Guide to Bulk Solids Samplers Brochure 18.1.0

Automatic Samplers For Bulk SolidsFlakes • Granules • Pellets • Powderswww.sentry-equip.comMore Than 85 Years ofsaMpling experienceModel B1• Non-free flowing and free flowing materials, including sanitary products, from gravity chutes and hoppers• Powders, flakes, granules, powdered milk and pharma. products• Conformant to 3-A Sanitary Standards• Conformant to ATEX standardsModel R• Designed for sampling non-free flowing and free flowing material from pneumatic convey lines• Pellets, powders, flakes and granules• Isolated sample tube and auger capture a fixed sample volume• Conformant to ATEX standardsModel A• Free flowing materials from screw or drag conveyors• Pellets, flakes, granules, grain and seed• Conformant to ATEX standardsModel RPG• Recommended where degradation of product must be avoided• Non-free flowing and free flowing material from gravity chutes, hoppers, bins and end of conveyor belts• Powders, flakes, granules and friable materials• Sample cavity captures a fixed sample volume• Conformant to ATEX standardsModel PR• Designed for sampling free flowing material from pneumatic convey lines• Pellets, powders, flakes and granules• Isolated sample tube captures a fixed sample volume• Conformant to ATEX standardsModel SAH• Compact sampler samples from gravity chutes, hoppers, bins, air slides and fluid bed dryers in industrial or sanitary applications• Suitable for atmospheric, pressurized or vacuum installations• Pellets, powders, flakes, granules and friable materials• Sample cavity captures a fixed sample volume of 50 ccModel SAE• Compact sampler samples from gravity chutes, hoppers, bins, air slides and fluid bed dryers in industrial or sanitary applications• Suitable for atmospheric, pressurized or vacuum installations• Pellets, powders, flakes, granules and friable materials• Sample cavity captures a fixed sample volume of 100 ccModel SAK• Compact sampler samples from gravity chutes, hoppers, bins, air slides and fluid bed dryers in industrial or sanitary applications• Suitable for atmospheric, pressurized or vacuum installations• Pellets, powders, flakes, granules and friable materials• Sample cavity captures a fixed sample volume of 18 ccpoint samplersA point sampler takes a sample at one point in the product flow stream.isolok® seriesModel D2• Non-free flowing and free flowing materials from gravity chutes and hoppers• Pellets, powders, flakes and granules• Low height requirements• Conformant to ATEX standardsModel RB• Non-free flowing and free flowing materials from gravity lines, hoppers, bins, air slides, mixers and blenders• Pellets, powders, flakes and granules• Discharges material during entire sample cycle• Conformant to ATEX standardsModel RX• Free flowing materials from chutes, hoppers, bins and air slides• Pellets, powders, granules, grain, seed and friable materials• Conformant to ATEX standardsModel MG• Free flowing materials from gravity chutes and product lines• Pellets, powders, granules, grain, seed and friable material• Sample tube is easily removed for cleaning and inspection• Available in pneumatically and electrically driven versions• Conformant to ATEX standardsModel SA• Vertical spouts and chutes• Pellets, powders, flakes, granules, grain and seed• USDA, Canadian Grain, FGIS and NOPA approved design• Available with air or electric actuation• Conformant to ATEX standardsModel DS-3• Flexible mounting location; can be mounted anywhere along the belt• Conical sweeping sampling action drives a scoop through the material• Up to 16 cu. in. / 262 cc of sample per cut can be collected per cyclestrip samplersA strip sampler takes a sample of a strip across the product flow stream.conveyor belt samplercross cut samplerA cross cut sampler takes a sample of the entire area of the flow stream.For further information, contact:It is solely the responsibility of the end-user, through its own analysis and testing, to select products and materials suitable for their specific application requirements, ensure they are properly installed, safely applied, properly maintained, and limit their use to their intended purpose. Improper selection, installation, or use may result in personal injury or property damage.SENTRY® EQUIPMENT CORP 966 Blue Ribbon Circle NorthOconomowoc, WI 53066 USATel: 262-567-7256 • Fax: 262-567-4523E-mail:sales@sentry-equip.comWebsite:www.sentry-equip.comISOLOK is a registered trademark of Sentr y Equipment Corp.Hastelloy is a registered trademark of Haynes International, Inc.Monel is a registered trademark of Huntington Alloys Corporation.Kynar and Teflon are registered trademarks of E.I. Du Pont de Nemours and Company.Sampling systems for on-line analyzers• Sentry can design on-line sampler/analyzer systems to interface with a variety of particle size analyzers and moisture sensors• Each system provides a representative sample from the main process stream and precisely conditions and feeds the sample to the analyzer• A programmable or hard-wired controller interfaces between the Sentry sample/feed system and the analyzercontrollersModel IC• Multiple position indexing cabinet designed for collecting either individual or composite samples• Available in 8, 16, and 24 collection positions• Controlled by a PLC; interfaces with the sampler controller• Offered with TEFC or explosion-proof motorFor additional details on specific samplers, available construction materials, and other technical information, individual cut sheets are available from Sentry’s authorized representatives and web site: www.sentry-equip.comControllers• PLC-based controllers allow manual, automatic, or continuous sample cycling• Standard controller housing is Nema 4X; however, other enclosures are available18.1.0 Rev. 5 10/13Sample Containers• Sentry supplies sample containers of polyethylene or stainless steel; containers are available for pressurized applications• Container capacities range from 32 ounces to 2.5 gallons (0.9 to 9.5 liters)indexing cabinetsampler optionsAlloys and Coatings• Special alloys include Hastelloy®, Monel®, Kynar®, Titanium, etc.• Coatings for sample tubes include QPQ and Nickel-impregnated Teflon®