Hydraulic Dumpers-DD Series

The Symbol of Excellence Hydraulic Dumpers We Build Equipment the Old Fashioned Way ? ?With Pride? Mobile Parts Dumpers are used in a number of locations at this automobile component assembly facility to help the employees sort and organize parts during the manufacturing process. Printed on Recycled Paper Container Attachments Side Fork Pockets Bottom Fork Pocket Side/Top Angle Hold Down Wheel Capture Side Angles Adjustable Hold-down Bar Hydraulic Hold-down Bar ? Cart Attachment or Scoop Custom Designed and Built to Match Your Specific Cart or Container ? Custom Design Assures a Safe and Secure Fit for the Cart/Container During Tipping Operation ? Container Hold-down Systems to Capture Fork Pockets, Wheels, Side Pockets, or the Top of the Container ? Cart/Container Evaluated for a Hold-down System that Maintains a Secure Fit while Allowing for a Free Flow of Material During the Dumping Process ? Manually and Hydraulically Operated Adjustable Bar Hold-down Systems Available for Dumpers Required to Handle Multiple Cart Sizes ? Engineered Systems for Custom Dumpers or Special Attachments Including: Extending Dumper Reach Re-direct the Flow of Material Regulate the Rate of Discharge Capture an Unusual Style of Container This dumper is equipped with a hydraulic controlled lid that helps the operator regulate the flow of material into a processing system. Up To 135° Heavy Capacity Production Dumpers Overhead Clearance Floor Line Container Containers can be placed directly into the cart attachment scoop and held in place by side hold-down bars. (See the Container Attachment Page for Additional Hold-down Options.) This illustration shows an optional funneled attachment that will direct the material from the container into a hopper that is narrower than the container and below the floor level. Standard Model Rolo-1000 Rolo-2000 Rolo-4000 Rolo-6000 Rolo-8000 Lift Capacity (Lbs.) 1,000 2,000 4,000 6,000 8,000 Dump Height * <0" to 60" <0" to 84" <0 to 84" <0" to 84" <0" to 84" Cylinder(s) (Number) 2 2 2 2 2 Power Unit Range 1 HP/1.15 GPM 2 HP/1.85 GPM 2 HP/1.85 GPM 3 HP/3 GPM 3 HP/3 GPM to to to to to 5 HP/6 GPM 10 HP/10 GPM 10 HP/10 GPM 10 HP/10 GPM 10 HP/10 GPM Cycle Time Range (Sec.)** 26 to 140 20 to 160 34 to 220 34 to 137 41 to 137 Notes: * The Rolo style dumpers can be designed with a Dump Height below grade. ** Cycle Times are shown in a range due to variances in cylinder lengths and size as determined by dumping heights, and hydraulic oil flow as determined by the power unit. Design Cart Attachment: Scoop designed to fit existing or required carts. Can be equipped with a hold down bar, side hold down angles, bottom or side forks, or an adjustable hold down bar (See the Container Attachment Page for Additional Hold-down Options.) Customized for carts, containers, gaylords, boxes, baskets, totes, barrels, drums or special containers Dual cylinder power for stability and a greater lifting capacity Structural steel frame for stability and durability High tensile steel pivot shaft Heavy duty bearings Uses Empty material from a container into production, recycling or waste handling equipment: On to a conveyor Into smaller containers On to a sorting tray or table Directly into production or processing equipment Used extensively in: Automotive parts production Forging facilities Recycling operations Distribution centers Food processing Waste handling Overhead Clearance Container Dump Height Carts equipped with casters can be rolled into the cart attachment scoop and held in place by bottom forks, if the cart is equipped with fork pockets. (See the Container Attachment Page for Additional Hold-down Options.) This illustration shows a cart that is being emptied above floor level. Rolo dumpers can be designed with a dump height up to 84". Additional overhead clearance is necessary as the required dump height increases. 135° Light Capacity Dumpers Overhead Clearance Container Dump Height Small containers, like the 90 gallon model shown, can be placed directly into the cart attachment and held in place by side hold-down bars or a mechanism that catches the retaining bar on ANSI compliant containers. (See the Container Attachment Page for Additional Hold-down Options.) This illustration shows a remote mounted dumper with a scoop attachment that will direct the material from the container into an existing hopper. Standard Model LD-500 LD-1000 Lift Capacity (Lbs.) 500 1,000 Dump Height 48" to 60" 48" to 60" Cylinder(s) (Number) 1 1 Power Unit Range 1 HP/1.15 GPM 1HP/1.15 GPM to to 3 HP/3 GPM 3 HP/3 GPM Cycle Time Range (Sec.)