Grindex AB
- Home
- Companies & Suppliers
- Grindex AB
- Downloads
- Grindex - (1.5 - 2.2 kW - 3) - Minette ...
Grindex - (1.5 - 2.2 kW - 3) - Minette Electrical Submersible Drainage Pump Data Sheet
No: PD502172-INT Revision 0 2013.05 50 Hz MinetteElectrical submersible drainage pump8102.172
00551010151520001010202030304040505060607070Q (l/s)(m³/h)20 Q (l/s)(m³/h)0510152025(m)H3P{ (kW)00.511.522.53ph1ph3ph1phOther voltages on requestClassification
Electrical submersible drainage pump
Protection class: IP 68
Electrical motor
1-phase: Squirrel cage induction motor with start and run capacitor
3-phase: Squirrel cage induction motor
Insulation class: F (IEC 85)
Motor protection
1-phase: Temperature guard with a thermal contact in stator openingtemperature 125°C (257°F), air valve
3-phase: Phase sequence control, phase failure guard, temperatureguard with thermal contacts in the stator opening temperature 125°C(257°F) (= SMART system), air valve
Cable - SubCab
1-phase: 3G1,5mm², 20 m (66 ft) / 14AWG/3, 53 ft
3-phase: 4G1,5mm², 20 m (66 ft) / 14AWG/4, 53 ft
Limitations
Max. submersion depth: 20 m (66 ft)
Max. liquid temperature: 40 °C (104 °F)
Allowed pH range: 5 - 8
Maximum liquid density: 1100 kg/m³ (68 lbs/ft³)Shaft seals
Cartridge seal: pre-assembled double mechnical seal running in an oilcompartment
Material lower seal: silicon carbide - silicon carbide
Material upper seal: tungsten carbide - aluminium oxide
Bearings
Ball bearings with C3 clearance
Discharge connection
3´´ hose, ISO-G or NPT
Materials
Casted parts: Aluminium
Outer casing: Stainless steel
Motor shaft: Stainless steel
Impeller: Hard-Iron™
Suction cover: Hard-Iron™
Diffusers: Nitrile rubber
Screws and nuts: Stainless steel
O-rings: Nitrile rubber
Accessories
Float switch
Zinc anodes
Low suction collar
Pump raftSpecifications can be changed without noticeISO 9906/AGrindex AB • P.O. Box 7025 • 174 07 Sundbyberg • Sweden • Ph: +46 8 606 6600 • Fax: +46 8 745 5328 • marketing@grindex.com • www.grindex.com50 Hz 1-ph 3-phDischarge connection 3´´ 3´´Rated power P} [kW] 1,5 2,2Max. power consumption P{ [kW] 1,9 2,7Shaft speed [r.p.m.] 2830 2800Rated current at 230V 8,4 A 8,1 ARated current at 400V - 4,5 ARated current at 500V - 3,6 ASolids passage 9 mm 9 mmHeight / Diameter (mm) 676 / 240 / 9 mm 676 / 240 / 9 mmWeight 29 kg 29 kg
Most popular related searches
