High Volume Crusher/ Perforator HV Series

HV-Perf High Volume Perforator With a processing capacity of up to 20,000 containers per hour, the REM Model HV Perf Baler feed is the full beverage destruction equipment you’ve been waiting for. Designed to fill the need for a very high volume full bever-age destruction system with the added benefit of absolutely no handling of the destroyed product by your in-plant labor. REM Inc. has produced the HV Perf Baler feed system to be a completely self contained, low RPM perforating system. This equipment will save you valuable man-hours by automating the tedious chore of manually handling your waste product. Product is loaded on the in-feed conveyor hopper to be conveyed up into the perforator-crushing unit, which is completely sealed inside a gasketed housing. The perforator-crushing unit discharges the destroyed containers into the inclined auger conveyor, which is equipped with a perforated trough to allow liquid to drain from the destroyed product prior to discharge into the baler. An operator controlled rinse system is standard to dilute residual beverage fluids inside the unit and to prevent product build-up in the system. To put REM’s model HV-Perf Baler Feed System to work for you call 1-800-745-4736 AUTOMATED INDUSTRIAL DUTY FULL BEVERAGE DESTRUCTION SYSTEM * Custom Hoppers available REM-INC. proudly introduces our second generation full beverage destruction, bulk fed, equipment for short-fills, product transition, expired product, etc.. HV-Perf Baler Feed System Features: •Galvanized interior finish •Perforator speed: 35 RPM •Perforator horsepower: 7.5 HP •Incline auger speed: 31 RPM •Incline auger horsepower: 5 HP •Sealed perforator housing •Rinse system •Inverter duty motors •Automated Lubrication system Options: •Container tipper •Automatic tipper operation •Full safety interlocked cage •Collection drain •Collection drain with pump •Full Hopper cover •Full Conveyor cover •UL/CUL listed control panel ???????REM, INC. Sales and Service Electrical safety features: •240/480 volt, three phase •Electrical components are UL listed •NEMA-4 (hose proof) enclosure •Motor overload/short circuit protection LIMITED ONE YEAR WARRANTY *All dimensions are nominal +/- 1” *Specifications subject to change without notice, without incurring responsibility to previous units sold Recycling Equipment Manufacturing, Inc. SPECIFICATIONS Max. Discharge Height 8’ Length 30’ 21/2” Width 7’ 8” Hopper load height TBD Hopper Width Variable Hopper Capacity (up to) 2 cu. yd. Shown with optional feed conveyor PO Box 310 1-800-745-4736 Priest River , Idaho www.remfg.com Office: (208) 448-4736 USA 83856 E-mail: sales@remfg.com Fax: (208) 448-1786