Hydraulic Series - Metering Pumps Brochure Brochure

www.NEPTUNE1.COMMETERING PUMPSSER I ESHYDRAULICNeptune™ Chemical Pump Company is a premier manufacturer of chemical metering pumps, chemical feed systems, and chemical injection accessories. Neptune’s hydraulic diaphragm metering pumps are well-known for injecting chemicals into boilers and cooling towers, and in water and wastewater-treatment applica-tions. Major markets include power generation, oil and gas explo-ration, petrochemical, and irrigation.Other Neptune products include make-down systems to pre-pare and activate liquid or dry polymers for injection into water and wastewater-treatment processes, plus a complete line of portable mixers.Neptune Chemical Pump Company, Inc., is located in North Wales, Pennsylvania, and is a member of the Pumps Solutions Group (PSG™), part of the Dover Corporation’s Fluid Solution Platform.INDUSTRIES SERVEDNeptune provides chemical injection, chemical and metering-pump solutions for a vast array of industries requiring the accu-racy, precision and quality only Neptune can deliver. www.NEPTUNE1.COMAGRICULTUREINDUSTRIAL WATERTREATMENTMUNICIPAL WATERTREATMENTCHEMIGATIONFERTIGATIONSPORTS TURFGOLF COURSEAIR POLLUTIONCONTROLCHEMICAL FEEDCHEMICALPROCESSINGPETROCHEMICALPOWER GENBOILERTREATMENTOIL & GASPRODUCTIONMININGGAS ODORIZATIONPULP & PAPERHYDRAULICDIAPHRAGM PUMP S O L U T I O N S2MATERIAL OFCONSTRUCTIONPUMP STYLEGEAR SPEEDPISTON SIZEPUMP SERIES X X X - X - N XPISTON SIZE0 = 1/2" DIA1 = 1/2" DIA2 = 11/16" DIA3 = 1-1/16" DIA4 = 1-3/16" DIA5 = 2" DIA6 = 5/16" DIASIzINg aND SELEcTINg METERINg PUMPSIdentify the required capacity in terms of flow rate and discharge pressure. Do not oversize a metering pump. A metering pump should be sized so the maximum expected flow rate is 85% to 90% of the pump capacity. This leaves additional capacity if needed. The minimum capacity should never be less than 10% of the pump capacity to maintain accuracy.Consider materials of construction. Metering pumps are available in a variety of materials. Selection must take into consideration corrosion, erosion or solvent action. Solvent-based chemicals may dissolve plastic-headed pumps. Acids and caustics may require stainless steel or alloy liquid ends. Consider the effect of erosion when handling abrasive slurries.Is the chemical viscous or is the chemical a slurry? Does the chemi-cal release gas? Special liquid ends are available for these specific applications. Standard metering pumps handle clear liquids with viscosities ranging from water-like to 1,500 cPs. Special liquid ends can handle viscosities to 5,000 cPs and light suspensions. For true slurries or higher viscosity, tubular diaphragm heads allow pump-ing chemicals to 20,000 cPs or slurries containing up to 10% solids. Liquid ends are available which automatically vent accumulated gases.Neptune offers four materials of construction for its Hydraulic Series pumps:NOMENcLaTUREHYDRAULIC SERIES PUMP DATA SHEETMATERIAL OF CONSTRUCTION3 = 316SS Trim, Viton® O-Rings, Teflon® Diaphragm4 = C-20, Viton® O-Rings, Teflon® Diaphragm6 = PVC, Glass Ball Check, Viton® O-Rings, Teflon® Diaphragm7 = 316SS with (3) Poly Check Balls, Viton® Diaphragm (Tubular Only)8 = Kynar®, Teflon® DiaphragmPUMP STYLE A = Simplex - Non-Removable, oil head cannot be converted to Duplex D = Duplex E = Economy Head on “A” Gear BoxSE or DE = Used on Model 547 only to specify E-Head on Simplex or Duplex S = Simplex - Removable, or head can be converted to Duplex T = Tubular; Designation DT for Duplex Tubular VS = High Viscosity; Designation DVS for Duplex High ViscosityMATERIAL TEMPERATURE PRESSURE316SS 200ºF (93ºC) to 3,000 psi (207 bar)C-20 200ºF (93ºC) to 3,000 psi (207 bar)PVC 125ºF (52ºC) to 400 psi (28 bar)Kynar® 125ºF (52ºC) to 150 psi (10 bar)GEAR SPEED (Based on 1725 RPM Motor) (60Hz) (50Hz)0 = 37 SPM 0 = 30 SPM1 = 18 SPM 1 = n/a2 = 72 SPM 2 = 60 SPM5 = 117 SPM 5 = 98 SPM7 = 144 SPM 7 = 120 SPM8 = 175 SPM 8 = 144 SPMPVC and Kynar® models, 125°F (52°C) maximum.3 1 3 421 5 2 5 6Variable Oil By-pass™ stroke adjustment allows better valve perfor-mance than variable linkage designs. The valve checks have extra time to seat even in heavy liquids since they are idle during the by-pass portion of the suction and discharge strokes.HOw IT wORkSHollow piston 1 reciprocates within a cylinder. Metering rod 2 fits into the piston. Note the front of the piston, or “nose”, has a reduced diameter. The liquid seal forms at 3 where the full diameter of the piston contacts the cylinder.When the piston moves forward, oil by-passes over the reduced nose, through port 4 to the center of the piston and back to the gearbox. As the piston continues forward, port 4 is blocked by the tip of the metering rod 2 stopping the by-pass. Oil is now pushed through port 5 to the diaphragm.Vent—Refill mechanism operates once per stroke.Power train operates in oil for extended service.Turning the micrometer dial moves the metering rod and changes the pump capacity. When the metering rod is moved in, the tip of the metering rod closes port 4 sooner in the