature display and setting digitally via LED display, in 0.1 °Cincrements. Fast and exact setting,exact reproducibility of the set value.? Electronic monitoring of the tempe-rature regulator. In case of failure,the cause of the fault is shown onthe display.? Soft-touch keys with clear symbols.Two-finger operation prevents unin-tentional alterations of the set value. ? Interior (bath interior and heatingelement, cover frame, lid and perforated floor) made of stainlesssteel. Standard equipment: lid andperforated floor. Water Bath 1005 is supplied without perforated floorif the rack for hot packs 1923(accessory) is ordered. Technical dataModel Interior dimensions Exterior dimensions Capacity Electrical Weight approx. PackingOrder Width Depth Working height? Width Depth Height approx. connection* net gross volumeNo. mm mm mm mm mm mm litres kg kg approx m 31002 245 200 145 330 395 255 7 230 V / 50...60 Hz / 1.0 kW 9 11 0.111003 400 245 145 485 440 255 14 230 V / 50...60 Hz / 1.5 kW 12 15 0.131004 600 245 145 685 440 255 21 230 V / 50...60 Hz / 1.5 kW 17 21 0.261005 410 296 315 495 490 445 40 230 V / 50...60 Hz / 1.5 kW 21 27 0.301008 400 245 205 485 440 325 20 230 V / 50...60 Hz / 1.5 kW 14 17 0.13? perforated floor to upper rim * Other voltages available on request1002 -10081005 Water Bath, 40 litres1003 Water Bath, 14 litres25The circulation system of Water Baths1012 and 1013 ensures optimum temperature uniformity throughout thewhole bath. An electric motor withrotary magnet is flanged to the bathfloor. Its torque is transmitted to a PTFE coated stirring magnet in thebath. The stirring magnet forces thewater into the centre of the bath andthen evenly back again.? Cover frame and lid have mirrorfinish. Lift-up, insulating lid withinner camber, no dripping back ofcondensate into the tubes.? Corrosion-resistant outer housing,made of electrolytically galvanisedsheet steel, powder-coated. Draincock at the back.ApplicationsAll Water Baths models 1002 to 1013are successfully used for incubationsand inactivations of cultures, such ase.g. for warming bacteriological media,carrying out chemical reactions or tha-wing samples.Technical dataModel Interior dimensions Exterior dimensions Capacity Electrical Weight approx. PackingOrder Width Depth Working height? Width Depth Height approx. connection* net gross volumeNo. mm mm mm mm mm mm litres kg kg approx m 31012 245 200 145 330 395 325 7 230 V / 50...60 Hz / 1.0 kW 10 12 0.111013 400 245 145 485 440 325 14 230 V / 50...60 Hz / 1.5 kW 14 17 0.13? perforated floor to upper rim * Other voltages available on request1012 / 10131013 Water Bath with circulation system, 14 litres? ? ? ? ? ?1 Perforated floor2 Water circulation3 Motor4 Rotary magnet5 Stirring magnet6 Water circulationAdditional technical data of models 1002 -1013Temperature regulation: Microprocessor-controlled Temperature constancy: ±0.1 °C temporalTemperature range: approx. 5 °C above ambient temperature to +99.9 °Cwith water level regulator 1919: approx. 3 °C above tap water temperature to +99.9 °COver-temperature cut-out: electronic, 4 °C above set temperature and electro-mechanical >130 °C Accessories1002-1008100526Test Tube Rackmade of stainless steel,with 20 openings of 18 mm Ø,for test tubes of 16/17 mm Ø,max. height 185 mmOrder No. 1920Capacities:Water Bath 1002 4 racks = 80 test tubesWater Bath 1003 / 1008 8 racks = 160 test tubesWater Bath 1004 12 racks = 240 test tubesWater Bath 1005 9 racks = 180 test tubesTest Tube Rackmade of stainless steel,with 5 openings of 31 mm Ø,max. height 185 mmOrder No. 1921Capacities:Water Bath 1002 4 racks = 20 test tubesWater Bath 1003 / 1008 8 racks = 40 test tubesWater Bath 1004 12 racks = 60 test tubesWater Bath 1005 9 racks = 45 test tubesAdjustable Water Level Regulatorto keep the water level constantand to cool Water Baths 1002-1008 (approx. 3 °C above tapwater temperature)Order No. 1919Milk Bottle Rackmade of stainless steel,with 12 openings of 56 mm Ø,for baby milk bottlesOrder No. 1942Capacities:Water Bath 1002 1 rack = 12 bottlesWater Bath 1003 / 1008 2 racks = 24 bottlesWater Bath 1004 3 racks = 36 bottlesWater Bath 1005 2 racks = 24 bottlesTest Tube Rackmade of stainless steel,with 20 openings of 13 mm Ø,for test tubes of 12 mm Ø,max. height 185 mmOrder No. 1922Capacities:Water Bath 1002 4 racks = 80 test tubesWater Bath 1003 / 1008 8 racks = 160 test tubesWater Bath 1004 12 racks = 240 test tubesWater Bath 1005 9 racks = 180 test tubesRack for Water Bath 1005made of stainless steel, especially suitable for warmingmedical hot packs.Order No. 1923Capacities:Water Bath 1005 up to 8 hot packs27Accessories1012/1013Test Tube Rackmade of stainless steel,with 20 openings of 18 mm Ø,for test tubes of 16/17 mm Ø,max. height 185 mmOrder No. 1920Capacities:Water Bath 1012 4 racks = 80 test tubesWater Bath 1013 8 racks = 160 test tubesTest Tube Rackmade of stainless steel,with 5 openings of 31 mm Ø,max. height 185 mmOrder No. 1921Capacities:Water Bath 1012 4 racks = 20 test tubesWater Bath 1013 8 racks = 40 test tubesAdjustable Water Level Regulatorto keep the water level constantand to cool Water Baths 1012-1013 (approx. 3 °C above tapwater temperature)Order No. 1919Milk Bottle Rackmade of stainless steel,with 12 openings of 56 mm Ø,for baby milk bottlesOrder No. 1942Capacities:Water Bath 1012 1 rack = 12 bottlesWater Bath 1013 2 racks = 24 bottlesTest Tube Rackmade of stainless steel,with 20 openings of 13 mm Ø,for test tubes of 12 mm Ø,max. height 185 mmOrder No. 1922Capacities:Water Bath 1012 4 racks = 80 test tubesWater Bath 1013 8 racks = 160 test tubesLid with openingsmade of stainless steel, with setsof rings made of heat-resistantplastic material. Number and diameter of openings can bechosen between 52 and 192mm, in steps of 20 mm.Increases the variability of theWater Bath and reduces the lossof heat when placing large vessels into the BathPrice available on requestplease state number and diameter of openingsWater Bath Protection AgentProAquaTop prevents the forma-tion of algae, bacteria andmould. Biodegradable and non-toxic.Highly efficient: only 1 ml per litre of water. A necessary change ofwater is indicated by fading of the blue colouration Order No. 1910Packing unit 1 bottle / Contents 200 ml. Order No. 1911Packing unit 3 bottles / Contents 3 x 200 ml Order No. 1912Packing unit 6 bottles / Contents 6 x 200 ml1002-1013Example281023Support Rodmade of stainless steel,length 316 mm, Ø 12 mmOrder No. 1985AccessoriesTest Tube Rackmade of stainless steel,with 100 openings of Ø 18 mm,for test tubesOrder No. 1933IndispensableFor gentle steaming work with Erlenmeyer flasks, glasses, etc., GFL Water Baths models Steam Bath 1023and Water Baths for fume hoods 1031 and 1032 havebecome indispensable in daily practice.Technical dataModel Interior dimensions Exterior dimensions Capacity Electrical Weight approx. PackingOrder Width Depth Working height Width Depth Height approx. connection* net gross volumem xorppagkgksertilmmmmmmmmmmmm.oN 31023 240 240 120 342 400 180 7 230 V / 50...60 Hz / 1.0 kW 9 12 0.10perforated floor to upper rim * Other voltages available on requestGFL Water Baths convince through their varied ranges of application. Forinstance, the Steam Bath’s square coverframe (W 265 mm x L 265 mm) isremovable. Its 9-part set of rings, madeof heat-resistant plastic material can be parted. Its diameter can be varied in approx. 20 mm steps (min. 32.5 /max. 173.5 mm).1023 Steam Bath, 7 litres29Specifications and features? Temperature range from approx.5°C above ambient to boiling point,temperature regulation throughtension thermostat. Heating element protected by over-tempe -rature cut-out.? 1023: bath, cover frame and perforated floor above the heatingelement are made of stainless steel. ? 1023: the adjustable water levelregulator is situated at the back ofthe unit. It is part of the standardscope of supply, as well as the set ofrings made of heat-resistant plasticmaterial.? 