Grindex - (0.82 kW - 2) - Solid Electrical Submersible Sludge Pump Data Sheet

No: PD623281-INT Revision 1 2012.12 60 Hz SolidElectrical submersible sludge pump8123.281 001122334455667002020404060608080100100Q (l/s)(gpm)7 Q (l/s)(gpm)02468100510152025303512(m)39H (ft)1.2(kW)00.20.40.60.811.200.20.40.60.811.21.41.6P{ (HP)60hz60hzOther voltages on requestPump types Single phase Classification Electrical submersible drainage pump Protection class: IP 68 Electrical motor 1-phase: Squirrel cage induction motor 50 Hz: separate start and run capacitor 60 Hz: combined start and run capacitor Insulation class: F (IEC 85) Motor protection 1-phase: Temperature guard with a thermal contact in stator openingtemperature 135°C (275°F) Cable 1-phase: 3G1mm², 10 m (33 ft) / 16AWG/3, 50 ft Limitations Max. submersion depth: 10 m (33 ft) Max. liquid temperature: 40 °C (104 °F) Allowed pH range: 5 - 8 Maximum liquid density: 1100 kg/m³ (68 lbs/ft³)Shaft seals Double mechnical seals running in an oil compartment Material lower seal: silicon carbide - silicon carbide Material upper seal: carbon - aluminum oxide Bearings Ball bearings with C3 clearance Discharge connection 2´´ hose, BSP or NPSM Materials Pump top: Aluminium Outer casing: Aluminium Stator housing: Aluminium Motor shaft: Stainless steel Impeller: Polyurethane Pump housing: Polyurethane Screws and nuts: Stainless steel Accessories Float switchSpecifications can be changed without noticeISO 9906/AGrindex AB • P.O. Box 7025 • 174 07 Sundbyberg • Sweden • Ph: +46 8 606 6600 • Fax: +46 8 745 5328 • marketing@grindex.com • www.grindex.com60 Hz SolidDischarge connection 2´´Rated power P} [kW/HP] 0.82 / 1.1Max. power consumption P{ [kW] 1.1Shaft speed [r.p.m.] 3400Rated current at 115V 9.8 ARated current at 230V 4.8 ASolids passage 1½´´Dimensions A / B / C 510 / 200 / 280 mmDimensions A / B / C 20 / 8 / 11´´Weight [kg/lbs] 17 / 37.5