Geotex 701 - Brochure

Propex Operating Company, LLC · 6025 Lee Highway, Suite 425 · PO Box 22788 · Chattanooga, TN 37422 ph 423 899 0444 · ph 800 621 1273 · fax 423 899 7619 Geotex®, Landlok®, Pyramat®, X3®, SuperGro®, Petromat® and Petrotac® are registered trademarks of Propex Operating Company, LLC. This publication should not be construed as engineering advice. While information contained in this publication is accurate to the best of our knowledge, Propex does not warrant its accuracy or completeness. The ultimate customer and user of the products should assume sole responsibility for the final determination of the suitability of the information and the products for the contemplated and actual use. The only warranty made by Propex for its products is set forth in our product data sheets for the product, or such other written warranty as may be agreed by Propex and individual customers. Propex specifically disclaims all other warranties, express or implied, including without limitation, warranties of merchantability or fitness for a particular purpose, or arising from provision of samples, a course of dealing or usage of trade. © 2011 Propex Operating Company, LLC Product Data TESTED. PROVEN. TRUSTED www.geotextile.com GEOTEX® 701 is a polypropylene, staple fiber, needlepunched nonwoven geotextile produced by Propex, and will meet the following Minimum Average Roll Values (MARV) when tested in accordance with the methods listed below. The fibers are needled to form a stable network that retains dimensional stability relative to each other. The geotextile is resistant to ultraviolet degradation and to biological and chemical environments normally found in soils. GEOTEX 701 conforms to the property values listed below1. Propex performs internal Manufacturing Quality Control (MQC) tests that have been accredited by the Geosynthetic Accreditation Institute – Laboratory Accreditation Program (GAI-LAP). This product is NTPEP approved for AASHTO standards. MARV2 PROPERTY TEST METHOD ENGLISH METRIC ORIGIN OF MATERIALS % U.S. Manufactured Inputs 100% 100% % U.S. Manufactured 100% 100% MECHANICAL Tensile Strength (Grab) ASTM D-4632 180 lbs 801 N Elongation ASTM D-4632 50% 50% CBR Puncture ASTM D-6241 460 lbs 2047 N Trapezoidal Tear ASTM D-4533 75 lbs 334 N ENDURANCE UV Resistance % Retained at 500 hrs ASTM D-4355 70% 70% HYDRAULIC Apparent Opening Size (AOS)3 ASTM D-4751 70 US Std. Sieve 0.212 mm Permittivity ASTM D-4491 1.5 sec-1 1.5 sec-1 Water Flow Rate ASTM D-4491 110 gpm/ft2 4482 l/min/m2 ROLL SIZES 12.5 ft x 360 ft 15 ft x 300 ft 3.81 m x 109.8 m 4.57 m x 91.5 m NOTES: 1. The property values listed above are effective 04/2011 and are subject to change without notice. 2. Values shown are in weaker principal direction. Minimum average roll values (MARV) are calculated as the typical minus two standard deviations. Statistically, it yields a 97.7% degree of confidence that any samples taken from quality assurance testing will exceed the value reported. 3. Maximum average roll value. GEOTEX® 701 Propex Operating Company, LLC 1110 Market Street, Suite 300 Chattanooga, TN 37402 USAPH: 800-621-1273 F: 423-899-5005 PropexGlobal.com Geotex®, Landlok®, Pyramat®, X3®, SuperGro®, Petromat® and Petrotac® are registered trademarks of Propex Operating Company, LLC. This publication should not be construed as engineering advice. While information contained in this publication is accurate to the best of our knowledge, Propex does not warrant its accuracy or completeness. The ultimate customer and user of the products should assume sole responsibility for the final determination of the suitability of the information and the products for the contemplated and actual use. The only warranty made by Propex for its products is set forth in our product data sheets for the product, or such other written warranty as may be agreed by Propex and individual customers. Propex specifically disclaims all other warranties, express or implied, including without limitation, warranties of merchantability or fitness for a particular purpose, or arising from provision of samples, a course of dealing or usage of trade. © 2013 Propex Operating Company, LLC PRODUCT DATA • GEOTEX 701