* 32 to 84 20 to 160 Notes: * Cycle Times are shown in a range due to variances in hydraulic oil flow as determined by the power unit. Design Cart Attachment: Designed to fit existing or required carts. Can be equipped with a hold down bar, side hold down angles, bottom or side forks, an adjustable hold down bar, or a 90 gallon container catch. (See the Container Attachment Page for Additional Hold-down Options.) Customized for carts, containers, gaylords, boxes, baskets, totes, barrels, drums or special containers Single cylinder light duty lifting capacity Structural steel frame for stability and durability Heavy duty bearings Uses Empty material from a container into production, recycling or waste handling equipment: On to a conveyor Into smaller containers On to a sorting tray or table Directly into production or processing equipment Used extensively in: Waste handling Food processing Overhead Clearance Container Garbage Compactor The LD model dumper can be attached directly to the side of a garbage compactor or other material processing equipment to empty small containers, like the 90 gallon model shown, directly into the machine?s hopper. The cart is held in place by side hold-down bars or a mechanism that catches the retaining bar on ANSI compliant containers. (See the Container Attachment Page for Additional Hold-down Options.) 150° Heavy Capacity Production Dumpers Overhead Clearance Container Dump Height Carts can be rolled or containers can be placed directly into the cart attachment or scoop. (See the Container Attachment Page for Hold-down Options.) This illustration shows a remote mounted dumper with a wheeled cart held in place with side hold-down angles. Standard Model* DD-2000 DD-4000 Lift Capacity (Lbs.) 2,000 4,000 Dump Height 48" to 60" 48" to 60" Cylinder(s) (Number) 1 2 Power Unit Range 1 HP/1.15 GPM 1HP/1.15 GPM to to 3 HP/3 GPM 5 HP/6 GPM Cycle Time Range (Sec.)** 32 to 84 32 to 170 Notes: * Maximum cart size for the DD-2000 is 60? long and/or 42? wide. ** Cycle Times are shown in a range due to variances in hydraulic oil flow as determined by the power unit. Design Cart Attachment: Scoop or cart attachment designed to fit existing or required carts. Can be equipped with a hold down bar, side hold down angles, bot- tom or side forks, or an adjustable hold down bar (See the Container Attachment Page for Additional Hold-down Options.) Customized for carts, containers, gaylords, boxes, baskets, totes, barrels, drums or special containers Single or dual cylinder medium duty lifting capacity Structural steel frame for stability and durability Heavy duty bearings Uses Empty material from a container into production, recycling or waste handling equipment: On to a conveyor Into smaller containers On to a sorting tray or table Directly into production or processing equipment Used extensively in: Waste handling Recycling Industrial processing Food processing DD-2000 attached to the deck of a stationary garbage compactor emptying trainable, wheeled carts into the compaction chamber of the compactor. The carts are held in place with a bottom fork pocket attachment. 135° Extended Height Light Capacity Dumpers Overhead Clearance Dump Height Support Post Attached to Receiving Structure Container Carts can be rolled or containers can be placed directly into the cart attachment and held in place by side hold-down bars. (See the Container Attachment Page for Additional Hold- down Options.) This illustration shows an optional fun- neled attachment that will direct the material from the container into a hopper that is narrower than the container and below the floor level. Standard Model * EHD-1003-LD EHD-1005-LD Lift Capacity (Lbs.) 300 500 Dump Height 7' to 14' 7' to 14' Cylinder(s) (Number) 1 1 Power Unit Range 1 HP/1.15 GPM 1HP/1.15 GPM to to 2 HP/1.85 GPM 2 HP/1.85 GPM Cycle Time Range (Sec.)