GSE HD-12-20-40-40-60 Brochure

GSE STANDARD PRODUCTSThis information is provided for reference purposes only and is not intended as a warranty or guarantee. GSE assumes no liability in connection with the use of this information. Please check withGSE for current, standard minimum quality assurance procedures and specifications.GSE and other trademarks in this document are registered trademarks of GSE Lining Technology, Inc. in the United States and certain foreign countries.DS005 HD R01/07/08Product Data SheetGSE HD GeomembranesGSE HD is a smooth, high quality, high density polyethylene (HDPE) geomembrane produced from specially formulat-ed, virgin polyethylene resin. This polyethylene resin is designed specifically for flexible geomembrane applications. Itcontains approximately 97.5% polyethylene, 2.5% carbon black and trace amounts of antioxidants and heat stabiliz-ers; no other additives, fillers or extenders are used. GSE HD has outstanding chemical resistance, mechanical proper-ties, environmental stress crack resistance, dimensional stability and thermal aging characteristics. GSE HD has excel-lent resistance to UV radiation and is suitable for exposed conditions. These product specifications meet or exceed GRIGM13.NOTES:• +Note 1: Dispersion only applies to near spherical agglomerates. 9 of 10 views shall be Category 1 or 2. No more than 1 view from Category 3.• GSE HD is available in rolls weighing about 3,900 lb (1,769 kg)• All GSE geomembranes have dimensional stability of ±2% when tested with ASTM D 1204 and LTB of <-77° C when tested with ASTM D 746.• (1)Roll lengths and widths have a tolerance of ± 1%.• *Modified.Product Code HDE HDE HDE HDE HDE030A000 040A000 060A000 080A000 100A000Thickness, (minimum average) mil (mm) ASTM D 5199 every roll 30 (0.75) 40 (1.00) 60 (1.50) 80 (2.00) 100 (2.50)Lowest individual reading (-10%) 27 (0.69) 36 (0.91) 54 (1.40) 72 (1.80) 90 (2.30)Density, g/cm3 ASTM D 1505 200,000 lb 0.94 0.94 0.94 0.94 0.94Tensile Properties (each direction) ASTM D 6693, Type IV 20,000 lbStrength at Break, lb/in-width (N/mm) Dumbell, 2 ipm 114 (20) 152 (27) 228 (40) 304 (53) 380 (67)Strength at Yield, lb/in-width (N/mm) 63 (11) 84 (15) 126 (22) 168 (29) 210 (37)Elongation at Break, % G.L. 2.0 in (51 mm) 700 700 700 700 700Elongation at Yield, % G.L. 1.3 in (33 mm) 12 12 12 12 12Tear Resistance, lb (N) ASTM D 1004 45,000 lb 21 (93) 28 (125) 42 (187) 56 (249) 70 (311)Puncture Resistance, lb (N) ASTM D 4833 45,000 lb 54 (240) 72 (320) 108 (480) 144 (640) 180 (800)Carbon Black Content, % ASTM D 1603*/4218 20,000 lb 2.0 2.0 2.0 2.0 2.0Carbon Black Dispersion ASTM D 5596 45,000 lb +Note 1 +Note 1 +Note 1 +Note 1 +Note 1Notched Constant Tensile Load, hr ASTM D 5397, Appendix 200,000 lb 300 300 300 300 300Oxidative Induction Time, min ASTM D 3895, 200° C; 200,000 lb >100 >100 >100 >100 >100O2, 1 atmRoll Length(1) (approximate), ft (m) 1,120 (341) 870 (265) 560 (171) 430 (131) 340 (104)Roll Width(1), ft (m) 22.5 (6.9) 22.5 (6.9) 22.5 (6.9) 22.5 (6.9) 22.5 (6.9)Roll Area, ft2 (m2) 25,200 19,575 12,600 9,675 7,650(2,341) (1,819) (1,171) (899) (711)TESTED PROPERTY TEST METHOD FREQUENCY MINIMUM VALUEREFERENCE PROPERTY TEST METHOD FREQUENCY NOMINAL VALUEProduct Specifications