1023: outer housing made of electrolytically galvanised sheet steel,powder-coated. ApplicationsWater Baths for fume hoods 1031 /1032 are special baths that are prefe-rably used for protected applications in fume hoods (digestories).1031/ 1032Technical dataModel Openings Ø of the Working Exterior dimensions Electrical Weight approx. Packing volumeOrder with sets openings height ? Width Depth Height connection* net gross approx.No. of rings mm mm mm mm mm kg kg m 31031 6 91 100 430 300 155 230 V / 50...60 Hz / 1.5 kW 6.1 7.4 0.051032 8 111 100 670 300 155 230 V / 50...60 Hz / 1.5 kW 8.2 10.2 0.24? perforated floor to upper rim * Other voltages available on request1032 Water Bath for fume hoods1031 Water Bath for fume hoods? 1031/1032: bath, removable recessedlid with holes and perforated floorabove the heating element are madeof stainless steel.? 1031/1032: the adjustable waterlevel regulator at the right-hand sideof the unit is part of the standardscope of supply.? 1031/1032: the openings in the lidare covered by sets of rings made ofheat-resistant plastic material.? 1031/1032: four non-slip plastic feetensure great stability.? Especially suitableGFL Multiple Water Baths 1041 / 1042 are especially suitablefor gentle steaming work with columns, Erlenmeyer flasks or beakers. Even after years of continuous operation theyremain to be the most reliable laboratory aids.30ApplicationsChemical, clinical and biological labora -tories, both in research and industry, decide on our Multiple Water Baths whenever special quality and quantityrequirements are to be fulfilled.? The adjustable water level regulatoris on the left-hand side of the bath.It is included in the standard scopeof supply of the units.? Outer housing made of electrolyti -cally galvanised sheet steel, powder-coated.1041/1042Specifications and features? Temperature range from approx. 5 °C above ambient to boiling point, temperature regulation through tension thermostat. Heating elementprotected by over-temperature cut-out.? Bath interior, frame with openingsand parted perforated floor abovethe heating element are made of stainless steel.? The openings in the frame have adiameter of 130 mm and are covered by sets of rings made ofheat resistant plastic material.? A support rod of 600 mm lengthand a diameter of 12 mm, made ofstainless steel, is situated behindeach opening. It serves to fix thesteaming vessels securely.Technical dataModel Openings Ø of the Working Exterior dimensions Electrical Weight approx. Packing volumeOrder with sets openings height ? Width Depth Height connection* net gross approx.No. of rings mm mm mm mm mm kg kg m 31041 4 131 90 682 232 190 230 V / 50...60 Hz / 1.0 kW 12 15 0.121042 6 131 90 982 232 190 230 V / 50...60 Hz / 1.5 kW 16 20 0.15? perforated floor to upper rim * Other voltages available on request1042 Multiple Water Bath1041 Multiple Water Bath31ApplicationsHistological, chemical, clinical and bacteriological laboratories use this specialbath to stretch and dry cut tissues.Technical dataModel Temperatur Interior dimensions Exterior dimensions Electrical Weight approx. Packing volumeOrder range to Ø / H mm Ø / H mm connection* net gross approxNo. kg kg m 31052 ca. +80 °C 200 / 60 280 / 100 230 V / 50...60 Hz / 0.3 kW 2 5 0.03* Other voltages available on request1052Specifications and features? Exact temperature constancy of ±0.5° C.? Temperature range from approx. 5 °Cabove ambient to approx. +80 °C.? The low 100 mm height of the bath allows comfortable and safe working.? Bath interior made of aluminium, black anodised. Housing made of aluminium, powder-coated, with knob and scale of the temperature regulator, mains switch and two pilotlamps (green/yellow, for mains and heating).? The control thermometer with stainless steel holder is fixed on the rim ofthe bath.AccessoryDust guard lidmade of aluminium, black anodisedOrder No. 1950? Preferential choiceSpecial bath Tissue Float Bath model 1052 reliably fulfills everyday tasks inlaboratories. Its exact temperature regulation ensures evenly stretched cuttingswhich are clearly visible in the black anodised bath. The cuttings are carefullydried on the warmed rim of the bath, which is also black anodised.Summary of Laboratory Products32? Chest Freezers Page 3? Upright Freezers Page 3? Water Baths Page 21? Tissue Float Bath Page 31? Shaking Water Baths Page 33? THERMOLAB® Page 38? Incubators Page 41? Shaking Incubators Page 44? Hybridisation Incubator Page 48? Mini Incubator Page 50? Tube Roller Incubator Page 50? Shakers Page 53? Test Tube Rotator Page 64? Rotating Shaker Page 65? Water Stills Page 71Would you like to find out more detailsabout our range of products?Phone: ++ 49 - 5139 99 58 - 0Fax: ++ 49 - 5139 99 58 21E-Mail: info@GFL.deInternet: www.GFL.de"Precision in series" - a synonymfor a specialised range of fourShaking Water Baths that are in use all over the worldShaking Water BathsTHERMOLAB®33Qualitybuilt on TraditionIn the future, the success of a product spectrum of laboratorydevices that meet the toughestdemands on material, functioning anddesign will continue to be ensuredby experience of every-day use indetail, ongoing technical advancesand an excellent quality approach.The phrase „Quality built onTradition“ encompasses more than just the sum of impressive product innovations. It is also an ex pression of our corporate policy, which includes ahigh degree of ready-and-waitingservice as our primary customer-friendly service goal.This applies to all of the GFL laboratory products that are produced exclusively at our plant in Germany - Deep Freezers,Shakers, Incubators, Water Stills,Water Baths or Shaking Water Bathsalike.Users in research labs, standard and special labs for medicine, science and industry throughout the world have been profiting from the precision and dependability of our products for 45 years, all of which comply with valid European standards and bear the CE mark.Secure futureA vested quality demand in accordance with international standards is documented for all GFL laboratory products with the certification to DIN EN ISO 9001:2008,promoting more trust in the permanent high quality level of our products.In addition to the continuous optimisation of ongoing productionprocesses, the ISO obligation also calls for the commitment to quality awareness of our employeesand the continuous development and rapid implementation of preventive measures to ensure quality assurance at a high level.certified quality system34Specialists for special demandsThe product range of GFL ShakingWater Baths comprises four models,all of them specialised in differentwork processes. Models 1083 / 1086are designed for reciprocating motions, model 1092 for orbitalmotions. Shaking Water Bath 1070,with the patented brand name THERMOLAB ®, has four individuallyheatable basins and satisfies the mostsophisticated demands, too. GFL Shaking Water Baths are in use all over the world. They are regarded as highly reliable, with a superb performance and they are maintenance-free. Shaking Water Baths 1083 - 1092have been tested according to theGerman Equipment Safety Law, and all units bear the CE mark. The accessories to accommodate avariety of vessels can be easily and safely fixed in their shaking devices.The accessories shown in this brochureare not part of the standard scope of supply. The right of constructionalmodifications is reserved. Special makes are possible.1083 with reciprocating motion 36-371086 with reciprocating motion 36-371092 with orbital motion 36-371070with reciprocating motion 38THERMOLAB®Accessories 39Product-No. Motion PageContents35Shaking Water Baths by GFL are untir ing ? Precision in seriesGFL Shaking Water Baths are regarded as untiring all-purpose experts. Our product range is designed for precise heating-up processes and, simultaneously, gentle mixing or vigorous shaking. Models 1083, 1086 (with reciprocating motion) and 1092 (with orbital motion) are equipped with digital display of temperature and, according to the specifications, with digital display of shaking frequency and a cooling coil.Technical DataTemperature range: approx. 