stroke allowing for less by-pass and more pumping action. Likewise, when the metering rod is moved out, the tip of the metering rod closes port 4 later in the stroke allowing more by-pass and less pumping. The motion of the piston pushes and pulls the hydraulic fluid through port 5 , into and out of the diaphragm chamber. The action of the fluid pushes and pulls the diaphragm which, in turn, pushes and pulls chemical through port 6 . The action of the check valves controls the direction of the liquid.Hydraulically balanced Teflon® diaphragm eliminates diaphragm stress associated with mechanically flexed units.Antisiphon spring provides back pressure when pumping against low pressure.EZE-CLEAN™ ValvesCartridges can be removed for cleaning without disturbing the piping to the pump.Adjustable while running through 100% of range by micrometer dial.Internal relief valve protects pump and motor.4aUTOMaTIc cONTROL & OTHER FEaTURESNeptune Hydraulic Series pumps feature a number of automatic control and other features. These features include:CE MARk-IEC MOTORS All Hydraulic Series pumps are CE-compliant and bear the CE label when coupled to a CE-marked motor. Motor options are available in IEC configurations.VARIABLE SPEED CONTROL The flow rate of any Hydraulic Series pump can be controlled automati-cally by a process instrument using a variable speed drive that changes the pump’s stroke speed.SODIUM HYPOCHLORITE GAS BLEED This is a special head that has been designed with an automatic air-release valve that allows the venting of accumulated gas produced by chemicals that off-gas, such as sodium hypochlorite.ELECTRIC STROkE CONTROL Automatically controls the flow rate of any Hydraulic Series pump by changing the stroke length either manually or through the use of a process instrument (4-20MA or 1-5V). It is a self-contained system and mounted directly on the pump.DOUBLE DIAPHRAGM wITH LEAk DETECTION For use in applications where contamination of the process fluid by the pump’s hydraulic fluid cannot be tolerated. Features two “dry” coupled diaphragms that keep the area between the diaphragms evacuated with the pumping action transmitted without the use of intermediate fluids.5481/501-LV481/501-LV SERIES (Low Volume)FEATURES• Simplex or duplex design• Double ball-check design• Variable Oil By-pass™ stroke adjustment• EZE-CLEAN™ Valves have cartridges that can be removed for cleaning without disturbing the pump’s piping• Engineered to deliver accurate flow rates at low volumes• Injection rates as low as quarts/liters per day for special applications• Handles high discharge pressures to 3,000 psi (206.9 bar)• Optional automatic control via electric stroke adjustment• Explosion-proof motors available for hazardous atmospheres• Built-in internal relief valve• Hydraulically balanced diaphragm provides extended lifeTECHNICAL DATA• Materials of construction: 316SS, C-20, PVC• Diaphragms: Teflon®• Valve Body & Seats: 316SS, C-20, PVC• Valve Checks: 316SS, Alloy 20, Glass• Standard motor: 1/3 HP-1ph-115 VAC-60c-TEFC• International motor: 0.25 kW-1 or 3ph-50 Hz-IEC—or optional custom motors available• Shipping weight: 60 lb. (27.2 kg)PERFORMANCE DATA• Capacity at 100 psi (60 Hz): 0.2 to 0.5 gph (0.8 to 2 lph); 0.4 to 1 gph (2 to 4 lph) if duplexed• Capacity at 7 bar (50 Hz): 0.16 to 0.4 gph (0.61 to 1.5 lph); 0.32 to 0.8 gph (1 to 3.0 lph) if duplexed• Maximum pressures to 3,000 psi (207 bar)• Maximum Temperatures: PVC—125ºF (52ºC); 316SS, C-20—200ºF (93ºC)• Gear speeds available at 60 Hz: 18 strokes per minuteCERTIFICATIONS & ASSOCIATIONSSERIES612-3/4"[375]2-1/2"[63]8-5/8"[220]3-7/8"[98]2-1/4"[56]2-3/4"[70]2-3/4"[70]16-1/2"[420]APPROX.14-3/4"[375]APPROX.21-1/4"[540] MAX.10" MAX[254]SUCTION1/2" NPTDISCHARGE1/2" NPTELECTRIC STROKE CONTROL (OPTIONAL)1-1/4"[32]5-3/8"[137]4-1/2"[114]3-7/8"[98] TYP.2-1/4"[56] TYP.2-3/4"[70]2-3/4"[70]6"[152]6"[152]12-3/4"[375]2-1/2"[63]8-5/8"[220]3-7/8"[98]2-1/4"[56]2-3/4"[70]2-3/4"[70]16-1/2"[420]APPROX.14-3/4"[375]APPROX.21-1/4"[540] MAX.10" MAX[254]SUCTION1/2" NPTDISCHARGE1/2" NPTELECTRIC STROKE CONTROL (OPTIONAL)1-1/4"[32]5-3/8"[137]4-1/2"[114]3-7/8"[98] TYP.2-1/4"[56] TYP.2-3/4"[70]2-3/4"[70]6"[152]6"[152]DUPLEXSTANDARD MOTOR FLANGE MOUNT MOTORwITH METaL HEaDTeflon® is a registered trademark of E.I. du Pont de Nemeurs and CompanyHastelloy® C is a registered trademark of Haynes InternationalNote: PVC head pumps satisfactory for temperatures to 125ºF (52ºC).Note: Special materials available for services not compatible with glass.481/501-LV SERIES (Low Volume) SELEcTION cHaRT481/501-LV SERIES (Low Volume) “DIa-PUMP” DIMENSIONS 481/501-LVSERIESMaterials of ConstructionStandardMotorCapacity at 1000 psi (60 Hz) Capacity at 70 bar (50 Hz) Max Pressure of the Series Strokes/Minute MaxTemp Weightgph lph gph lph psi bar 60 Hz 50 Hz°F °C Lbs KgMin Max Min Max Min Max Min Max Min Max Min Max Min Max Min Max481501Simplex316SS 1/3 HP 0.2 0.5 0.8 1.9Not Applicable in 50 Hz50 1,500 3.4 103.4 18.0 18.0Not Applicable in 50 Hz200 93 60 27C-20 1/3 HP 0.5 0.5 1.9 1.9 50 1,500 3.4 103.4 18.0 18.0 200 93 60 27PVC 1/3 