HI 3030 - Multi-Scale Weight Controller Brochure

THE STAND-ALONE SOLUTIONLet’s again take the example of the eight storage tanks, but this time you wish to control tank weights outside of the PLC. No problem With or without a connection to the PLC, you can set up the HI 3030 to automatically refill each of the storage vessels when they get to their individual “low” levels. Now, you can also save on programming costs.COMPLETE FLEXIBILITYWith the flexible I/O mapping and twelve independent internal setpoints in the HI 3030, you can direct alarms or enunciators to a local output or to any point on the plant network.You can even have an alarm emailed directly to you Don’t need a display or keypad on the controller? Use the Blind Remote HI 3030R, and control or configure the unit via your web browser or your local network. INTEGRATED TECHNICIAN®The HI 3030's INTEGRATED TECHNICIAN, used in conjunction with an IT Junction Box, provides built-in system diagnostics that enable you to troubleshoot and diagnose your weighing system right from its front panel or a web browser. You can read individual load sensor voltages and weights, make comparisons, and isolate individual system components for quick and easy troubleshooting.ApplicationsPROCESS WEIGHING• Batching/Blending• Filling/Dispensing• Level-by-Weight• Check Weighing• Weight MonitoringFeaturesWAVERSAVER®• Ignores vibration on and around scalesC2® Electronic Calibration• Electronic calibration without test weightsINTEGRATED TECHNICIAN®• Weighing system monitoring and troubleshootingSMM-SD (Secure Memory Module with SD RAM)• Expandable automatic backup of configuration data for easy transfer to other instruments or your PCNetwork Flexibility• Connect via common plant networks• Use it as a DeviceNet Master• Use it as a gateway between networksThe Hardy HI 3030 is a flexible weight controller that can monitor and control up to four scales simultaneously. It can act as a front end to a PLC, PC or DCS system for applications such as level, batching, filling, dispensing, and check weighing, or as a stand alone for simple control or weight monitoring.NETWORKINGAs a bridge to a PLC, its four scales can share one network connection, whether it is DeviceNet, ControlNet, EtherNet/IP, Profibus or Analog. You can also link additional HI 3030s with their multiple scales and share the same network connection. Just like the other Series 3000 products, you can also configure or monitor the HI 3030 using a web browser or network interface.THE PLC SOLUTIONImagine you have eight storage tanks and would like to monitor and control the weight in each of the tanks using your PLC. You could buy two HI 3030s, each with four scale inputs and tie them together with the built-in Ethernet communications. Bring all eights scales back to your PLC using just one of the HI 3030s and one of its optional technologies:DeviceNet,ControlNet, Profibus, or EtherNet/IP network card. If you are in need of more than eight storage tanks, you can connect up to 16 controllers, for a total of 64 scales, through that same single interface.You save wiring, time, and money.www.hardysolutions.com • 800-821-5831Multi-Scale Weight Controller HI 3000 SeriesAll information within is subject to change without notice. Visit our website for latest specifications. WAVERSAVER, C2, IT, THE BUTTON, ADVANTAGE and ANY-WEIGH are registered trademarks of Hardy Process Solutions, Inc.. Allen-Bradley and Encompass are trademarks of Rockwell Automation, Inc. All other trademarks or registered trademarks are the property of their respective owners.NETWORK CONFIGURATIONSwww.hardysolutions.com • 800.821.5831MODELSHI 3030 HI 3030R Blind Remote-LC Single scale-JB Single scale with built-in junction box-2S Dual scale-4C Four scaleOPTIONS- Built-in junction box - Profibus- Enviromental rear cap - ControlNet - Swivel mount bracket - DeviceNet master scanner/slave - DC power - Modbus TCP- DC relay outputs - EtherNet/IP- Multiple analog out Display• 4 line x 20 character backlit LCD• 5 x 7 dot matrixUpdate Rate• 55 times per second Averaging• Sliding up to 250 readings in single unit incrementsResolution• Display: 1:985,000 (3mV/V load cells)• Internal: 1:1,048,000Standard Interfaces• Ethernet: 10/100base T; embedded web server• Serial RS 232: simplex to printer Stable Weight Reading• WAVERSAVER® 0.25Hz minimumCalibration Techniques• C2® electronic calibration• Traditional calibration with test weightsInstrument Local I/O• Five mappable inputs optically isolated• Four or seven mappable outputs 48-240VAC Form A• Third party mappableLoad Point Excitation• 5VDC power drives up to 16 350-ohm load cellsPower Requirement• 108-264VAC, 47-63Hz or 12-24 VDC• 25 watts maxOperating Temperature• -10° to +50°C (14° to 122°F)Storage Temperature• -20° to +70°C (-4° to 158°F)Enclosure• Panel mount• Swivel mountDimensions• Panel mount: 6.03" (153mm) with rear cap• Panel cutout: 8.94" W x 6.63" H (227mm W x 169mm H)Approvals• CE, UL/CUL, NTEP, Canada Weights & MeasuresWarranty• Two-year warranty against defects in workmanshipAll specifications subject to change without notice. Please contact the Hardy factory or visit our website for the latest specifications.SPECIFICATIONSHardy Process Solutions9440 Carroll Park Dr.San Diego, CA 92121tel. +1-858-278-2900tel. 800-821-5831fax +1-858-278-6700www.hardysolutions.comhardyinfo@hardysolutions.comSince 1993HI 3030 0711 0400-0003-01BHI 3010FillingHI 3010HARDY CONTROL-LINK NETWORKHardy Bench Scales, Floor Scales and Load PointsHardy carries a wide variety of strain gauge load points and scale bases to accommodate your application requirements.Hardy C2 Certified CableThis 8-conductor cable is designed for optimizing weight and load sensor characteristic signals from the junction box to the instrument.Hardy Junction Box (HI 215IT Series) with INTEGRATED TECHNICIAN This NEMA 4 rated waterproof enclosure sums from one to four load sensor signals. Its unique design allows for easy electronic isolation and troubleshooting of the weighing system. ADVANTAGE Series Load Point with C2 CalibrationANY-WEIGHScalesCOMPONENTS TO COMPLETE YOUR HARDY SYSTEM MAKESTOCKPACKSHIP