5 °C above ambient to +99.9 °C with water level regulator 1919: approx.3 °C above tap water temperature to +99.9 °CTemperature constancy (temporal): ±0,1 °CShaking motion: reciprocating, with on / off switch Shaking amplitude: 22 mmExterior dimensions (W x D x H):715 x 520 x 330 mmNet / gross weight: 28 / 32 kgPacking volume: approx. 0.29 m3? Order No. 10831083? No dripping back of condensate into the vessels due to double-walledinsulating lid with interior camber? Drain cock to empty the bathApplicationsWhenever exactly reproducible temperatures are required for shakingtasks, our Shaking Water Baths areused by standard and research laboratories. Their scope of applicationscomprises incubations, fermentations,homogenisations, chemical and biochemical reactions, enzyme and tissue studies.Specifications and Features? Microprocessor-controlled temperature regulation ensures fastheating up to the set temperatureand an excellent temperature constancy: ±0.1 °C, temporal? Optimum temperature distributionthroughout the whole bath interior? Temperature display and setting digitally via LED display, in 0.1 °Cincrements. Fast and exact setting,exact reproducibility of the presettemperature? Electronic monitoring of the temperature controller. In case of afault, the cause is displayed on the LED.? Over-temperature cut-out: electronic,4 °C above set temperature, andelectro-mechanical > 130 °C? Constant shaking frequency, independent of load, even when incontinuous operation? Maintenance-free and durable shaking device, electronically controlled and continuously settableshaking motion, gentle start-up. Inmodels 1083 and 1086, the shakingdevice is guided on corrosion-resistant special ball bearings.? Easily removable shaking rack? Bath interior and shaking rack madeof stainless steel36all-purpose expertsTechnical DataTemperature range: approx. 5 °C above ambient to +80 °C with water level regulator 1919: approx.3 °C above tap water temperature to +80 °CTemperature range: +10 °C to +80 °C Cooling coil: built-in as standard, forconnection to the water mains or to anexternal recirculating chiller Temperature constancy (temporal): ±0,1 °CShaking motion: orbital, with on / off switchShaking amplitude: 14 mm Shaking frequency display: digital-LED Exterior dimensions (W x D x H):635 x 505 x 400 mmNet / gross weight: 35 / 40 kgPacking volume: approx. 0.34 m3? Order No. 10921092 Technical DataTemperature range: approx. 5 °C above ambient to +99.9 °C with water level regulator 1919: approx.3 °C above tap water temperature to +99.9 °C Temperature range: +10 °C to +99.9 °C Cooling coil: built-in as standard, forconnection to the water mains or to anexternal recirculating chiller Temperature constancy (temporal): ±0,1 °CShaking motion: reciprocating, with on / off switch Shaking amplitude: 22 mm Shaking frequency display: digital-LEDExterior dimensions (W x D x H):715 x 520 x 330 mmNet / gross weight: 30 / 34 kgPacking volume: approx. 0.29 m3? Order No. 10861086Additional technical data of models 1083 / 1086 / 1092Interior dimensions (W x D x H): 450 x 300 x 160 mmVolume of bath interior: approx. 20 litresWorking height (incl. lid): 190 mmMax. water level aboveshaking cage / tray: 105 mm / 90 mmShaking frequency: from 10 - 250 rpm Over-temperature cut-out: electronic, 4 °C above set temperature, and electro-mechanical > 130 °C Housing: corrosion-resistant, made of electrolytically galvanised sheet steel, powder-coatedElectrical connection: 230 V / 50...60 Hz / 1.5 kW ** Other voltages on request371070? Individual and specialTHERMOLAB ®, a quadrothermal Shaking Water Bath with reciprocatingmotion, possesses an exceptional individuality in the market. It disposes of four separate basins in which different sample vessels canbe heated independently of each other, or which four different userscan use at the same time - saving both working space and time.38Technical DataTemperature range:approx. 5 °C above ambient to 99.9 °C Temperature setting and display: digital-LEDOver-temperature cut-out:electronic 4 °C above set temperature, andelectro-mechanical > 130 °CShaking motion: reciprocating, with on / off switchShaking frequency: from 2 - 50 rpm Shaking amplitude: 22 mm Working height: 80 mm Sample holders, height-adjustable: 32 mmDimensions sample holders: 128 x 128 mmInterior dimensions (W x D x H) per basin:175 x 175 x 100 mm Exterior dimensions (W x D x H):625 x 556 x 270 mmElectrical connection:230 V / 50...60 Hz / 1,3 kW Net / gross weight: 28 / 36 kgPacking volume: approx. 0.34 m3? Order No. 1070Specifications and Features? Microprocessor-controlled temperature regulation ensures fastheating up to the individually settemperature and an excellent temperature constancy: ±0.1 °Ctemporal? Electronic monitoring of the temperature controller. In case of afault, the cause is displayed on the LED.? Bath interior and shaking rack aremade of stainless steelHeight-adjustable sampleholder with rack for reactionvessels of 1.5-2.0 mlDouble-walled lid with inner camber have insulating capacityand prevent dripping back of condensate into the vessels? Maintenance-free and durable shaking device, electronically controlled and continuously settableshaking motion, gentle start-up.? With the use of optional racks ordirectly on the sample holders, allkinds of vessels from µl to ml used in laboratories, microtiter plates,cycler tubes, Western Blot vessels,centrifuge tubes, ampoules and bottles can be fixed.ApplicationsTHERMOLAB ® is universally applicable in standard, research and specialised laboratories; for example for all temperature-dependent reactions, forincubations of reagents and solutions,Enzyme-Immuno-Essays, Western-Blots,Reverse Dot Blots, for hybridisations at four different temperatures, for stringent washing processes with variable temperatures, RestrictionEnzyme Digestions, Proteinase-KDigestions, DNA Elution, T 7 SequenaseSequencing, for thawing processes and incubations of cultures or for polymerase chain reactions (PCR).39AccessoriesShaking Traymade of stainless steel, withholes to accept clamps forErlenmeyer flasks and otheraccessories. The tray has twohandles that reach above the water's surface, for easy inserting and removing from the bath Order No. 3960Shaking Water Baths 1083 / 1086 / 1092Test Tube Racksmade of stainless steel, with twohandles that reach above thewater's surface, for easy insertingand removing from the bathOrder No. 3920 for max. 243 tubes, Ø 16/17 mm, max. length 180 mmOrder No. 3921 for max. 63 tubes, Ø 31 mmOrder No. 3922 for max. 372 tubes, Ø 12 mm, max. length 180 mmClamps for Erlenmeyer flasksmade of stainless steel, to screw onto shaking tray 3960, supplied completewith fixing materialOrder No. 3983 for 25 ml flasks (52*)Order No. 3984 for 50 ml flasks (33*)Order No. 3985 for 100 ml flasks (22*)Order No. 3986 for 200 ml flasks (15*)Order No. 3987 for 250-300 ml flasks (13*)Order No. 3988 for 500 ml flasks (10*)Order No. 3989 for 1000 ml flasks ( 6*); raised lid required,price on request* maximum quantity of clamps per shaking trayRackmade of stainless steel, raisedtray, with 6 holding frames fortest platesOrder No. 3923Holder for 58 reaction vessels1.5 - 2.0 ml, with float protection, made of stainlesssteel, can be screwed onto tray 3960Order No. 3926 max. 3 holders per trayfor test tubes 15 ml with 19 bore holes of 17 mm Ø eachOrder No. 1711THERMOLAB ® 1070for test tubes 50 ml with 7 bore holes of 31 mm Ø eachOrder No. 1710for reaction vessels1.5 - 2.0 mlwith 32 bore holes of 12 mm Ø eachOrder No. 1712Test Tube Racksmade of stainless steel. The holding device can be tilted byan angle of 90 ° and is equippedwith springs for secure support.It can be screwed onto shakingtray 3960Order No. 3924 for example for Falcon tubes 15 ml, for max. 20 tubes Ø 12-17 mm, max. 4 racks per trayOrder No. 3925 for example for Falcon tubes 50 ml, for max. 12 tubes Ø 25-29 mm, max. 3 racks per trayAdjustable Water Level Regulatorto maintain a desired level ofwater (1083 / 1086 / 1092) andto cool Shaking Water Bath 1083(from approx. 