HP 0.5 0.5 1.9 1.9 50 150 3.4 10.3 18.0 18.0 125 52 60 27Duplex316SS 1/3 HP 0.4 1.0 1.5 3.8Not Applicable in 50 Hz50 900 3.4 62.1 18.0 18.0Not Applicable in 50 Hz200 93 85 39C-20 1/3 HP 1.0 1.0 3.8 3.8 50 900 3.4 62.1 18.0 18.0 200 93 85 39PVC 1/3 HP 1.0 1.0 3.8 3.8 50 400 3.4 27.6 18.0 18.0 125 52 85 39Hydraulically actuated "diapHragm pumps"7500-SSERIES500-S SERIESFEATURES• Simplex or duplex design• Engineered for fluids with viscosities to 1,500 cPs*• Double ball-check design• Variable Oil By-pass™ stroke adjustment• EZE-CLEAN™ Valves have cartridges that can be removed for cleaning without disturbing the pump’s piping• Ten-turn micrometer dial calibrated to 1% increments• Color-contrasted dial protected from corrosion by clear PVC covering• Stroke mechanism moves only when adjusted, eliminating wear• Piston powered through complete stroke length at all capacities, eliminating stress, wear and shock• Optional automatic control via electric stroke adjustment and variable speed drives• Built-in internal relief valve• Hydraulically balanced diaphragm provides extended life*Pumps operating at 144 strokes per minute for use with water-like chemicals only.TECHNICAL DATA• Materials of construction: 316SS, C-20, PVC• Diaphragms: Teflon® • Valve Body & Seats: 316SS, C-20, PVC • Valve Checks: 316SS, C-20, Glass• Standard motor: 1/3 HP-1ph-115 VAC-60c-TEFC• International motor: 0.25 kW-1 or 3ph-50 Hz-IEC—or optional custom motors available• Shipping weight: 70 pounds/31.8 kg (with standard motor; add 20 pounds for flange-mounted motor and 15 pounds if duplexed)PERFORMANCE DATA• Capacity at 100 psi (60 Hz): 1 to 30 gph (4 to 114 lph); 2 to 60 gph (8 to 227 lph) if duplexed• Capacity at 7 bar (50 Hz): 0.8 to 25 gph (3 to 95 lph); 1.6 to 50 gph (6 to 189 lph) if duplexed• Maximum pressure to 3,000 psi (207 bar)• Maximum Temperatures: PVC—125ºF (52ºC); 316SS, C-20—200ºF (93ºC)• Gear speeds available at 60 Hz: 37, 72, 117 and 144 strokes per minute• Gear speeds available at 50 Hz: 30, 60, 98, and 120 strokes per minuteCERTIFICATIONS & ASSOCIATIONS8STANDARD MOTOR*Dimensions are approximate. Specifications subject to change without notice.12-3/4"[375]2-1/2"[63]8-5/8"[220]3-7/8"[98]2-1/4"[56]2-3/4"[70]2-3/4"[70]16-1/2"[420]APPROX.14-3/4"[375]APPROX.21-1/4"[540] MAX.10" MAX[254]SUCTION1/2" NPTDISCHARGE1/2" NPTELECTRIC STROKE CONTROL (OPTIONAL)1-1/4"[32]5-3/8"[137]4-1/2"[114]3-7/8"[98] TYP.2-1/4"[56] TYP.2-3/4"[70]2-3/4"[70]6"[152]6"[152]FLANGE MOUNT MOTORSTANDARD MOTOR12-3/4"[375]APPROX.3-5/8"[92]8-5/8"[220]4-5/8"[117]1-7/8"[48]2-3/4"[70]2-3/4"[70]16-1/2"[420]APPROX.14-3/4"[375]APPROX.21-1/4"[540] MAX.10" MAX[254]SUCTION1/2" NPTDISCHARGE1/2" NPTELECTRIC STROKE CONTROL (OPTIONAL)1-1/4"[32]5-3/8"[137]4-1/2"[114]4-5/8"[117] TYP.1-7/8"[48] TYP.2-3/4"[70]2-3/4"[70]7-1/8"[181]7-1/8"[181]12-3/4"[375]APPROX.3-5/8"[92]8-5/8"[220]4-5/8"[117]1-7/8"[48]2-3/4"[70]2-3/4"[70]16-1/2"[420]APPROX.14-3/4"[375]APPROX.21-1/4"[540] MAX.10" MAX[254]SUCTION1/2" NPTDISCHARGE1/2" NPTELECTRIC STROKE CONTROL (OPTIONAL)1-1/4"[32]5-3/8"[137]4-1/2"[114]4-5/8"[117] TYP.1-7/8"[48] TYP.2-3/4"[70]2-3/4"[70]7-1/8"[181]7-1/8"[181]FLANGE MOUNT MOTORwITH PVc HEaDwITH METaL HEaDTeflon® is a registered trademark of E.I. du Pont de Nemeurs and CompanyKynar® is a registered trademark of Arkema Inc.Note: PVC head pumps satisfactory for temperatures to 125ºF (52ºC).Note: Special materials available for services not compatible with glass.**For metallic heads only.Materials of ConstructionStandardMotorCapacity at 1000 psi (60 Hz) Capacity at 70 bar (50 Hz) Max Pressure of the Series Strokes/Minute MaxTemp Weightgph lph gph lph psi bar 60 Hz 50 Hz°F °C Lbs KgMin Max Min Max Min Max Min Max Min Max Min Max Min Max Min MaxS316SS 1/3 HP 1.0 30.0 3.8 114.0 0.8 24.9 3.2 94.6 50 1,500 3.4 103.4 37.0 144.0 30.7 119.5 200 93 70 32C-20 1/3 HP 1.0 30.0 3.8 114.0 0.8 24.9 3.2 94.6 50 1,500 3.4 103.4 37.0 144.0 30.7 119.5 200 93 70 32PVC 1/3 HP 1.0 30.0 3.8 114.0 0.8 24.9 3.2 94.6 50 400 3.4 27.6 37.0 144.0 30.7 119.5 125 52 70 32Kynar® 1/3 HP 1.0 30.0 3.8 114.0 0.8 24.9 3.2 94.6 50 150 3.4 10.3 37.0 144.0 30.7 119.5 125 52 70 32Optional Motor** 1/2 HP 1.0 30.0 3.8 114.0 0.8 24.9 3.2 94.6 50 3,000 3.4 206.9 37.0 144.0 30.7 119.52 200 93 70 32500-S SERIES SELEcTION cHaRT500-S SERIES “DIa-PUMP” DIMENSIONS 500-SSERIESHydraulically actuated "diapHragm pumps"9500-DSERIES500-D SERIESFEATURES• Duplex design• Engineered for fluids with viscosities to 1,500 cPs*• Double ball-check design• Variable Oil By-pass™ stroke adjustment• EZE-CLEAN™ Valves have cartridges that can be removed for cleaning without disturbing the pump’s piping• Ten-turn micrometer dial calibrated to 1% increments• Color-contrasted dial protected from corrosion by clear PVC covering• Stroke mechanism moves only when adjusted, eliminating wear• Piston powered through complete stroke length at all capacities, eliminating stress, wear and shock• Optional automatic control via electric stroke adjustment and variable speed drives• Built-in internal relief valve• Hydraulically balanced diaphragm provides extended life*Pumps