** 33 to 53 33 to 53 Notes: * The model number will change to indicate the dump height (first two numbers e.g. 09 for 9') and the lifting capacity (second two numbers e.g. 03 for 300 lbs.). ** Cycle Times are shown in a range due to variances in hydraulic oil flow as determined by the power unit and the length of the lifting cylinder. Design Cart Attachment: Scoop designed to fit existing or required carts. Can be equipped with a hold down bar or side hold down angles (See the Container Attachment Page for Additional Hold-down Options.) Customized for carts, containers, boxes, baskets, totes, small barrels or drums or special containers Single cylinder light duty lifting capacity Structural steel frame for stability and durability must be attached to a permanent structure Heavy duty bearings and chain Uses Empty material from a container into production, recycling or waste handling equipment: On to a conveyor Into a container or trailer Directly into production or processing equipment Used extensively in: Waste handling Recycling Industrial processing Food processing 135° Extended Height Heavy Capacity Dumpers Overhead Clearance Container Dump Height Larger carts can be rolled into the Heavy Capacity Extended Height Dumper scoop and held in place by side wheel capture bars. (See the Container Attachment Page for Additional Hold- down Options.) Extended height dumpers lift then tip a container to reduce the required over- head clearance needed by conventional pivot-only dumpers. Design Cart Attachment: Scoop designed to fit existing or required carts. Can be equipped with a hold down bar or side hold down angles (See the Container Attachment Page for Additional Hold-down Options.) Customized for carts, containers, boxes, baskets, totes, small barrels or drums or special containers Single cylinder heavy duty lifting capacity Structural steel frame for stability and durability - can be free-standing Heavy duty bearings and chain Uses Empty material from a container into production, recycling or waste handling equipment: On to a conveyor Into a container or trailer Directly into production or processing equipment Used extensively in: Waste handling Recycling Industrial processing Food processing Carts are loaded then weighed in a special side-load attachment before being emptied into a trailer at this food processing plant. Standard Model * EHD-1010 EHD-1020 EHD-1040 Lift Capacity (Lbs.) 1,000 2,000 4,000 Dump Height 7? to 14? 7? to 14? 7? to 14? Cylinder(s) (Number) 1 1 1 Power Unit Range 2 HP/1.85 GPM 2 HP/1.85 GPM 2 HP/1.85 GPM to to to 5 HP/6 GPM 5 HP/6 GPM 5 HP/6 GPM Cycle Time Range (Sec.)** 30 to 100 33 to 110 33 to 110 Notes: * The model number will change to indicate the dump height (first two numbers e.g. 09 for 9') and the lifting capacity (second two numbers e.g. 20 for 2,000 lbs.). ** Cycle Times are shown in a range due to variances in hydraulic oil flow as determined by the power unit and the length of the lifting cylinder. Industries Inc. Distributed By: SP INDUSTRIES, INC. Phone: 616-793-3232 2982 Jefferson Rd. Toll Free: 800-592-5959 Hopkins, MI 49328 Fax: 616-793-7451 Web: sp-industries.com E-mail: info@sp-industries.com No. Hydraulic Dumper 3/02 Custom Applications CAUTION This Equipment Should Be Operated By Properly Trained Personnel. Improper Use, Misuse or Lack of Maintenance could cause injury to people and/or property. Photos used in this brochure are illustrative only. Due to its commitment to quality SP Industries' specifications are subject to change without notice to accommodate improvements to its equipment. Information contained within this literature is intended to be the most accurate available at the time of printing. A 2000 lb. capacity Back-feed Dumper can be attached to a stationary trash compactor to empty carts from the ground at the rear of the compactor into a hopper on the compaction chamber. This 6,000 lb. capacity 180° Container Inverter is designed to lift and empty special processing vats. A 1,000 lb. capacity Extended Height Dumper is used at a galvanizing plant to transfer small parts from a 12' deep cooling tank onto a sorting conveyor. This stainless steel Rolo-6000 is designed with a custom hydraulic container latching mechanism designed for holding special containers during the dumping process.