3 °C above tapwater temperature)Order No. 1919Racks 1083 / 1086 / 1092 / 1070Water Bath Protection AgentProAquaTop prevents the formation of algae, bacteria and mould. Biodegradable andnon-toxic. Highly efficient: only 1 ml per litre of water. A necessary change ofwater is indicated by fading of the blue colouration. 3 Packing units:Order No. 1910 for 1 bottle / Contents 200 mlOrder No. 1911 for 3 bottles / Contents 3 x 200 mlOrder No. 1912 for 6 bottles / Contents 6 x 200 mlSummary of Laboratory Products40? Chest Freezers Page 3? Upright Freezers Page 3? Water Baths Page 21? Tissue Float Bath Page 31? Shaking Water Baths Page 33? THERMOLAB® Page 38? Incubators Page 41? Shaking Incubators Page 44? Hybridisation Incubator Page 48? Mini Incubator Page 50? Tube Roller Incubator Page 50? Shakers Page 53? Test Tube Rotator Page 64? Rotating Shaker Page 65? Water Stills Page 71Would you like to find out more detailsabout our range of products?Phone: ++ 49 - 5139 99 58 - 0Fax: ++ 49 - 5139 99 58 21E-Mail: info@GFL.deInternet: www.GFL.deState-of-the-art technique and first-class materials secure a top position in the market for our internationally renowned Incubators.Shaking IncubatorsMini IncubatorsHybridisation Incubator41Qualitybuilt on TraditionIn the future, the success of a product spectrum of laboratorydevices that meet the toughestdemands on material, functioning anddesign will continue to be ensuredby experience of every-day use indetail, ongoing technical advancesand an excellent quality approach.The phrase „Quality built onTradition“ encompasses more than just the sum of impressive product innovations. It is also an ex pression of our corporate policy, which includes ahigh degree of ready-and-waitingservice as our primary customer-friendly service goal.This applies to all of the GFL laboratory products that are produced exclusively at our plant in Germany - Deep Freezers, Shakers, Shaking Water Baths,Water Baths, Water Stills orIncubators alike.Users in research labs, standard and special labs for medicine, science and industry throughout the world have been profiting from the precision and dependability of our products for 45 years, all of which comply with valid European standards and bear the CE mark.Secure futureA vested quality demand in accordance with international standards is documented for all GFL laboratory products with the certification to DIN EN ISO 9001:2008,promoting more trust in the permanent high quality level of our products.In addition to the continuous optimisation of ongoing productionprocesses, the ISO obligation also calls for the commitment to quality awareness of our employeesand the continuous development and rapid implementation of preventive measures to ensure quality assurance at a high level.certified quality system42GFL Shaking Incubatorsmodels 3031 - 3033 ope-rate with state-of-the-artmicro processor techniqueand dispose of an interface module for comfortable remote control of measuring, controlling and regulatingtasks via PC.The built-in serial interface RS 232ensures smooth and easy data transfer, at the same time providingcompatibility of our Shaking Incubatorswith the PC software programme labworldsoft®.Among other features, this comprehen-sive software programme enables inde-pendent PC control and data analysis ofup to 64 laboratory appliances. Set andactual values are available as outputsignals.Data input is made online and can bedisplayed either graphically or numeri-cally. Complete measurement configu-rations can be memorized with allnecessary parameters for optimumegaP / seirosseccAegaPdaoLnoitoMoN tcudorP3031 Shaking Incubator with orbital motion 12 kg 44/45 463032 Shaking Incubator with orbital motion 12 kg 44/45 473033 Shaking Incubator with orbital motion 20 kg 44/45 477601 9484gk 5rotabucnI noitasidirbyH4010 –15/05gk 5rotabucnI iniM4020 1515/05gk 3rotabucnI relloR ebuT iniMContentsGFL - PC remote controlreproducibility. Ready-to-use measuringprocedures for various applications arepre-configurated and easily retrievable.System requirements:Hardware• Pentium 90 with at least 16 MB RAM, 8 MB free mainboard memory, mouse• VGA display: monochrome with atleast 16 grey shades or colourSoftware• Windows 95/98/2000/NT/ME/XP...The most progressive technique andfirst-class quality materials are usedto secure GFL Incubators a top posi-tion in the market. Three differentproduct ranges cover the most versa-tile appli cations in laboratories:Shaking Incubators (3), MiniIncubators (2) and a HybridisationIncubator.Our Incubators bear the CE sign, are maintenance-free and can be equipped with numerous accessories.Their stable and durable mechanismensures an especially silent operationand reliability in continuous mode. The microprocessor-controlled elec-tronics regulates the gentle start-upand exact shaking frequency.If not expressly stated, the accessoriesshown in the product pictures in thisbrochure are not part of the standardscope of supply. The right of construc-tional modifications remains reserved.Special makes are possible.43Heavy-duty SpecialistsIn every-day laboratory use GFL Shaking Incubators are renowned as beingextremely reliable and suitable for heavy-duty use. Model 3031, with lift-upacrylic glass cover, is made of an outer housing of heavy-duty ABS and powder-coated, electrolytically galvanised sheet steel. The shaking platform, made of aluminium, disposes of four plastic pins toaccept a shaking tray or a universal mount (accessories).The outer housings of models 3032 and 3033 are made of powder-coated, electrolytically galvanised sheet steel. Interior cabinet, the insides of the doorsand the shaking platform are made of stainless steel.The frame, permitting the use of two shaking trays, is part of the standard scope of supply. Shaking trays are accessories. A fluorescent lamp forinterior illumination is separated from the cabinet by a diffusing screen.44ApplicationsSpecialised in gentle mixing as well as vigorous shaking, GFL Shaking Incuba-tors are used for applications thatrequire exactly reproducible orbital motions and temperatures of up to +70 °C (temperature constancy ±0.2 °C,temporal).They are preferred by standard andresearch laboratories for incubations,fermentations, homogenisations, chemical and biochemical reactions,enzyme and tissue studies, as well asfor cultivating bacteria cultures.Specifications and FeaturesFast and exact temperature setting,exact reproducibility of set values,such as temperature, shaking frequency and incubation time, dueto microprocessor-technique.Optimum temperature distributionthroughout the cabinet interior.Serial cooling coil for applicationsbelow ambient temperature.Electronic monitoring of the tempe-rature regulators triggers visual andacoustic alarms in case of fault. The heating is switched off, thecause of the fault is shown on theLED display.Silent and robust shaking mechanismwith gentle start-up and even orbitalmotion, independent of load, setshaking frequency and incubationtime.Microprocessor-controlled timer forcontinuous display of the currentremaining running time of the incubation period, with acousticexpiry signal.Soft-touch keys with clear symbols.Adjustable over- and under-tempe-rature cut-out up to max 9.9 °C.Shaking IncubatorsTechnical DataShaking frequency: 10 - max. 250 rpm Shaking amplitude: 30 mm Load: up to 12 kg max. Volume / capacity:approx. 46 l / 1 shaking tray Interior dimensions (W x D x H):450 x 450 x 280 mm Exterior dimensions (W x D x H):525 x 665 x 570 mmElectrical connection:230 V / 50...60 Hz / 0.8 kW ** Other voltages on requestNet /gross weight: 38.5 kg / 50 kgPacking volume (cardboard box):approx. 0.51 m3Order No. 30313031Technical DataShaking frequency: 10 - max. 250 rpm Shaking amplitude: 25 mm Load: up to 12 kg max.Volume / capacity:approx. 45 l / 2 shaking trays, for vesselheight of more than 150 mm 1 shaking tray Interior dimensions (W x D x H):450 x 300 x 320 mm Exterior dimensions (W x D x H):710 x 650 x 710 mmElectrical connection:230 V / 50...60 Hz / 0.8 kW ** Other voltages on requestNet /gross weight: 70 kg / 80 kgPacking volume (cardboard box):approx. 