operating at 144 strokes per minute for use with water-like chemicals only.TECHNICAL DATA• Materials of construction: 316SS, C-20, PVC• Diaphragms: Teflon® • Valve Body & Seats: 316SS, C-20, PVC• Valve Checks: 316SS, C-20, Glass• Standard motor: 1/3 HP-1ph-115 VAC-60c-TEFC• International motor: 0.25 kW-1 or 3ph-50 Hz-IEC—or optional custom motors available• Shipping weight: 85 pounds (38.6 kg)PERFORMANCE DATA• Capacity at 100 psi (60 Hz): 1 to 60 gph (4 to 228 lph)• Capacity at 7 bar (50 Hz): 0.8 to 50 gph (3 to 189 lph)• Maximum pressures to 3,000 psi or 207 bar• Maximum Temperature: PVC—125F (52ºC); 316SS, C-20—200ºF (93ºC)• Gear speeds available at 60 Hz: 37, 72, 177 and 144 strokes per minute• Gear speeds available at 50 Hz: 30, 60, 98 and 120 strokes per minuteCERTIFICATIONS & ASSOCIATIONS1021-1/4"[540] MAX.ELECTRICSTROKE CONTROL(OPTIONAL)SUCTION1/2" NPT5-3/8"[137]10" MAX.[254]DISCHARGE1/2" NPT4-1/2"[114]1-1/4"[32]2-3/4"[70]2-3/4"[70]2-1/4"[56]3-7/8"[98]8-5/8"[220]2-1/2"[63]14-3/4"[375]3-7/8"[98] TYP.2-1/4"[56] TYP.2-3/4"[70]2-3/4"[70]6"[152]6"[152]16-1/2"[420]APPROX.14-3/4"[375]APPROX.ELECTRICSTROKE CONTROL(OPTIONAL)SUCTION1/2" NPT5-3/8"[137]4-1/2"[114]1-1/4"[32]14-3/4"[375]APPROX.10" MAX[254]DISCHARGE1/2" NPT21-1/4"[540] MAX.16-1/2"[420]APPROX.3-5/8"[92]8-5/8"[220]4-5/8"[117]1-7/8"[48]2-3/4"[70]2-3/4"[70]14-3/4"[375]APPROX.4-5/8"[117] TYP.7-1/8"[181]7-1/8"[181]1-7/8" [48]TYP.2-3/4"[70]2-3/4"[70]21-1/4"[540] MAX.ELECTRICSTROKE CONTROL(OPTIONAL)SUCTION1/2" NPT5-3/8"[137]10" MAX.[254]DISCHARGE1/2" NPT4-1/2"[114]1-1/4"[32]2-3/4"[70]2-3/4"[70]2-1/4"[56]3-7/8"[98]8-5/8"[220]2-1/2"[63]14-3/4"[375]3-7/8"[98] TYP.2-1/4"[56] TYP.2-3/4"[70]2-3/4"[70]6"[152]6"[152]16-1/2"[420]APPROX.14-3/4"[375]APPROX.ELECTRICSTROKE CONTROL(OPTIONAL)SUCTION1/2" NPT5-3/8"[137]4-1/2"[114]1-1/4"[32]14-3/4"[375]APPROX.10" MAX[254]DISCHARGE1/2" NPT21-1/4"[540] MAX.16-1/2"[420]APPROX.3-5/8"[92]8-5/8"[220]4-5/8"[117]1-7/8"[48]2-3/4"[70]2-3/4"[70]14-3/4"[375]APPROX.4-5/8"[117] TYP.7-1/8"[181]7-1/8"[181]1-7/8" [48]TYP.2-3/4"[70]2-3/4"[70]STANDARD MOTOR*Dimensions are approximate. Specifications subject to change without notice.DUPLEXSTANDARD MOTOR DUPLEXwITH PVc HEaDwITH METaL HEaDTeflon® is a registered trademark of E.I. du Pont de Nemeurs and CompanyKynar® is a registered trademark of Arkema Inc.Note: PVC head pumps satisfactory for temperatures to 125ºF (52ºC).Note: Special materials available for services not compatible with glass.**For metallic heads only.500-D SERIES SELEcTION cHaRT500-D SERIES “DIa-PUMP” DIMENSIONS 500-DSERIESMaterials of ConstructionStandardMotorCapacity at 1000 psi (60 Hz) Capacity at 70 bar (50 Hz) Max Pressure of the Series Strokes/Minute MaxTemp Weightgph lph gph lph psi bar 60 Hz 50 Hz°F °C Lbs KgMin Max Min Max Min Max Min Max Min Max Min Max Min Max Min MaxD316SS 1/3 HP 1.0 60.0 3.8 228.0 0.8 49.8 3.2 189.2 50 3,000 3.4 206.9 37.0 117.0 30.7 97.1 200 93 85 39C-20 1/3 HP 1.0 60.0 3.8 228.0 0.8 49.8 3.2 189.2 50 3,000 3.4 206.9 37.0 117.0 30.7 97.1 125 52 85 39PVC 1/3 HP 1.0 60.0 3.8 228.0 0.8 49.8 3.2 189.2 50 400 3.4 27.6 37.0 117.0 30.7 97.1 125 52 85 39Kynar® 1/3 HP 1.0 60.0 3.8 228.0 0.8 49.8 3.2 189.2 50 150 3.4 10.3 37.0 117.0 30.7 97.1 125 52 85 39Optional Motor** 1/2 HP 1.0 30.0 3.8 114.0 0.8 24.9 3.2 94.6 50 3,000 3.4 206.9 37.0 144.0 30.7 119.52 200 93 70 32Hydraulically actuated "diapHragm pumps"11500-ASERIES500-a SERIESFEATURES• Simplex pump• Engineered for fluids with viscosities to 1,500 cPs• Double ball-check design• Variable Oil By-pass™ stroke adjustment• EZE-CLEAN™ Valves have cartridges that can be removed for cleaning without disturbing the pump’s piping• Ten-turn micrometer dial calibrated to 1% increments• Color-contrasted dial protected from corrosion by clear PVC covering• Stroke mechanism moves only when adjusted, eliminating wear• Piston powered through complete stroke length at all capacities, eliminating stress, wear and shock• Optional automatic control via electric stroke adjustment and variable speed drives• Built-in internal relief valve• Hydraulically balanced diaphragm provides extended lifeTECHNICAL DATA• Materials of construction: 316SS, C-20, PVC• Diaphragms: Teflon® • Valve Body & Seats: 316SS, C-20, PVC• Valve Checks: 316SS, C-20, Glass• Standard motor: 1/3 HP-1ph-115 VAC-60c-TEFC• International motor: 0.25 kW-1 or 3ph-50 Hz-IEC—or optional custom motors available• Shipping weight: 60 pounds (27.2 kg)PERFORMANCE DATA• Capacity at 100 psi (60 Hz): 1 to 18 gph (4 to 68 lph)• Capacity at 7 bar (50 Hz): 0.8 to 15 gph (3 to 57 lph)• Maximum pressures to 1,100 psi (76 bar)• Maximum Temperatures: PVC—125ºF (52ºC); 316SS, C-20—200ºF (93ºC)• Gear speeds available at 60 Hz: 37, 72 and 117 strokes per minute• Gear speeds available at 50 Hz: 30, 60 and 98 strokes per minuteCERTIFICATIONS & ASSOCIATIONS12STANDARD MOTOR*Dimensions are approximate. Specifications subject to change without notice.See Bulletin DP-500E for Kynar® (N8)FLANGE MOUNT MOTORwITH PVc HEaD (N5)wITH METaL HEaDTeflon® is a registered trademark of E.I. du Pont de Nemeurs and CompanyKynar® is a registered trademark of