Hole-Drilling Machine (Automated) Brochure (PDF 198 KB)

EQUIPMENT3 Dominion Place (PO Box 6212)Queanbeyan NSW 2620AustraliaE: information@dyesol.comP: +61 2 6299 1592F: +61 2 6299 1698Please contact Dyesol for further informationwww.dyesol.comAll specifications are subject to change without notice.AUTOMATED HOLE-DRILLING MACHINEThe Automated Hole-Drilling Machine is used for creating electrolyte fill-holes in glass substrates during the initial stage of glass electrode preparation. Accurate holes are produced by application of high-pressure blasting media onto the substrate. A high efficiency vacuum filtration system is incorporated to collect airborne dust from the blasting chamber of the system. The output from this mechanism can be vented into the operating room. Larger blasting debris falls to the base of the machine and is collected in a sump.A clear window allows the user to view the progress of the blasting operation.SpECIfICATIONS • System consists of a self-contained unit with the following features:- 2 blasting nozzles- Touch-screen control panel for the programming and storage of multiple hole pattern programs• Can accommodate most common grades of grit media- Grit sizes approximately: 10 - 300 (micron)• Physical Dimensions:- Width 1560 mm x Depth 830 mm x Height 1300 mm- Weight: 350kg• Clamping mechanism for wide range of substrate sizes- Maximum size: 300 mm x 300 mm- Substrate thickness range: from 1 mm to 6 mm• Machine Requirements- Power requirement: 400 V, 3 phase,16A- Variable pressure air supply from 0 to 1000KPa