0.86 m3Order No. 30323032Further technical data of models 3031 / 3032 / 3033Temperature range: from 8 °C above ambient temperature to +70 °C, serial cooling coil for operationbelow ambient temperature to connect to the water mains or to an external recirculating chillerTemperature range(Operation with cooling coil): +20 °C to +70 °C **** dependent on cooling media and ambient temperatureTemperature constancy (temporal): ±0.2 °CTemperature regulation: microprocessor-controlled, PID typeTemperature setting and display: digital - LED, in 0.1 °C increments Over-temperature cut-out: electronical / dependent on the set value, to protect the test substances, and electro-mechanically, to protect the unit Under-temperature cut-out: electronical, max. 9.9 °C below set temperatureShaking motion: orbital, can be switched on and offShaking frequency regulation: microprocessor-controlledShaking frequency displayand setting: digital - LEDIncubation time: microprocessor-controlled, 1 minute to 999:59 hoursTime display and setting: digital - LEDSerial interface: RS 232Technical DataShaking frequency: 10 - max. 250 rpm if only bottom tray is loaded;10 - max. 200 rpm if both trays are loadedShaking amplitude: 25 mm Load: up to 20 kg max. Volume / capacity:approx. 150 l / 2 shaking trays, for vesselheight of more than 180 mm 1 shaking tray Interior dimensions (W x D x H):674 x 540 x 430 mm Exterior dimensions (W x D x H):930 x 890 x 820 mmElectrical connection:230 V / 50...60 Hz / 0.8 kW ** Other voltages on requestNet /gross weight: 135 kg / 270 kgPacking volume (wooden crate):approx. 1.74 m3Order No. 3033303345Accessories303146Shaking Traymade of stainless steel, 450 x 450 mm, with holes toaccept clamps for Erlenmeyerflasks, test tube racks and holding frames for test plates.Order No. 3966Universal Mountfor secure fixing of different shaking objects between the sixrubber-coated bars.Order No. 3967Non-slip Rubber Matfor the shaking platform, 420 x 420 mm, for slow movingof e.g. of nutritions in Petri dishes.Order No. 3965Flask Clampsmade of stainless steel, forErlenmeyer flasks, to be screwedonto shaking tray 3966, complete with fixing material.Order No. 3983 for 25 ml flasks ( 79*)Order No. 3984 for 50 ml flasks ( 49*)Order No. 3985 for 100 ml flasks ( 36*)Order No. 3986 for 200 ml flasks ( 22*)Order No. 3987 for 250-300 ml flasks ( 16*)Order No. 3988 for 500 ml flasks ( 12*)Order No. 3989 for 1000 ml flasks ( 9*)Other clamps on request.* Maximum quantity of flask clamps per shaking trayTest Tube Rackmade of stainless steel, for testtubes, perforated part can be tilted by 90°, with clampingsprings for secure hold and silentshaking of the tubes, to be screwed onto shaking tray 3966.Order No. 3953for max. 24 tubes: 12 -17 mm Øcapacity of the shaking tray: 6 test tube racksOrder No. 3910Capacity of shaking tray: 6 test platesHolding Framemade of stainless steel, forattachment of a test plate, for screwing on to shaking tray 3966, complete with attachment materials47Accessories3032Shaking Traymade of stainless steel, 450 x 300 mm, with holes toaccept clamps for Erlenmeyerflasks, test tube racks and holding frames for test plates.Order No. 3970Capacity of the frame: 2 shaking traysShaking Traymade of anodised aluminium,670 x 537 mm, with 99 holes toaccept clamps for Erlenmeyerflasks, test tube racks and holding frames for test plates.Order No. 3980Capacity of the frame: 2 shaking trays30333032 and 3033Flask Clampsmade of stainless steel, forErlenmeyer flasks, to be screwed onto shaking trays 3970 and 3980, complete withfixing material.3032 3033Tray 3970 Tray 3980Order No. 3983 for 25 ml flasks (52) (99)Order No. 3984 for 50 ml flasks (33) (99)Order No. 3985 for 100 ml flasks (22) (50)Order No. 3986 for 200 ml flasks (15) (26)Order No. 3987 for 250-300 ml flasks (13)* (26)Order No. 3988 for 500 ml flasks (10)* (26)Order No. 3989 for 1000 ml flasks ( 6)* (12)*Order No. 3990 for 2000 ml flasks ( 3)* ( 9)*Other clamps on request.Quantities stated: Maximum quantity of flask clamps per shaking tray * 3032 (Shaking tray 3970): From clamps 300 ml only 1 tray applicable* 3033 (Shaking tray 3980): From clamps 1000 ml only 1 tray applicableOrder No. 3910Capacity of shaking tray 3970 (3032): 6 test platesCapacity of shaking tray 3980 (3033): 15 test platesHolding Framemade of stainless steel, forattachment of a test plate, for screwing on to shaking trays 3970 and 3980, completewith attachment materialsTest Tube Rackmade of stainless steel, for testtubes, perforated part can be tilted by 90°, with clampingsprings for secure hold and silentshaking of the tubes, to be screwed onto shaking trays 3970and 3980.Order No. 3953for max. 24 tubes: 12 - 17 mm Øcapacity of shaking tray 3970 (3032): 3 test tube rackscapacity of shaking tray 3980 (3033): 9 test tube racksIdeally suited for special casesThe GFL Hybridisation Incubator 7601 is a specialist for individual cases.The small quantity of hybridisation liquid that is required enables the userto work with high concentrations of probes or antibodies.Other applications are also possible. Instead of the rotating rack, theIncubator’s interior can be equipped with up to five non-tilt and pull-outtrays (accessories).The rotating rack to accept the hybridisation vessels is driven by a gearedmotor via a sliding clutch. It is easily removable and can be loaded outsidethe Incubator.48Hybridisation IncubatorTechnical dataTemperature regulation:microprocessor-controlled Temperature range:approx. 8 °C above ambient to +99.9 °CTemperature constancy (temporal): ±0.5 °CTemperature setting and display:digital - LED, in 0.1 °C increments Over-temperature cut-out:electronical / dependent on the set value,with visual alarm at 4 °C above the set temperature, and electro-mechanical > 130 °CRotations of the rotating rack:10 per minute, fixed Cabinet illumination:2 lamps at 15 Watt eachInterior dimensions (W x D x H):400 x 330 x 380 mm Exterior dimensions (W x D x H):585 x 630 x 650 mmElectrical connection:230 V / 50...60 Hz / 0.55 kW ** Other voltages on requestNet /gross weight: 45 kg / 54 kgPacking volume (cardboard box):approx. 0.51 m3Order No. 7601Specifications and FeaturesThe ventilator ensures optimum temperature distribution throughoutthe cabinet interior.Electronical monitoring of the temperature controller triggers avisual alarm in case of fault, i.e. ifthe set value is exceeded by 4 °C.The heating is switched off, thecause of the fault is shown on theLED displayThermostatic over-temperature cut-out to protect the heating element. High resolutions of the detectionsand even results due to the constancy of 10 rpm.Soft-touch keys with clear symbols.Protection against unintended alterations by two-finger-operation.7601Clear view of the interior cabinetthrough a large 16 mm thick heat-insulating acrylic glass window. Keysto switch on two cabinet lamps.The interior parts of the unit, such ascabinet walls, air baffle plate, interiordoor frame, rotating rack and theremovable drip tray under the rotating rack are made of stainlesssteel, the robust housing is made ofelectrolytically galvanised sheet steel.49ApplicationsIn every-day laboratory use ourHybridisation Incubator is successfullyemployed as an ideal appliance forexact hybridisations of DNA and RNAprobes with nucleic acid on filter paper(Southern / Northern Blots) and forincubations of protein blots with antibodies (Western Blots).Order No. 7940Two clip wheels are in the standard scope of supply.Perforated Traymade of stainless steel, can onlybe used instead of the rotatingrack; max. five trays.Order No. 7914Spring Clipsto fix the hybridisation bottles on the clip wheels. Two springclips are required for each bottle.The required fixing material issupplied with each clip.Order No. 7935 for ø 32 mm, (16/32)*Order No. 7936 for ø 38 mm, ( 8 /16)*Order No. 7937 for ø 51 mm, ( 8 /16)** maximum quantity of clips per clip wheel / required quantity of clipsEight spring clips 7937 are in the standard scope of supply.Clip Wheelmade of stainless steel, withholes for spring clips. Two moreclip wheels can be inserted todouble the capacity of shortervessels. Two clip wheels are required for safe and horizontalfixing.Order No. 7943 for ø 32 mm, 273 mm length ( 16*)Order No. 7944 for ø 38 mm, 273 mm length ( 8*)Order No. 7945 for ø 51 mm, 273 mm length ( 8*)* Capacity of the rotating rack (quantity of bottles)Four bottles 7945 are in the standard scope of supply.Special Hybridisation Bottlesmade of borosilicate glass, plastic screw cap with 0.5 mmbore hole in the middle for pressure compensation (also available without bore holes onrequest).7601AccessoriesProven and space-savingIn standard and research laboratories, our Mini Incubator 4010and the Tube Roller Incubator 4020 have meanwhile become indispensable. Due to their compact build, both models require only little space and are, therefore, very well suited for versatile applications directly on the workbench. Furthermore, their lift-up, see-through acrylic glass covers permit a clear view of the cultures in the interior cabinet.50Mini / Tube Roller IncubatorTechnical DataTemperature regulation:microprocessor-controlled Temperature range:approx. 