HealthPro Plus

105.01.00.06 IQ TS HPP NE 120V USATechnical Speci?cations: IQAir® HealthPro® Plus NEPower requirementsEnergy consumption, 6 fan speeds*DimensionsWeight, system incl. ?ltersAir delivery, incl. ?lters, 6 fan speeds*Sound pressure/power level, 6 fan speeds**Fan motorControl panelAir intakeAir outletColor of main housing / locking armsHousing materialOperating temperature / humidityElectrical safety certi?cationWarrantyTotal system e?ciencyAir delivery (certi?ed)Leak testedSurface area: 30 sq.ft. (2.8 m2)***Weight: 5 lbs. (2.5 kg)***Surface area: 53 sq. ft. (5.0 m2)***Display languagesIntelligent ?lter life monitorAdvanced timerAdvanced fan speed selectionSupplied accessoriesOptional accessoriesGeneral Speci?cations100-120 V, 50/60 Hz 27, 53, 92, 121, 154, 215 Watt; Standby: <1 WattH 28" x W 15" x D 16" (H 71 x W 38 x D 41 cm) 35 lbs. (16 kg) 40, 75, 130, 170, 200, 300 cfm (70, 130, 220, 290, 340, 510 m3/h)LP 25, 36, 44, 50, 54, 59 dB(A); LW 35, 46, 54, 60, 64, 69 dB(A)centrifugal, backward curved, with thermal protector, non-stop use approved4-key touch-pad with 16 character 2-line LCD displaydual arches at base of system320° EvenFlow™ di?userlight gray / whiteE?ciency: = 55% at = 0.3 microns (EN 779 class F8)Average ?lter life: approx. 18 months (based on average daily usage of 10h on speed 3)****non-o?gasing, impact-resistant, UV-stabilized ABS41° to 104° F (5° to 40°C) / 5% to 95% non-condensingCSA rated for continuous operation under applicable UL and CSA standards, BSMI5 years on parts and labor (excluding ?lters)= 99.97% for particles = 0.3 microns (individually tested), = 99.5% at = 0.003 micronsyes (individually tested with all ?lters installed)Media: non-woven glass micro?ber, medical-grade HyperHEPA® ?lter, non-o?gasing separatorsE?ciency: = 99.97% at = 0.3 microns (EN 1822 class H12/13)yesEN 1822 classi?cationHEPA class H13 - MPPS e?ciency: = 99.95% @ 0.22 microns at air?ow rate = 112 cfm (190 m3/h)HEPA class H12 - MPPS e?ciency: = 99.50% @ 0.16 microns at air?ow rate = 280 cfm (475 m3/h)Pre-?lterPreMax™ Filter F8 (S)Purpose: control of coarse and ?ne particulate matter; protection of subsequent ?ltersMedia: non-woven glass micro?ber, mini-pleated for high-capacity, non-o?gasing separatorsyes (allows programming of di?erent fan speeds for 2 di?erent time periods)remote control (incl. battery), power cord with plug, casters, certi?cate of performanceGas & odor ?lterV5-Cell™ Filter MG Purpose: control of a wide range of chemical contaminants and odorsMedia: MultiGas™ granulated activated carbon & impregnated activated alumina (AC/4 + IA/4)Average ?lter life: approx. 2 years (based on average daily usage of 10h on speed 3)****Main particle ?lterHyperHEPA® Filter H12/13 (L)Purpose: control of ?ne & ultra-?ne particulate matterFlexVac & VM FlexVac mobile & wall-mounted source capture kits, InFlow & OutFlow positive/negative pressure duct kits, PF40 coarse dust pre-?lter, VMF wall-mount bracket.* per fan speed measured at 120V, 60Hz; tolerance: ± 10% (± 6 cfm); ** tolerance: ± 3 dB(A); *** tolerance: ± 10% **** ?lter life can vary based on actual usage and pollution levelsAll technical speci?cations are subject to change without prior notice.PerformanceFilter Con?gurationFeaturesAverage ?lter life: approx. 4 years (based on average daily usage of 10h on speed 3)****4 user-selectable languages: English, French, German, Spanishyes (monitors actual usage of each individual ?lter), 3 ?lter life status LEDsyes (allows programming of operating hours and weekdays)