Goulds Shallow Jet Pump - Brochure

JRS JRS5, JRS5H, JRS7 and JRS10SHALLOW WELL JET PUMPS - ½, ¾ AND 1 HP (60 HZ)TECHNICAL BROCHUREBJRSPAGE 2Residential Water SystemsGoulds Water TechnologyCanadian Standards AssociationLR38549®APPLICATIONSSpecifically designed for the following uses:• Homes • Cottages • Booster serviceSPECIFICATIONSPump:• Pipe connections: 1¼” suction and 1” discharge• Pressure switch: AS4 preset (30-50 PSI).Motor:• NEMA service factors• 60 Hz• ½ – 1 HP, 115/230 V capacitor start• Single phase• 3500 RPM• Built-in overload with automatic reset• Stainless steel shaft• Rotation: clockwise when viewed from motor endMaximum temperature: 140ºF.SYSTEM COMPONENTS• Basic Pump Unit: Includes pump with integral shal-low well jet (nozzle and venturi), motor, pressure switch and tubing.AGENCY LISTINGSFEATURESCompact: Design has an integral shallow well jet built into the casing, which eliminates the need for a separate shallow well adapter.Serviceable: • Back pullout design allows disassembly of pump for service without disturbing piping.• Two compartment motor for easy access to motor wiring and replaceable components.• Nozzle clean out plug in pump case.• Corrosion resistant, engineered plastic tubing and fittings are easily removed for cleaning. Premium O-ring design fittings need only be hand tight to seal.• O-ring casing sealDrain Plug: For ease of winterizing and maintenance.Seal Housing: Engineered composite. Corrosion and abrasion resistant.Impeller: F.D.A. compliant, glass filled Noryl®. Corrosion and abrasion resistant.Diffuser (Guidevane): F.D.A. compliant, injection molded, food grade, glass filled Lexan® for durability and abrasion resistance.Tubing and Fittings: F.D.A. compliant engineered plastic is corrosion and U.V. resistant.Powered for Continuous Operation: Pump ratings are within the motor manufacturer’s recommended working limits. Can be operated continuously without damage.Corrosion Resistant: Electro-coat paint process is ap-plied inside and out, then baked on.Excellent Air Handling Ability: After initial priming the pump has the ability to reprime itself even when air gets into the system. Pumping resumes once the water level rises above the foot valve.PAGE 3Residential Water SystemsGoulds Water TechnologyDIMENSIONS AND WEIGHTSPERFORMANCE RATINGS – SHALLOW WELL HP/Order No. ½ HP – JRS5 ¾ HP – JRS7 1 HP – JRS10 Nozzle AN018 AN018 AN018 Venturi AD3330 AD3336 AD3339 Discharge Pressure – PSI Discharge Pressure – PSI Discharge Pressure – PSI 20 30 40 50 30 40 50 30 40 50 60 5 14.1 13.3 10.5 5.8 64 22.5 17.9 12.4 69 27.0 22.4 15.7 9.6 72 10 12.4 12.0 9.2 4.2 59 20.3 16.3 11.5 65 24.5 20.5 14.8 7.5 69 15 10.5 10.0 8.0 2.4 56 17.8 15.3 9.0 63 21.2 19.2 12.6 5.1 66 20 8.6 8.5 6.6 1.2 53 14.8 13.6 7.3 61 17.6 16.8 11.1 3.3 63 25 6.7 6.5 5.0 0.6 51 11.5 10.8 5.2 58 13.4 13.0 8.7 – 61Total SuctionLift (feet)Gallons per minute Gallons per minuteMax. Shut-off (PSI) Gallons per minuteMax. Shut-off (PSI)Max. Shut-off (PSI)PERFORMANCE RATINGS – SHALLOW WELL, HIGH PRESSURE HP/Order No. ½ HP – JRS5H Nozzle AN020 Venturi AD3325 Discharge Pressure – PSI 20 30 40 50 60 70 80 5 6.7 6.4 6.2 5.8 4.2 2.5 0.8 84 10 5.8 5.6 5.3 5.1 3.7 2.0 NA 82 15 4.8 4.7 4.6 4.5 3.3 1.5 NA 79 20 4.0 3.8 3.7 3.6 3.1 1.3 NA 75 25 3.0 2.9 2.9 2.8 2.3 0.8 NA 74Gallons per minuteMax. Shut-off (PSI)Total SuctionLift (feet) (Inches) Order No. HP “C” Max. “B” Max. Width Height Wt. (lbs.) JRS5(H) ½ 10.81 37 JRS7 ¾ 11.56 6.31 9.15 8.0 42 JRS10 1 11.81 47Do not use for construction purposes.1 2 4 73 10 8 95 6Goulds is a registered trademark of Goulds Pumps, Inc. and is used under license. Noryl and Lexan are trademarks of GE Plastic.© 2012 Xylem Inc. BJRS March 2012Xylem, Inc.2881 East Bayard Street Ext., Suite ASeneca Falls, NY 13148Phone: (866) 325-4210 Fax: (888) 322-5877www.xyleminc.com/brands/gouldswatertechnologyCOMPONENTS Item No. Description 1 Nozzle 2 Venturi 3 Cast Iron Casing 4 Separator plate 5 Diffuser (Guidevane) 6 Impeller 7 Mechanical seal 8 Motor 9 Pressure switch 10 Seal housing