8 °C above ambient to +60 °CTemperature constancy (temporal): ±0.2 °CTemperature setting and display:digital - LED, in 0.1 °C increments Over-temperature cut-out:electronical / dependent on the set value,with visual alarm at 4 °C above the setvalue, and electro-mechanical > 130 °CVolume: approx. 10 l Motion: rotating Frequency: 12 rpm fixed Maximum load: 3 kg Interior dimensions (W x D x H):230 x 300 x 140 mm Exterior dimensions (W x D x H):280 x 510 x 280 mmElectrical connection:230 V / 50...60 Hz / 0.3 kW ** Other voltages on requestNet /gross weight: 11.8 kg / 13.7 kgPacking volume (cardboard box):approx. 0.11 m3Order No. 40204020Order No. 40104010Technical DataTemperature regulation:microprocessor-controlled Temperature range:approx. 8 °C above ambient to +60 °CTemperature constancy (temporal): ±0,2 °CTemperature setting and display:digital - LED, in 0.1 °C increments Over-temperature cut-out:electronical / dependent on the set value,with visual alarm at 4 °C above the setvalue, and electro-mechanical > 130 °CVolume: 12 lMaximum load: 5 kg Interior dimensions (W x D x H)230 x 310 x 170 mm Exterior dimensions (W x D x H):280 x 510 x 280 mmElectrical connection:230 V / 50...60 Hz / 0.3 kW ** Other voltages on requestNet /gross weight: 9.9 kg / 11.8 kgPacking volume (cardboard box):approx. 0.11 m351Mini Tube Roller Incubator 4020disposes of a removable bottle rotating device, consisting of four parallel rotating axles each with tworubber rollers that can be moved along the axle.Hybridisation bottles with Ø 32 mm to Ø 76 mm canbe placed individually or in pairs (even with differentdiameters) between the rubber rollers; the use of tworoller bottles for cell cultures with Ø 110 mm and 285 mm length is possible.To place bottles of different diameters, the outer axlescan be placed into pre-fabricated seats without theuse of tools.Special Hybridisation Bottlesmade of borosilicate glass, toplace between the rubber rollers.Plastic screw cap with 0.5 mmbore hole in the middle for pressure compensation (also available without bore holes on request).Order No. 7943 for ø 32 mm, 273 mm lengthOrder No. 7944 for ø 38 mm, 273 mm lengthOrder No. 7945 for ø 51 mm, 273 mm length4020AccessoriesApplicationsThe Mini Incubator is very well suitedfor incubations that require exactlyreproducible temperatures, also for tempering, warming and drying of samples.The Mini Tube Roller Incubator is universally applicable for incubationsand hybridisations. It is equipped with a variable, removable flask rotating device, and provides even results andhigh resolutions of the detections evenwhen in continuous use due to its constant frequency of 12 rpm.Specifications and FeaturesThe ventilator ensures optimum temperature distribution throughoutthe cabinet interior.Electronical monitoring of the temperature controller triggers avisual alarm in case of fault, i.e. ifthe set value is exceeded by 4 °C.The heating is switched off, thecause of the fault is shown on theLED display.Thermostatic over-temperature cut-out to protect the heating element. Soft-touch keys with clear symbols.Protection against unintended alterations by two-finger-operation.Microprocessor-controlled temperatureregulation ensures fast reaching of set temperatures and high temperature constancy. Exact reproducibility of the set value byfast and exact temperature setting.Perforated tray, bottom tray (4010)and removable flask rotating device(4020) are made of stainless steel.Summary of Laboratory Products52? Chest Freezers Page 3? Upright Freezers Page 3? Water Baths Page 21? Tissue Float Bath Page 31? Shaking Water Baths Page 33? THERMOLAB® Page 38? Incubators Page 41? Shaking Incubators Page 44? Hybridisation Incubator Page 48? Mini Incubator Page 50? Tube Roller Incubator Page 50? Shakers Page 53? Test Tube Rotator Page 64? Rotating Shaker Page 65? Water Stills Page 71Would you like to find out more detailsabout our range of products?Phone: ++ 49 - 5139 99 58 - 0Fax: ++ 49 - 5139 99 58 21E-Mail: info@GFL.deInternet: www.GFL.deFor gentle motion, vigorousmixing or intensive shaking - you can choose between 15 quality products and five different types of shaking motion.Shakers53Qualitybuilt on TraditionIn the future, the success of a product spectrum of laboratorydevices that meet the toughestdemands on material, functioning anddesign will continue to be ensuredby experience of every-day use indetail, ongoing technical advancesand an excellent quality approach.The phrase „Quality built onTradition“ encompasses more than just the sum of impressive product innovations. It is also an ex pression of our corporate policy, which includes ahigh degree of ready-and-waitingservice as our primary customer-friendly service goal.This applies to all of the GFL laboratory products that are produced exclusively at our plant in Germany - Deep Freezers,Shaking Water Baths, Water Baths,Incubators, Water Stills or Shakersalike.Users in research labs, standard and special labs for medicine, science and industry throughout the world have been profiting from the precision and dependability of our products for 45 years, all of which comply with valid European standards and bear the CE mark.Secure futureA vested quality demand in accordance with international standards is documented for all GFL laboratory products with the certification to DIN EN ISO 9001:2008,promoting more trust in the permanent high quality level of our products.In addition to the continuous optimisation of ongoing productionprocesses, the ISO obligation also calls for the commitment to quality awareness of our employeesand the continuous development and rapid implementation of preventive measures to ensure quality assurance at a high level.certified quality system54GFL Shakers with themodel designation 3012,3014, 3017, 3018 and3020 are equipped both withmicroprocessor technique and with aninterface module for convenient datacontrol by I&C tasks via PC.Trouble-free data transfer is realised viathe built-in RS 232 port, making all ofthe units cited above compatible simultaneously, for example, to the PC software labworldsoft®.Using this software, up to 64 lab devices, among other things, can becontrolled independently of one another from a PC and all data evaluated.Specified and actual values are availableas output signals.Data acquisition is effected online andcan be presented either graphically ornumerically. Complete instrument configurations can be stored with all oftheir current parameters for optimumreproducibility. This allows you to callContentsGFL Unit Control by PCup pre-configured instrumentation flowdiagrams that are immediately ready foroperation for the most varying of tasks.System requirements:Hardware• Pentium 90 with at least 16 MBRAM, 8 MB free disk space, mouse• VGA display; monochrome displaywith at least 16 grey levels, or colourSoftware• Windows 95/98/2000/NT/ME/XP...There are 15 different model variantsof GFL Shakers with five types ofmotion. All