Haskel - 5000 psi - Booster Pump Brochure

SERVICE FACILITIES THROUGHOUT THE UNITED STATES 11/08 HASKEL BOOSTER PUMP Part #58985-2 fills up to 6000 psi Other models available 15” H x 33” L x 18”W Less than 60 lbs weight Boost production—up to 40% more SCBA refills from your cascade. Especially useful for MOBILE SYSTEMS Driven with cascade Air * Mounts in any position Can be used without cascading * May also be driven with alternate 100-150 psi air source This unit needs NO outside power source and is virtually MAINTENANCE FREE INCLUDED: Complete Booster Unit Automatic Pressure Regulator High Pressure Line to and from Booster (up to 8 feet) High and Low Pressure Gauges Safety Relief Valve Automatic Control System Pressure Switch Suggested purchasing specifications are on the back of this page Make a Little Pressure Do a Big Job 4400 PSI 50+ SCFM 3000 PSI 25 SCFM 2400 PSI 20 SCFM 1800 PSI 14 SCFM 1200 PSI 10 SCFM 600 PSI 4 SCFM CHARGING RATES: When cascade pressure equals left column, the booster pumps the rate at right BREATHING AIR SYSTEMS Division of SUB-AQUATICS, INC. 8855 E. Broad St., Reynoldsburg, OH 43068 - Phone: (614) 864-1235 SALES: 1-800-937-2479 FAX: 614-864-0071 WEBSITE: www.breathingair.com Ocala, FL Chattanooga, TN Moweaqua IL Michigan Center, MI (352) 629-7712 (423) 634-3184 (217) 768-4408 (517) 783-4060 Fax: (352) 401-9501 Fax: (423) 634-3185 Fax: (217) 768-3351 Fax: (517) 783-4073 SUGGESTED PURCHASING SPECIFICATIONS Made in America HASKEL BOOSTER PUMP 5000 psi #58985-1, or equivalent HASKEL BOOSTER PUMP 6000 psi #58985-2, or equivalent 1 Booster unit to be self contained on one base plate with no moving parts exposed to the operator. It is to be supplied in a ready to operate condition with only one hook-up required. 2 Booster shall be air-driven and powered from the same air supply which is furnished to it to boost. It shall be capable of boosting a supply of as low as 1000 psi to a maximum of as much as 5000 psi (or 6000 psi), at a rate up to 50 cfm. (Speed will vary depending on inlet pressure.) 3 The system shall be designed so as to avoid high operating temperatures and the compression chambers are to be non-oil lubricated so as to avoid contamination of the boosted air. It shall be capable of continuous operation. 4 All components on the high pressure side of the unit are to be constructed of stainless steel. An approved safety valve is to be incorporated in the high pressure side. 5 The output pressure shall be controlled by an automatic (adjustable) regulator, to control the output from 2000 psi to 5000 psi. 6 Maintenance areas are to be easily accessible and normal maintenance within the scope of non-technical shop personnel. 7 A complete operator’s manual, schematic and parts list are to be supplied with the unit. 8 Warranty is for one full year. 9 The supplier is to be an established dealer and service center in this type of equipment and have parts available at all times. Prices and Specifications are subject to change without notice