Arkema Inc.Note: PVC head pumps satisfactory for temperatures to 125ºF (52ºC).Note: Special materials available for services not compatible with glass.500-a SERIES SELEcTION cHaRT500-a SERIES “DIa-PUMP” DIMENSIONS EXcEPT kyNaR® MODELS (cODE N8)* 500-ASERIESMaterials of ConstructionStandardMotorCapacity at 1000 psi (60 Hz) Capacity at 70 bar (50 Hz) Max Pressure of the Series Strokes/Minute MaxTemp Weightgph lph gph lph psi bar 60 Hz 50 Hz°F °C Lbs KgMin Max Min Max Min Max Min Max Min Max Min Max Min Max Min Maxa316SS 1/3 HP 1.0 18.0 3.8 68.4 0.8 14.9 3.2 56.8 50 1,100 3.4 75.9 37.0 117.0 30.7 97.1 200 93 60 27C-20 1/3 HP 1.0 18.0 3.8 68.4 0.8 14.9 3.2 56.8 50 1,100 3.4 75.9 37.0 117.0 30.7 97.1 200 93 60 27PVC 1/3 HP 1.0 18.0 3.8 68.4 0.8 14.9 3.2 56.8 50 400 3.4 27.6 37.0 117.0 30.7 97.1 125 52 60 27Hydraulically actuated "diapHragm pumps"13500-ESERIES500-E SERIESFEATURES• Economy pump head with single ball-check design• Engineered for fluids with viscosities to 1,500 cPs • Cost-efficient alternative to packed-plunger pumps• Variable Oil By-pass™ stroke adjustment• Ten-turn micrometer dial calibrated to 1% increments• Color-contrasted dial protected from corrosion by clear PVC covering• Stroke mechanism moves only when adjusted, eliminating wear• Piston powered through complete stroke length at all capacities, eliminating stress, wear and shock• Optional automatic control via electric stroke adjustment and variable speed drives• Built in internal relief valve• Hydraulically balanced diaphragm provides extended lifeTECHNICAL DATA• Materials of construction: 316SS, PVC, Kynar®• Diaphragms: Teflon® • Valve Body & Seats: 316SS, PVC, Kynar® • Valve Checks: 316SS, Glass, Ceramic• Standard motor: 1/3 HP-1ph-115 VAC-60c-TEFC• International motor: 0.25 kW-1 or 3ph-50 Hz-IEC—or optional custom motors available• Shipping weight: 59 to 65 pounds (26.8 to 29.5 kg); 85 pounds (38.6 kg) if duplexedPERFORMANCE DATA• Capacity at 100 psi (60 Hz): 0.8 to 30 gph (3 to 113 lph)• Capacity at 7 bar (50 Hz): 0.7 to 15 gph (3 to 57 lph)• Maximum pressures to 1,100 psi (76 bar)• Maximum Temperatures: PVC, Kynar®—125ºF (52ºC); 316SS—200ºF (93ºC)• Gear speeds available at 60 Hz: 37, 72, 117 and 144 strokes per minute• Gear speeds available at 50 Hz: 30, 60, 98 and 120 strokes per minuteCERTIFICATIONS & ASSOCIATIONS14(2) REARMOUNTINGHOLES(2) REARMOUNTINGHOLES(3) 3/8" DIA.MOUNTINGHOLES3/8" NPTSUCTIONCONNECTION1/2" NPTSUCTIONCONNECTION3/8" NPTDISCHARGECONNECTION1/2" NPTDISCHARGECONNECTION10"MAX.STANDARDMOTOR15-1/2"HEIGHTINCREASES TOAPPROX. 20"FOR MOTOROPTIONSREQUIRINGFLANGEADAPTOR.7/8" 7/8"1-3/4" 1-3/4"1-5/16"1-7/16"3/4"1-5/16"2-3/4"3-5/8"7-3/8"2-1/2"5-3/8"500-E-N3 (316SS) MODELS500-E-N5 (PVC) MODELS500-E-N8 (kYNAR) MODELSN3 HEAD ASSEMBLY N5 AND N8 HEAD ASSEMBLYHEaD aSSEMbLIESTeflon® is a registered trademark of E.I. du Pont de Nemeurs and CompanyKynar® is a registered trademark of Arkema Inc.Note: PVC head pumps satisfactory for temperatures to 125ºF (52ºC).Note: Special materials available for services not compatible with glass.500-E SERIES SELEcTION cHaRT500-E SERIES “DIa-PUMP” DIMENSIONS 500-ESERIESMaterials of ConstructionStandardMotorCapacity at 1000 psi (60 Hz) Capacity at 70 bar (50 Hz) Max Pressure of the Series Strokes/Minute MaxTemp Weightgph lph gph lph psi bar 60 Hz 50 Hz°F °C Lbs KgMin Max Min Max Min Max Min Max Min Max Min Max Min Max Min MaxE316SS 1/3 HP 0.8 18.0 3.0 68.4 0.7 14.9 2.5 56.8 50 1,100 3.4 75.9 37.0 117.0 30.7 97.1 200 93 59 27PVC 1/3 HP 0.8 18.0 3.0 68.4 0.7 14.9 2.5 56.8 50 150 3.4 10.3 37.0 117.0 30.7 97.1 200 93 59 27Kynar® 1/3 HP 0.8 18.0 3.0 68.4 0.7 14.9 2.5 56.8 50 150 3.4 10.3 37.0 117.0 30.7 97.1 125 52 60 27Hydraulically actuated "diapHragm pumps"15500-VSSERIES500-VS SERIESFEATURES• Accurately handle viscous fluids, such as polymers, up to 5,000 cPs• Simplex or duplex models available• Variable Oil By-pass™ stroke adjustment• Standard flat diaphragm• Large internal porting• Single-ball suction check valve• Optional automatic control via electric stroke adjustment and variable speed drives• Built-in internal relief valve• Hydraulically balanced diaphragm provides extended lifeTECHNICAL DATA• Materials of construction: 316SS• Diaphragms: Teflon® • Valve Body & Seats: 316SS• Valve Checks: 316SS• Standard motor: 1/3 HP-1ph-115 VAC-60c-TEFC• International motor: 0.25 kW-1 or 3ph-50 Hz-IEC—or optional custom motors available• Shipping weight: 70 pounds (31.6 kg)PERFORMANCE DATA• Capacity at 100 psi (60 Hz): 2 to 30 gph (8 to 114 lph); 4 to 60 gph (15 to 226 lph) if duplexed• Capacity at 7 bar (50 Hz): 1.7 to 25 gph (6 to 95 lph); 3.4 to 50 gph (13 to 189 lph) if duplexed• Maximum pressures to 700 psi (48 bar)• Maximum Temperature: 200ºF (93ºC)• Gear speeds available at 60 Hz: 37, 72, 117 and 144 strokes per minute• Gear speeds available at 50 Hz: 30, 60, 98 and 120 strokes per minuteCERTIFICATIONS & ASSOCIATIONS1624"APPROX.2-1/4"10-1/8"3-1/2"1-1/4"3/8" X 5/8" SLOT(REAR)DISCHARGE1/2" NPTSUCTION3/4" NPT4-5/8" 6-1/8"19-1/2"APPROX.9-1/8"5-3/8"(2) 3/8" DIA. HOLES(REAR)1/2"2-3/4" 2-3/4"24"APPROX.2-1/4"10-1/8"3-1/2"1-1/4"3/8" X 