of these models have theCE mark, are low-maintenance andhave the German TUV seal for„approved safety“ (GS) required bythe German device safety legislation. All of the device models are controlledeither digitally or by analogue means.Their stable, low-wear drive mechanismsensure a particularly smooth workingmotion and dependable, long-term service. The electronic system controlsthe soft start-up of the devices.GFL Shakers are marked by their capabilityto easily accommodate and fasten tothe shaking platform almost all shapesof vessels used in standard laboratoryapplications, thanks to the variety ofaccessories available for the devices.The accessories shown in the productillustrations in this catalogue are not partof the standard scope of supply for thedevices. All designs are subject to change.Special devices available on request.Product-No. Type of motion Max. load Page Accessories / Page3005 Orbital motion 8 kg 56 663006 Reciprocating motion 8 kg 57 663011 / 3012 Orbital rocking motion 15 kg 58 673013 / 3014 Rocking motion 15 kg 59 673015 / 3017 Orbital motion 15 kg 60 683016 / 3018 Reciprocating motion 15 kg 61 683019 / 3020 Orbital motion 30 kg 62 693023 Vibration Shaker with orbital motion 1.2 kg 63 __3025Test Tube Rotator max. with rotating motion 24 tubes 64 __3040 Rotating Shaker 20 kg 65 __553005? Power in a small packageIts use in everyday applications has already earned this model the motto „Great performance in a small package“. A powerful, quiet, space-savingmodel, versatile, either for gentle movement of liquids or vigorous mixing of the most varying materials. This unit is maintenance-free, carries the GS safety approval and comes with the CE mark.Technical DataOverall dimensions (W x D x H): 380 x 510 x 140 mmMoving platform: 330 x 330 mm Load: max. 8 kg Shaking motion: orbitalTimer: up to 60 minutes, or continuousoperation Shaking amplitude: 10 mm Shaking frequency: 20 - 500 rpm Electrical connection:230 V* 50...60 Hz, 65 W*Other voltages on requestNet/gross weight: 10/12 kgPacking volume (cardboard box): 0.1 m356ApplicationsThis compact Orbital Shaker proves itsperformance capability in daily use inbiology and microbiology laboratoriesand in diagnostic test reactions.Also used in laboratories, incubationrooms and moderating rooms atambient temperatures between +10 °Cand +50 ºC.Features? compact, low-wear counterbalanceddrive mechanism, ensuring high stability and dependability for continuous operation ? housing made of high impactstrength polystyrene, off-white varnish. The base plate is made ofelectrolytically galvanised, powder-coated sheet steel, the shaking platform of anodised aluminium,equipped with four plastic pins for secure attachment of accessoryequipment? an a.c. motor with overloadprotection drives the unit ? clearly laid out control panel for easyoperation? electronic speed control, stepless,with gentle start-up? constant speed during continuous operation, independent of load 3005 Analogue Orbital Shaker withUniversal Mount 3952? Order No. 30053006ApplicationsThis Shaker can be used in medical diagnostics or analysis, as well as forgrowing micro-organisms, cell and tissue cultures.This unit is used particularly in laboratories, incubation rooms andmoderating rooms at ambient temperatures between +10 °C and +50 ºC.Features? compact, low-wear counterbalanceddrive mechanism, ensuring high stability and dependability for continuous operation? housing made of high impactstrength polystyrene, off-whitevarnish. The base plate is made ofelectrolytically galvanised, powder-coated sheet steel, the shaking platform of anodised aluminium, equipped with four plastic pins forsecure attachment of accessoryequipment? an a.c. motor with overload protection drives the unit? clearly laid out control panel for easyoperation ? Space-saving and versatileWhat sets this robust, space-saving compact Shaker apart from the 3005 Shaker is its shaking motion. Its impressive features are both its gentle back-and-forth motion and its intensive shaking of liquids, especially in separating funnels. This unit is maintenance-free, carries the GS safety approval and comes with the CE mark.Technical DataOverall dimensions (W x D x H):380 x 510 x 140 mmMoving platform: 330 x 330 mm Load: max. 8 kg Shaking motion: reciprocating (back and forth) Timer: up to 60 minutes, or continuousoperation Shaking amplitude: 20 mm Shaking frequency: 20 - 300 rpmElectrical connection: 230 V* 50...60 Hz, 65 W*Other voltages on requestNet/gross weight 10/12 kgPacking volume (cardboard box): 0.1 m357? electronic speed control, stepless,with gentle start-up? constant speed during continuousoperation, independent of load3006 Analogue ReciprocatingShaker with Tray 3950 andClamps for separating funnels 3955 - 3959? Order No. 30063011 / 3012 ApplicationsIn AIDS research, for diagnostic testswith test plates, or for growing cell cultures and micro-organisms this unithas become indispensable.Also well-suited for use in laboratories,incubation rooms and moderatingrooms at ambient temperatures between +10 °C and +50 ºC.Features? compact, low-wear counterbalanceddrive mechanism, ensuring dependability for continuous operation with three-dimensionalmotion? housing made of high impactstrength polystyrene, off-white varnish. The base plate is made ofelectrolytically galvanised, powder-coated sheet steel, the shaking platform of anodised aluminium,equipped with four plastic pins forsecure attachment of accessoryequipment? an a.c. motor with overload protection drives the unit? 3011 - clearly laid-out control panelfor easy operation? 3012 - speed and remaining timeindicated by two LC displays? Gentle and quietGentle and uniform rocking motion make this quiet unit stand out in every-dayuse. Both of these units are maintenance-free, carry the GS safety approval andcome with the CE mark.Technical DataOverall dimensions (W x D x H):510 x 625 x 168 mmMoving platform: 450 x 450 mm Load: max.15 kg Shaking motion: three-dimensional orbital rocking Timer:3011 / up to 60 minutes, or continuous operation3012 / 1 min. - 99:59 hours, or continuousoperation Shaking amplitude: 3 degrees Shaking frequency: 2 - 50 rpm Electrical connection: 230 V**Other voltages on request 3011 / 50...60 Hz, 90 W3012 / 50 or 60 Hz**, 90 W**Please indicate when orderingNet/gross weight: 18/22 kgPacking volume (cardboard box): 0.19 m 358? 3011 - electronic speed control, stepless, gentle start-up? 3012 - microprocessor-controlled,adjustable in steps of 0.5 rpm, gentle start-up? constant speed during continuousoperation, independent of load 3011 Analogue Orbital Rocking Motion Shaker with Non-slip Mat 3965? Order No. 3011? Order No. 3012 with RS 232 port3013 / 3014 ApplicationsThis model has proven itself throughreliable and perfect work, also for continuous operation, and is always called upon when the best possiblesupply of parallel cultures and cell lines is required, or for staining or discoloration of gels.Both of these units are well-suited foruse in laboratories, incubation roomsand moderating rooms at ambient temperatures between +10 °C and +50 ºC.Features? compact, low-wear counterbalanceddrive mechanism, ensuring dependability for slow rocking motion ? housing made of high impactstrength polystyrene, off-white varnish. The base plate is made ofelectrolytically galvanised, powder-coated sheet steel, the shaking platform of anodised aluminium,equipped with four plastic pins forsecure attachment of accessoryequipment ? an a.c. motor with overload protection drives the unit? 3013 - clearly laid-out control panelfor easy operation 3014 - speed and remaining timeindicated by two LC displays? Dependable and long-lastingThese versatile Shakers use their slow and uniform rocking motion to create reproducible growth and processing conditions at low speeds for cell cultures and other media.This permits ideal rinsing and tumbling of the samples. Both of these units aremaintenance-free, carry the GS safety approval and come with the CE mark.Technical DataOverall dimensions (W x D x H):510 x 625 x 168 mmMoving platform: 450 x 450 mm Load: max.15 kg Shaking motion: rocking Timer:3013 / up to 60 minutes, or continuous operation3014 / 1 min. - 99:59 hours, or continuousoperationRocking amplitude: 3 degreesRocking frequency: 2 - 50 rpmElectrical connection: 230 V* *Other voltages on request3013 / 50...60 Hz, 90 W3014 / 50 or 60 Hz**, 90 W**Please indicate when orderingNet/gross weight: 18/21 kgPacking volume (cardboard box): 0.19 m359? 