HEATH - DetectoPak Infrared (DP-IR) Datasheet

The HEATH Detecto Pak-Infrared (DP-IR™) is a highly advanced technology capable of detecting methane without false alarming on other gases. The DP-IR is the latest of a new generation of leak survey instruments from HEATH that will greatly improve the productivity and safety of a walking/mobile survey. The DP-IR functions by using an infrared optical gas detection sys-tem. This instrument is intended to replace the current surveying equip-ment using the traditional Flame Ionization with next generation tech-nology utilizing a simple light beam, eliminating the need for expensive gas cylinders and refill systems. It is designed to be selective to de-tecting methane only, and will not false alarm on other hydrocarbon gases. A New Look In Leak Survey1-800-HEATH-USwww.heathus.comThe DP-IR operates under a va-riety of environmental conditions including cold or hot weather. Its rugged design will stand up to normal field use and operating conditions. The DP-IR has built-in Self-test and Zero functions that will assure that the instrument is operating prop-erly. Using the internal calibration cell, the operator can perform the self-test as part of a daily start up routine. While in operation, the DP-IR continuously monitors sev-eral parameters to ensure that the instrument is functioning properly. Should any of these parameters go outside of the operational limits, an audible alarm will sound and a Fault/Warning error message will be displayed.DP-IR Kit includes:Carrying case, battery charger, shoulder strap, survey probe, bar hole probe, dust filters, water filter and CD manual.Detection Method: Infrared Controlled Interference Polarization SpectrometerMeasurement Range: 0 to 10,000 PPM 0 to 100% GasDisplay Range: Auto Ranging: Manual Ranging: PPM: 0-10,000 PPM scale: 0-10,000 %Gas: 1-100% %Gas scale: 0-100%Sensitivity: 0-1000 PPM: 1 PPM 1000-10,000 PPM: 5 PPM 1-100%Gas: 0.5%Accuracy: Greater of +/-.5% or +/-10% of reading (typical, std condition) (%gas on manual mode Detection Alarms Modes: Digital Methane Detection (DMD): Audible tone when detection threshold exceeded. Adjustable Alarm Level from 1 to 9,000 PPM Tick: Continuous audio tone relative to concentrationSystem Fault Warning: Audible tone and indication on the displaySelf Test & Calibration: Built in Self Test and Calibration function verifies operation and adjusts calibration for maximum sensitivity. Test gas cell integrated within the instrument.Compliance: EN 61326-1 Conducted Emissions Class B EN 61326-1 Radiated Emissions Class B EN 61000-4-2 4kV/8kV ANSI C63.4 Class B EN 61000-4-3 3 V/M FCC 47 CFR Part 15 Class B Dust Filter: Replaceable filter provides dust protection. Easy change out quick disconnect filter cap.Display: Large easy to read backlit LCD (.75” Numeric) Operating Temperature: 0 to + 122 F (-17 to 50 C) (nominal battery voltage)Humidity: 5 to 95% RH, non-condensingEnclosure: IP54 (Water splash and Dust resistant)Instrument Weight: 5.6 lbs.Carry Case: 13 lbs empty; 21lbs filled 24.5” x 21” x 9” Power Supply: Internal rechargeable Li-ion battery or External 12vdc car battery with power conditionerBattery Operating Life: 8 hours at 32º F with out backlight onBattery Charger: External, in-line, 110 - 240 VAC, 50 / 60 hertz. 10 hours to 90% chargeShoulder Strap: Single over the shoulder padded strapAlarm Volume: 108 dBs @ Alarm port (A-fast)Survey Probe: Quick connect fitting with locking clasp. Adjustable length from 25” to 41”Bar hole Probe: Std: 20”; Optional 36”Intrinsic Safety: Class I Division I Group D T3 UL 913 MetLab #E112840Heath Consultants Incorporated1-800-HEATH-US • www.heathus.com10/11