5/8" SLOT(REAR)DISCHARGE1/2" NPTSUCTION3/4" NPT4-5/8" 6-1/8"19-1/2"APPROX.9-1/8"5-3/8"(2) 3/8" DIA. HOLES(REAR)1/2"2-3/4" 2-3/4"STANDARD MOTOR FLANGE MOUNT MOTORwITH METaL HEaD500-VS SERIES SELEcTION cHaRT500-VS SERIES “DIa-PUMP” DIMENSIONS 500-VSSERIESMaterials of ConstructionStandardMotorCapacity at 1000 psi (60 Hz) Capacity at 70 bar (50 Hz) Max Pressure of the Series Strokes/Minute MaxTemp Weightgph lph gph lph psi bar 60 Hz 50 Hz°F °C Lbs KgMin Max Min Max Min Max Min Max Min Max Min Max Min Max Min MaxVS 316SS 1/3 HP 2.0 30.0 7.6 114.0 1.7 24.9 6.3 94.6 50 900 3.4 62.1 37.0 144.0 30.7 119.5 200 93 70 32Hydraulically actuated "diapHragm pumps"17500-TSERIES500-T SERIESFEATURES• Engineered for viscous fluids up to 20,000 cPs• Simplex or duplex design• Can handle medium slurries with up to 10% solids• Double ball-check design• Variable Oil By-pass™ stroke adjustment• Straight-through flow pattern eliminates pockets where slurries can settle• Standard double diaphragm• Standard double-ball suction and discharge valves; single-ball valve optional• Elastomer tube shape and memory reduce NPSH requirements• Spring-loaded discharge does not require external back pressure valve• Optional automatic control via electric stroke adjustment and variable speed drives• Built-in internal reliefTECHNICAL DATA• Materials of construction: 316SS• Diaphragms: Viton® • Valve Body & Seats: 316SS• Valve Checks: 316SS or polyurethane• Standard motor: 1/3 HP-1ph-115 VAC-60c-TEFC• International motor: 0.25 kW-1 or 3ph-50 Hz-IEC—or optional custom motors available• Shipping weight: 80 to 95 pounds (36.2 to 43.1 kg)PERFORMANCE DATA• Capacity at 100 psi (60 Hz): 2 to 80 gph (8 to 303 lph)• Capacity at 7 bar (50 Hz): 1.7 to 25 gph (6 to 95 lph)• Maximum pressures to 300 psi (21 bar)• Maximum Temperature: 200ºF (93ºC)• Gear speeds available at 60 Hz: 37, 72, 117 and 144 strokes per minute• Gear speeds available at 50 Hz: 30, 60, 98 and 120 strokes per minuteCERTIFICATIONS & ASSOCIATIONS18ELECTRIC STROKECONTROL21"[535] 10-1/4"[260]MAX.14-3/4"[375]APPROX.16-1/2"[375]APPROX.3-1/8"[79]3/4" NPTDISCHARGE3/4" NPTSUCTION3/4" NPTDISCHARGE3-7/8" NPT[99]20"[508]APPROX.3/4" NPTSUCTION2-3/4"[70](TYP.)2-3/4"[70](TYP.) BA AC(3) 3/8" DIA.MOUNTING HOLES4-1/2"[114]5-3/8"[137]1-1/4"[32]ELECTRIC STROKECONTROL21"[535] 10-1/4"[260]MAX.14-3/4"[375]APPROX.16-1/2"[375]APPROX.3-1/8"[79]3/4" NPTDISCHARGE3/4" NPTSUCTION3/4" NPTDISCHARGE3-7/8" NPT[99]20"[508]APPROX.3/4" NPTSUCTION2-3/4"[70](TYP.)2-3/4"[70](TYP.) BA AC(3) 3/8" DIA.MOUNTING HOLES4-1/2"[114]5-3/8"[137]1-1/4"[32]ELECTRIC STROKECONTROL21"[535] 10-1/4"[260]MAX.14-3/4"[375]APPROX.16-1/2"[375]APPROX.3-1/8"[79]3/4" NPTDISCHARGE3/4" NPTSUCTION3/4" NPTDISCHARGE3-7/8" NPT[99]20"[508]APPROX.3/4" NPTSUCTION2-3/4"[70](TYP.)2-3/4"[70](TYP.) BA AC(3) 3/8" DIA.MOUNTING HOLES4-1/2"[114]5-3/8"[137]1-1/4"[32]560 SERIES MODELS wITH FLANGE ADAPTORSTANDARD MOTOR ALL MODELS500-a SERIES SELEcTION cHaRT500-T SERIES “DIa-PUMP” DIMENSIONS 500-TSERIES500 SERIES MODELS wITH "FALP"Materials of ConstructionStandardMotorCapacity at 1000 psi (60 Hz) Capacity at 70 bar (50 Hz) Max Pressure of the Series Strokes/Minute MaxTemp Weightgph lph gph lph psi bar 60 Hz 50 Hz°F °C Lbs KgMin Max Min Max Min Max Min Max Min Max Min Max Min Max Min MaxT 316SS 1/3 HP 2.0 30.0 7.6 114.0 1.7 24.9 6.3 94.6 50 300 3.4 20.7 37.0 144.0 30.7 119.5 200 93 80 36Optional Motor 1/2 HP 40.0 80.0 152.0 304.0 33.2 66.4 126.2 252.3 50 175 3.4 12.1 72.0 144.0 59.8 119.5 200 93 80 36Hydraulically actuated "diapHragm pumps"19560-SSERIES560-S SERIESFEATURES• Simplex or duplex design• Variable Oil By-pass™ stroke adjustment• EZE-CLEAN™ Valves have cartridges that can be removed for cleaning without disturbing the pump’s piping (available only on 316SS or C-20 models)• Ten-turn micrometer dial calibrated to 1% increments• Color-contrasted dial protected from corrosion by clear PVC covering• Stroke mechanism moves only when adjusted, eliminating wear• Piston powered through complete stroke length at all capacities, eliminating stress, wear and shock• Optional automatic control via electric stroke adjustment and variable speed drives• Built-in internal relief valve• Hydraulically balanced diaphragm provides extended lifeTECHNICAL DATA• Materials of construction: 316SS, C-20, PVC, Kynar®• Diaphragms: Teflon® • Valve Body & Seats: 316SS, C-20, PVC, Kynar®• Valve Checks: 316SS, C-20, Glass• Standard motor: 1/2 HP-1ph-115 VAC-60c-TEFC• International motor: 0.25 kW-1 or 3ph-50 Hz-IEC—or optional custom motors available• Shipping weight: 85 pounds/31.8 kg (with standard motor; add 20 pounds for flange-mounted motor)PERFORMANCE DATA• Capacity at 100 psi (60 Hz): 40 to 80 gph (152 to 304 lph); 80 to 160 gph (304 to 608 lph) if duplexed• Capacity at 7 bar (50 Hz): 33.2 to 66 gph (126 to 252 lph); 66 to 133 gph (252 to 505 lph) if duplexed• Maximum pressures to 350 psi (24 bar)• Maximum Temperatures: PVC, Kynar®—125ºF (52ºC); 316SS, C-20—200ºF (93ºC)• Gear speeds available at 60 Hz: 37, 72, 117 and 144 strokes per minute• Gear speeds available at 50 Hz: 30, 60, 98 and 120 strokes per minuteCERTIFICATIONS & ASSOCIATIONS20*Dimensions are approximate. Specifications subject to change without notice.BOLT HOLE LOCATIONS21-3/4"[553] MAX.10-1/4" MAX.