3013 - electronic speed control, stepless, gentle start-up 3014 - microprocessor-controlled,adjustable in steps of 0.5 rpm, gentle start-up ? constant speed during continuousoperation, independent of load3013 Analogue Rocking MotionShaker with Platform Frame 3968? Order No. 3013? Order No. 3014 with RS 232 port3015 / 3017ApplicationsWhat counts when growing micro-organisms, cell and tissue cultures is a„reliable colleague“ - an indispensableingredient for successful work in bio-chemistry, microbiology, biotechnology,bacteriology and virology.Both of these units are particularly well-suited for use in laboratories, incubation rooms and moderatingrooms in ambient temperatures between +10 °C and +50 ºC.Features? compact, low-wear counterbalanceddrive mechanism, ensuring high stability and dependability for orbitalshaking motion? housing made of high impactstrength polystyrene, off-white varnish. The base plate is made ofelectrolytically galvanised, powder-coated sheet steel, the shaking platform of anodised aluminium,equipped with four plastic pins forsecure attachment of accessoryequipment? an a.c motor with overload protection drives the unit? 3015 - clearly laid-out control panelfor easy operation 3017 - speed and remaining timeindicated by two LC displays? Universal and untiringA silent operating and universally applicable Orbital Shaker that exhibitsits untiring strength in particular for gentle motion and vigorous shakingof liquids. Both of these units are maintenance-free, carry the GS safetyapproval and come with the CE mark.Technical DataOverall dimensions (W x D x H):510 x 625 x 142 mmMoving platform: 450 x 450 mm Load: max.15 kg Shaking motion: orbital Timer:3015 / up to 60 minutes, or continuous operation3017 / 1 min. - 99:59 hours, or continuousoperation Shaking amplitude: 30 mmShaking frequency: 20 - 300 rpm Electrical connection: 230 V**Other voltages on request 3015 / 50...60 Hz, 65 W3017 / 50 or 60 Hz**, 65 W**Please indicate when orderingNet/gross weight: 18/22 kgPacking volume (cardboard box): 0.19 m33015 Analogue Orbital Shaker with Tray 3966 and Clamps for Erlenmeyerflasks 3983 - 399060? 3015 - electronic speed control, stepless, gentle start-up3017 - microprocessor-controlled,adjustable in steps of 1.0 rpm, gentle start-up? constant speed during continuousoperation, independent of load? Order No. 3015? Order No. 3017 with RS 232 port3016 / 3018ApplicationsThe producers of suspensions andemulsions know this shaker well. Theshaking platform’s jerky back-and-forthmotion creates high turbulence, thusthoroughly mixing the media. This is a vital prerequisite, for example, in medical diagnostics, or in foodstuffs or environmental analyses.Both of these units are well-suited foruse in laboratories, incubation roomsand moderating rooms in ambient temperatures between +10 °C and +50 ºC.Features? compact, low-wear counterbalanceddrive mechanism, ensuring high stability and dependability for reciprocal shaking motion? housing made of high impactstrength polystyrene, off-white varnish. The base plate is made ofelectrolytically galvanised, powder-coated sheet steel, the shaking platform of anodised aluminium,equipped with four plastic pins forsecure attachment of accessoryequipment? an a.c. motor with overload protection drives the unit? 3016 - clearly laid-out control panelfor easy operation3018 - speed and remaining timeindicated by two LC displays? Robust and variableVersatile, powerful and exceptionally quiet - those are the descriptive qualities of this robust Shaker with reciprocating (back-and-forth) motion.Use of this device is recommended for vigorous and intensive shaking ofclamped lying flasks, mixing flasks or separating funnels in continuousoperation. Both of these units are maintenance-free, carry the GS safetyapproval and come with the CE mark.Technical DataOverall dimensions (W x D x H):510 x 625 x 145 mmMoving platform: 450 x 450 mm Load: max.15 kg Shaking motion: reciprocating Timer:3016 / up to 60 minutes, or continuous operation3018 / 1 min. - 99:59 hours, or continuousoperationShaking amplitude: 30 mm Shaking frequency: 20 - 300 rpm Electrical connection: 230 V**Other voltages on request 3016 / 50...60 Hz, 65 W3018 / 50 or 60 Hz**, 65 W**Please indicate when oderingNet/gross weight: 18/22 kgPacking volume (cardboard box): 0.19 m361? 3016 - electronic speed control,stepless, gentle start-up3018 - microprocessor-controlled,adjustable in steps of 1.0 rpm, gentle start-up? constant speed during continuousoperation, independent of load3016 Analogue Back-and-forth Shakerwith Tray 3966 and Test Tube Racks 3953? Order No. 3016? Order No. 3018 with RS 232 port3019 / 3020ApplicationsImpressive references. For this powerfulorbital shaker leaves a lasting impressioneverywhere it has been used, for example,for analytical or diagnostic applicationsin the pharmaceutical industry, chemistry,biology, or in plant breeding or nutritionalapplications.Both of these units are well-suited foruse in laboratories, incubation roomsand moderating rooms in ambient temperatures between +10 °C and +50 ºC.Features? compact, low-wear counterbalanceddrive mechanism, ensuring high stability and dependability? housing made of high impactstrength polystyrene, off-white varnish. The base plate and the ? Indispensable and powerfulA dependable, long-life Orbital Shaker with a large shaking tray for accom-modating heavier loads. A universally applicable, quiet unit, indispensable in the growing of micro-organisms, cell and tissue cultures.This unit is well-suited for gentle motion or vigorous mixing of the mostvarying liquids, even in continuous operation, thanks to its useful shakingamplitude and the option of adjusting its speed. Both of these units aremaintenance-free, carry the GS safety approval and come with the CE mark.Technical DataOverall dimensions (W x D x H): 745 x 730 x 135 mmMoving platform: 676 x 540 mm Load: max. 30 kg Shaking motion: orbital Timer:3019 / up to 60 minutes, or continuous operation3020 / 1 min. - 99:59 hours, or continuousoperationShaking amplitude: 32 mm Shaking frequency: 20 - 250 rpm when the rack frame is used: 20 - 200 rpmElectrical connection: 230 V**Other voltages on request 3019 / 50...60 Hz, 90 W3020 / 50 or 60 Hz**, 90 W**Please indicate when orderingNet/gross weight: 34/40 kgPacking volume (cardboard box): 0.35 m33019 Analogue Orbital Shaker withRack Frame 3981, Trays 3980 (2), Test Tube Racks 3953 and Clamps forErlenmeyer flasks 3983 - 399062shaking platform are made of electro-lytically galvanised, powder-coatedsheet steel. The shaking platform isequipped with four support rodswith screw-type clamps for secureattachment of accessory equipment? a special rubber pad ensures a non-slip grip of objects on the shaking tray? an a.c. motor with overload protectiondrives the unit? 3019 - clearly laid-out control panelfor easy operation3020 - speed and remaining timeindicated by two LC displays? 3019 - electronic speed control, stepless, gentle start-up3020 -microprocessor-controlled,adjustable in steps of 1.0 rpm, gentle start-up ? constant speed during continuousoperation, independent of load? Order No. 3019? Order No. 3020 with RS 232 port302363ApplicationsReliable, versatile, efficient - the characteristics that make this Shaker so interesting for use in medical diagnostics, biotechnology or microbiology.This unit is well-suited for use in laboratories, incubation rooms andmoderating rooms in ambient temperatures between +10 °C and +50 ºC.Features? compact, low-wear counterbalanceddrive mechanism, ensuring high stability and dependability for continuous operation ? housing made of