Geocells TENWEB

GE0 025,1 - E – 02/10 TENAX TENWEB Type: 3/200 - 3/300 4/200 - 4/300 Geocells TENAX TENWEB geocells have honeycomb three dimensional structure, made of polyethylene using a single continuous extrusion process. It has a monolithic structure, very resistant to tensile forces. TENAX TENWEB can be expanded like an accordion; it can be transported and stocked in a very compact form, and expanded at the job site. Once expanded, TENAX TENWEB becomes dimensionally stable and provides an effective confinement for loose materials placed in each single cell. Typical applications Erosion control of slopes, embankment, lake and river banks; base stabilization for roads and parking areas. PHYSICAL CHARACTERISTICS UNIT DATA NOTES STRUCTURE THREE DIMENSIONAL HONEYCOMB MESH TYPE ABOUT HEXAGONAL STANDARD COLOR GREEN POLYMER TYPE POLYETHYLENE U.V. STABILIZER YES COMPACTED PANEL DIMENSION 12.50 x 0.22 m DIMENSIONAL CHARACTERISTICS OF EXPANDED PANELS TEST METHOD UNIT TENWEB 3/200 TENWEB 3/300 TENWEB 4/200 TENWEB 4/300 NOTES CELL INNER DIAMETER mm 200 300 200 300 a CELL HEIGHT mm 75 75 100 100 a CELL WALL THICKNESS ISO 9863 mm 1.0 1.0 1.0 1.0 a PANEL UNIT WEIGHT ISO 9864 kg/m² 1.15 0.80 1.60 1.10 a EXPANDED PANELS WIDTH m 3.50 5.00 3.50 5.00 a EXPANDED PANELS LENGTH m 10 10 10 10 a COVERED SURFACE m² 35 50 35 50 a COMPACTED PANEL WEIGHT kg 41 41 56 56 a COMPACTED PANEL ON PALLET n° 12 12 9 9 a TECHNICAL CHARACTERISTICS TEST METHOD UNIT TENWEB 3/200 TENWEB 3/300 TENWEB 4/200 TENWEB 4/300 NOTES PEAK TENSILE STRENGTH ISO 10319 kN/strip 1.20 1.20 1.20 1.20 b,c PEAK TENSILE ELONGATION ISO 10319 % 15 15 15 15 a,c JUNCTION TENSILE SHEAR STRENGTH ISO 13426 kN/junct 0.80 0.80 0.80 0.80 b,c JUNCTION TENSILE PEEL STRENGTH ISO 13426 kN/junct 0.35 0.35 0.35 0.35 b,c NOTES: a) Typical values b) Minimum values c) Test performed at constant rate of strain of 300 mm/min Typical Characteristics TENAX TENWEB The TENAX Laboratory has been created in 1980 and has been continuously improved with the purpose of assuring unequalled technical development of the products and accurate Quality Control, The TENAX Laboratory can perform mechanical, hydraulic and durability tests, according to the most important international standards like ISO, CEN, ASTM, DIN, BSI, UNI. TENAX SpA Geosynthetics Division Via dell'Industria, 3 I-23897 Viganò (LC) ITALY Tel. +39 039.9219307 Fax +39 039.9219200 e-mail: geo@tenax.net Web Site: www.tenax.net TENAX International B.V. Geosynthetics Division Viale S. Franscini, 19 CH-6900 Lugano SWITZERLAND Tel. +41 091.9233412 Fax +41 091.9237517 e-mail: geo@tenax.ch Web Site: www.tenax.net