[260]DISCHARGE1/2" NPTELECTRICSTROKE CONTROL(OPTIONAL)SUCTION3/4" NPT 5-3/8"[137]4-1/2"[114]1-1/4"[32]14-3/4"[375]APPROX.16-1/2"[420]APPROX.2-3/4"[70]2-3/4"[70]2-1/4"[57]5-1/4"[133]3-5/8"[93]4-1/2"[114]5-3/4"[146]18-3/4"[477]APPROX.1-5/8"[42]9-3/4"[248]SUCTION1-1/4" NPT2-3/8"[60](1) 3/8" X 5/8"SLOT (FRONT)(2) 3/8" DIA.HOLES (REAR)3-1/2"[89]2-3/4"[70]3-1/2"[89]2-3/4"[70]1/4"[6]1/2"[13]DISCHARGE1-1/4" NPT2-3/4"[70]2-3/4"[70](3) 3/8" [9] DIA.MOUNTING HOLESMOTOR CENTER8-5/8"[220]STANDARD MOTOR FLANGE MOUNT MOTORwITH PVc HEaDwITH METaL HEaDTeflon® is a registered trademark of E.I. du Pont de Nemeurs and CompanyKynar® is a registered trademark of Arkema Inc.560-S SERIES SELEcTION cHaRT560-S SERIES “DIa-PUMP” DIMENSIONS 560-SSERIESBOLT HOLE LOCATIONS21-3/4"[553] MAX.10-1/4" MAX.[260]DISCHARGE1/2" NPTELECTRICSTROKE CONTROL(OPTIONAL)SUCTION3/4" NPT 5-3/8"[137]4-1/2"[114]1-1/4"[32]14-3/4"[375]APPROX.16-1/2"[420]APPROX.2-3/4"[70]2-3/4"[70]2-1/4"[57]5-1/4"[133]3-5/8"[93]4-1/2"[114]5-3/4"[146]18-3/4"[477]APPROX.1-5/8"[42]9-3/4"[248]SUCTION1-1/4" NPT2-3/8"[60](1) 3/8" X 5/8"SLOT (FRONT)(2) 3/8" DIA.HOLES (REAR)3-1/2"[89]2-3/4"[70]3-1/2"[89]2-3/4"[70]1/4"[6]1/2"[13]DISCHARGE1-1/4" NPT2-3/4"[70]2-3/4"[70](3) 3/8" [9] DIA.MOUNTING HOLESMOTOR CENTER8-5/8"[220]BOLT HOLE LOCATIONS21-3/4"[553] MAX.10-1/4" MAX.[260]DISCHARGE1/2" NPTELECTRICSTROKE CONTROL(OPTIONAL)SUCTION3/4" NPT 5-3/8"[137]4-1/2"[114]1-1/4"[32]14-3/4"[375]APPROX.16-1/2"[420]APPROX.2-3/4"[70]2-3/4"[70]2-1/4"[57]5-1/4"[133]3-5/8"[93]4-1/2"[114]5-3/4"[146]18-3/4"[477]APPROX.1-5/8"[42]9-3/4"[248]SUCTION1-1/4" NPT2-3/8"[60](1) 3/8" X 5/8"SLOT (FRONT)(2) 3/8" DIA.HOLES (REAR)3-1/2"[89]2-3/4"[70]3-1/2"[89]2-3/4"[70]1/4"[6]1/2"[13]DISCHARGE1-1/4" NPT2-3/4"[70]2-3/4"[70](3) 3/8" [9] DIA.MOUNTING HOLESMOTOR CENTER8-5/8"[220]Materials of ConstructionStandardMotorCapacity at 1000 psi (60 Hz) Capacity at 70 bar (50 Hz) Max Pressure of the Series Strokes/Minute MaxTemp Weightgph lph gph lph psi bar 60 Hz 50 Hz°F °C Lbs KgMin Max Min Max Min Max Min Max Min Max Min Max Min Max Min Max560Simplex316SS 1/3 HP 40.0 80.0 152.0 304.0 33.2 66.4 126.2 252.3 50 350 3.4 24.1 72.0 144.0 59.8 119.5 200 93 85 39C-20 1/3 HP 40.0 80.0 152.0 304.0 33.2 66.4 126.2 252.3 50 350 3.4 24.1 72.0 144.0 59.8 119.5 200 93 85 39PVC 1/3 HP 40.0 80.0 152.0 304.0 33.2 66.4 126.2 252.3 50 150 3.4 10.3 72.0 144.0 59.8 119.5 125 52 85 39Kynar® 1/3 HP 40.0 80.0 152.0 304.0 33.2 66.4 126.2 252.3 50 150 3.4 10.3 72.0 144.0 59.8 119.5 125 52 85 39Optional Motor 1/2 HP 40.0 80.0 152.0 304.0 33.2 66.4 126.2 252.3 50 175 3.4 12.1 72.0 144.0 59.8 119.5 85 39Optional Motor 3/4 HP 40.0 80.0 152.0 304.0 33.2 66.4 126.2 252.3 50 250 3.4 17.2 72.0 144.0 59.8 119.5 85 39Optional Motor 1 HP 40.0 80.0 152.0 304.0 33.2 66.4 126.2 252.3 50 350 3.4 24.1 72.0 144.0 59.8 119.5 85 39Duplex316SS 1/3 HP 80.0 160.0 304.0 608.0 66.4 132.8 252.3 504.6 50 900 3.4 62.1 72.0 144.0 59.8 119.5 200 93 110 50C-20 1/3 HP 80.0 160.0 304.0 608.0 66.4 132.8 252.3 504.6 50 900 3.4 62.1 72.0 144.0 59.8 119.5 200 93 110 50PVC 1/3 HP 80.0 160.0 304.0 608.0 66.4 132.8 252.3 504.6 50 400 3.4 27.6 72.0 144.0 59.8 119.5 125 52 110 50Kynar® 1/3 HP 80.0 160.0 304.0 608.0 66.4 132.8 252.3 504.6 50 150 3.4 10.3 72.0 144.0 59.8 119.5 125 52 110 50Note: PVC head pumps satisfactory for temperatures to 125ºF (52ºC).Note: Special materials available for services not compatible with glass.Hydraulically actuated "diapHragm pumps"21600/6000600/6000 SERIESFEATURES• Designed for high-pressure, high-volume applications• Simplex or duplex models available• Variable Oil By-pass™ stroke adjustment• Hydraulically balanced Teflon® diaphragm eliminates stress• EZE-CLEAN™ valves are removable without disturbing piping• Optional electronic positioners or variable speed drives available for auto-matic capacity control• Power train operates submerged in oil for extended service• Pump capacity is adjustable via micrometer dial while pump is running or stopped• Engineered for fluids with a viscosity to 1,000 cPs• Available with Totally Enclosed Fan Cooled (TEFC), Explosion Proof (EXP) and Chemical Plant Severe Duty (CPSD) motor enclosuresTECHNICAL DATA• Materials of construction: 316SS, C-20, Kynar®, PVC• Diaphragms: Teflon®• Valve Body & Seats: 316SS, C-20, Kynar®, PVC• Valve Checks: 316SS, C-20, Ceramic• Motor Options: 60 Hz: 1/2 HP, 3/4 HP, 1 HP, 1-1/2 HP, 2 HP 50 Hz: 0.37 kW, 0.55 kW, 0.75 kW, 1.12 kW, 1.5 kWPERFORMANCE DATA• Capacity (60 Hz): 7 gph (26.5 lph) to 240 gph (908 lph)• Capacity (50 Hz): 22 lph to 754 lph• Maximum pressures to 4,000 psi (281.5 bar)• Maximum Temperature: PVC-125ºF (52ºC); 316SS, C-20—200ºF (93ºC)CERTIFICATIONS & ASSOCIATIONSSERIES22600/6000 SERIES “DIa-PUMP” DIMENSIONS 600/6000SERIESHydraulically actuated "diapHragm pumps"MODEL 647(316SS & C-20 HEADS)MODELS 635/637/647(PVC & kYNAR HEADS)MODELS 635/637 (PVC & kYNAR)MODEL 647 (ALL MATERIALS)*Dimensions are