Horizontal Industrial Grinders

Wood RecyclingCompostingmodel 9564DURATECH....Clearing the way for a better tomorrow.[ hor izonta l gr inder ]The Model 9564 Horizontal Grinder is the newest member to the DuraTech Line up of industrial grinders.  It comes with the CAT C27 Tier II Diesel engine that puts out 1050 HP (782.9 kw)The HPTO wet clutch transfers power to the 64 inch wide 12,100 lb( 5488.5 kg) hammermill. The hammermill is fed by a self governing floor apron and feed roller through a 60”(152.4cm) wide x 40” (101.6cm) high  feed opening.  The high capacity 315 cu. Ft. (11.66 cu. yd.) (8.91cu.m.) hopper will handle the largest trees and stumps.Features Include:• Caterpillar C27  1050 HP (782.9 kw) Tier II diesel engine.• PT-Tech HPTO 15 microprocessor controlled wet clutch.• Enclosed engine compartment with convenient access doors• Self cleaning air intake system• 30 ft. x 48 in. wide oscillating stacking conveyor.• 10 groove belt drive connects the wet clutch to the hammermill.• 12,100 pound (5488.47kg) 64 in. wide hammermill• 24 hammers with a tip swing of 51 in.(129.54cm)• 60 in.(152.4cm) wide x 40 in. high(101.6cm) feed opening.• Self governing floor apron and feed roller (42 in.(106.68cm) diameter).• Large 315 cu. Ft.(11.66Cu. YD.)(8.91Cu M) hopper; 61.5 in. (156.2cm) wide  x 248 in. (629.9cm) long.• Four Hydraulic stabilizer legs• 91,500 pounds (41,503.7kg) of well engineered construction.FEATUREFEATUREFEATUREmodel 9564[ hor izonta l gr inder ]UP 1500 03/10Self Cleaning Air Intake SystemSelf Governing Apron and Feed Roller Feed Large HammermillOscillating Stacking Conveyor Pivots 40 DegreesFEATURE10 Groove Belt Drive SystemFEATURE 12,100 lb. (5,488.47kg) Hammermill FEATUREHPTOWet ClutchSPECIFICATIONS model 9564 [ hor izonta l gr inder ]The PLC (Programable Logic Controller) regulates feed rate based on rotor speed. Feed rate is proportional to rotor speed. Maximum feed rate is adjustable."Hammermill weight consists of shaft, hammer rods, bits, hardware and tool holders."Machine DimensionsTranport Length 53' ( 16.15m)Tranport Width 11' 10" (3.61m)Tranport Height 13' 5" (4.09m)Axle/ SuspensionSpacing 57-1/2" (146.05cm/1.46m)5th Wheel Weight 33,750lbs (15,308.74kg)Total Axle Weight 57,750lbs (26,195kg)Total Machine Weight 91,500lbs (41,503.7kg)Drive SystemEngine Caterpillar C27 Tier II 1050HP (782.9kw) Diesel EngineClutch HPTO 15 TD Wet ClutchFuel Tank 380 Gallons / 1440 LitresFuel Consumption 45.7 gal./hr (179.8 L/hr)Hydraulic Tank 145 Gallons (548.9L)Rotor Drive 10 Groove 8VFeed System Hopper Capacity 315 Cubic Feet / 11.66 Yards (8.91cu.m.)Hopper Width 61-1/2" (156.2cm)Bottom / 74" (187.7cm)TopHopper Length 248" (629.9cm)Door Up / 300"(762.0cm)Door DownHopper Depth 35" (88.9cm)Feed Opening 61-1/2" x 40" (106.6cm x156.2cm)Feed Height 96" (234.8cm)Governing SystemElectric (PLC) Programable Logic ControllerHydraulic Drives Two Load Sensing PumpsHammermillRotor Shaft Size 5-7/16" (13.81cm)Rotor Width 64" (162.6cm)Rotor Speed 1125 RPMTip Swing Diameter 50-3/4" (126.9cm)Number of Tips 24Cylinder Mid Plates 1-1/2" (3.81cm) Thick x 39" (99.06cm) DiameterCylinder End Plates 1-1/2" (3.81cm)Thick x 40"(101.6cm) Diameter T-1 MaterialWeight 12,100lbs (5488.47kg)Hammer Rod Size 3-1/4" (8.26cmn)Feed RollRotor Diameter 42" (106.9cm)Drive Dual Orbit Motor/Double Reduction GearboxesScreensScreen Area 4340 Square Inches (11023.6 sq. cm)Thickness 1" (2.54cm)Hole Sizes Available in a variety of sizesBelly ConveyorLength 28-1/2' (8.69m)Width 54" (137.2cm)Stacking ConveyorLength 366" / 30-1/2' (929.6cm/9.3m)Width 48" (121.9cm)Oscillation 40° Side to SideStacking Height 22' ( 6.71m) @ 30 Degree InclineOptionsAir Compressor AvailableMagnetic Roller AvailableMulti-Function Remote Control AvailableIllustrations, specifications, and descriptions contained herein were accurate at the time of publication, but are subject to change without notice. Illustrations may include optional equipment and accessories and may not include all standard equipment.3780 Hwy 281 SE, Jamestown, ND 58401Phone: 1-800-243-4601duratechindustries.net....Clearing the way for a better tomorrow.161-3/16" = 13' 5"409.42cm636" = 53'1615.44cm142-3/16" = 11'10"361.16cm