Geotex 2x2 HF Product Data Sheet

product data • GEOTEX 2X2HFGEOTEX 2X2HF is a woven polypropylene geotextile containing heavy woven monofilament/fibrillated yarns produced by Propex, and will meet the following typical values when tested in accordance with the methods listed below. These characteristics make GEOTEX 2X2HF ideal for the construction of embankments over soft soils, steepened slopes, and modular block and/or wrapped-face retaining walls. The geotextile is resistant to ultraviolet degradation and to biological and chemical environments normally found in soils. GEOTEX 2X2HF conforms to the property values listed below.1 Propex performs internal Manufacturing Quality Control (MQC) tests that have been accredited by the Geosynthetic Accreditation Institute – Laboratory Accreditation Program (GAI-LAP).NOTES:1. The property values listed above are effective 04/2013 and are subject to change without notice.2. Values shown are in weaker principal direction. Typical2 PROPERTY TEST METHOD ENGLISH METRIC ORIGIN OF MATERIALS % U.S. Manufactured Inputs 100% 100% % U.S. Manufactured 100% 100% MECHANICAL Wide Width Tensile ASTM D-4595 2640 x 2460 lbs/ft 38.5 x 36.0 kN/m Wide Width Elongation ASTM D-4595 7% 7% Wide Width Tensile at 2% Strain ASTM D-4595 480 x 588 lbs/ft 7.0 x 8.6 kN/m Wide Width Tensile at 5% Strain ASTM D-4595 1212 x 1356 lbs/ft 17.7 x 19.8 kN/m Wide Width Tensile at 10% Strain ASTM D-4595 2340 x 2412 lbs/ft 34.2 x 35.2 kN/m CBR Puncture ASTM D-6241 1300 lbs 5783 N Trapezoidal Tear ASTM D-4533 125 lbs 556 N ENDURANCE UV Resistance % Retained at 500 hrs ASTM D-4355 80% 80% HYDRAULIC Apparent Opening Size (AOS)3 ASTM D-4751 30 US Std. Sieve 0.600 mm Permittivity ASTM D-4491 0.70 sec-1 0.70 sec-1 Water Flow Rate ASTM D-4491 50 gpm/ft2 2037 lpm/m2 ROLL SIZES 15.0 ft x 300 ft 4.6 m x 91.5 m