approximate. Specifications subject to change without notice.600/6000 SERIES SELEcTION cHaRTMODELS 6100/6150/6250 (316SS HEADS)MODELS 635/637 (316SS & C-20 HEADS)Materials ofConstructionHighLowMaximumPressureCapability PistonDiameterinches (mm)Strokes PerMinute at60 Hz (50 Hz)Pressure/Horsepower1/2 HP 3/4 HP 1 HP 1-1/2 HP 2 HPpsi bar60 Hzpsi(gph)50 Hzbar(lph)60 Hzpsi(gph)50 Hzbar(lph)60 Hzpsi(gph)50 Hzbar(lph)60 Hzpsi(gph)50 Hzbar(lph)60 Hzpsi(gph)50 Hzbar(lph)600/6000316SSHigh 4000 280 2.5 (63.5) 144 (120) 1200(28)82.8(89)2000(160)n/a(507)2500(160)172(507)3500(158)241(500)4000(240)276(760)Low 200 14 0.75 (25.4) 58 (48) 500(7)35.5(22)225(7)n/a(22)275(6.5)19(21)425(6)29(19)200(4.5)14(14)C-20High 600 42 2.50 (63.5) 144 (120) n/a(n/a)n/a(n/a)225(160)16(507)275(160)19(507)425(158)29(500)600(240)41(760)Low 200 14 2.00 (58.8) 117 (98) n/a(n/a)n/a(n/a)225(130)16(412)275(130)19(412)425(129)29(409)200(126)14(399)PVC*High 150 10 2.50 (63.5) 144 (120) n/a(n/a)n/a(n/a)150(160)10(507)n/a(n/a)n/a(n/a)n/a(n/a)n/a(n/a)150(240)10(760)Low 150 10 2.00 (50.8) 117 (98) n/a(n/a)n/a(n/a)150(130)10(412)n/a(n/a)n/a(n/a)n/a(n/a)n/a(n/a)150(240)10(760)Kynar®High 150 10 2.50 (63.5) 144 (120) n/a(n/a)n/a(n/a)150(160)10(507)n/a(n/a)n/a(n/a)n/a(n/a)n/a(n/a)150(240)10(760)Low 150 10 2.00 (50.8) 117 (98) n/a(n/a)n/a(n/a)150(130)10(412)n/a(n/a)n/a(n/a)n/a(n/a)n/a(n/a)150(240)10(760)Kynar® is a registered trademark of Arkema Inc. 23500-S SERIES SELEcTION cHaRTModelNumberCapacity at 100 psi (7 Bar)60 Hz (50 Hz)Materials ofConstructionPressure 1/4 HP (0.18 kW)or1/3 HP(0.25 kW)MotorPressure 1/2 HP (0.37 kW)Motor*PistonDiameterinches (mm)Strokes Per Minute at60 Hz (50 Hz)StyleShippingWeightlbs (kg)**gph lph psi bar psi bar500-S-N3500-S-N4500-S-N50.8(0.7)3.0(2.5)316SSC-20PVC100010001507070113000n/an/a210n/an/a0.500(12.70)37(31) Simplex70(32)515-S-N3515-S-N4515-S-N53.0(2.5)11.3(9.4)316SSC-20PVC110011004007777281800n/an/a125n/an/a0.500(12.70)117(97) Simplex70(32)520-S-N3520-S-N4520-S-N52.0(1.7)7.5(6.3)316SSC-20PVC700700400494928n/a n/a 0.687(17.45)37(31) Simplex70(32)522-S-N3522-S-N4522-S-N54.0(3.3)15.1(12.6)316SSC-20PVC700700400494928n/a n/a 0.687(17.45)72(60) Simplex70(32)525-S-N3525-S-N4525-S-N57.0(5.8)26.5(22.1)316SSC-20PVC90090040063632815001500n/a105105n/a0.687(17.45)117(97) Simplex70(32)530-S-N3530-S-N4530-S-N55.5(4.6)20.8(17.3)316SSC-20PVC350350300252521n/a n/a 1.062(26.97)37(31) Simplex70(32)532-S-N3532-S-N4532-S-N511.0(9.2)41.6(34.7)316SSC-20PVC350350300252521600600n/a4242n/a1.062(26.97)72(60) Simplex70(32)535-S-N3535-S-N4535-S-N518.0(15.0)68.0(56.7)316SSC-20PVC350350300252521600600n/a4242n/a1.062(26.97)117(97) Simplex70(32)537-S-N3537-S-N4537-S-N522.0(18.3)83.0(69.2)316SSC-20PVC350350300252521400400n/a2828n/a1.062(26.97)144(120) Simplex70(32)547-S-N3†547-S-N4†547-S-N5†547-S-N8†§30.0(25.0)113.0(94.2)316SSC-20PVCKynar®20020020015014141411350350300n/a252521n/a1.187(30.15)144(120) Simplex70(32)HyDRaULIc SERIES SELEcTION cHaRTS481 & 501 SERIES SELEcTION cHaRTModelNumberMaximum (1) Capacity @ 100 psi(7 kg/cm²)Strokes Per MinuteMaximum Pressure (2)Materials ofConstruction481-S-N30.2 gph (0.75 lph)4.8 gpd(17.8 lpd)181500 psi(105 kg/cm²)@ 1/3 HP316SS501-S-N1501-S-N3501-S-N4501-S-N50.5 gph (1.9 lph)12.0 gpd(44.0 lpd)181500 psi(105 kg/cm²)@ 1/3 HP3000 psi(210 kg/cm²)@ 1/2 HPCast Iron316SSC-20PVCPVC and Kynar® models, 125°F (52°C) maximum.PVC and Kynar® models, 125°F (52°C) maximum.24500-a SERIES SELEcTION cHaRTModelNumberCapacity at 100 psi (7 Bar)60 Hz (50 Hz)Materials ofConstructionMaximumPressurePistonDiameterinches (mm)Strokes Per Minute at60 Hz (50 Hz)ShippingWeightlbs (kg)***gph lph psi bar500-A-N3500-A-N4500-A-N51.0(0.8)3.7(3.1)316SSC-20PVC100010001507070110.500(12.70)37(31)60(27)515-A-N3515-A-N4515-A-N53.0(2.5)11.3(9.4)316SSC-20PVC110011004007777250.500(12.70)117(97)60(27)520-A-N3520-A-N4520-A-N52.0(1.7)7.5(6.3)316SSC-20PVC7007004004949280.687(17.45)37(31)60(27)522-A-N3522-A-N4522-A-N54.0(3.3)15.1(12.6)316SSC-20PVC7007004004949280.687(17.45)72(60)60(27)525-A-N3525-A-N4525-A-N57.0(5.8)26.5(22.0)316SSC-20PVC9009004006363280.687(17.45)117(97)60(27)530-A-N3530-A-N4530-A-N55.5(4.6)20.8(17.3)316SSC-20PVC3503503002525211.062(26.97)37(31)60(27)532-A-N3532-A-N4532-A-N511.0(9.2)41.6(34.7)316SSC-20PVC3503503002525211.062(26.97)72(60)60(27)535-A-N3535-A-N4535-A-N518.0(15.0)68.1(56.8)316SSC-20PVC3503503002525211.062(26.97)117(97)60(27)547-S-N8§ 30.0(25.0)113.0(94.2) Kynar® 150 111.187(30.15)144(120)70(32)500-E SERIES SELEcTION cHaRTModelNumberCapacity at 100 psi (7 Bar)60 Hz (50 Hz)Materials ofConstructionMaximumPressurePistonDiameterinches (mm)Strokes Per Minute at60 Hz (50 Hz)ShippingWeightlbs (kg)***gph lph psi bar510-E-N3*510-E-N5*510-E-AR*510-E-N8*0.8(0.7)3.0(2.5)316SSPVCHypochloriteKynar®700 1501504911110.500(12.70)37(31)59(27)515-E-N3515-E-N5515-E-AR515-E-N83.0(2.5)11.3(9.4)316SSPVCHypochloriteKynar®1100 150 150 150771111110.500(12.70)117(97)59(27)520-E-N3520-E-N5520-E-N82.0(1.7)7.5(6.2)316SSPVCKynar®700 150 1504911110.687(17.40)37(31)59(27)522-E-N3522-E-N5522-E-AR522-E-N84.0(3.3)15.1(12.5)316SSPVCHypochloriteKynar®700 150 150 150491111110.687(17.40)72(60)59(27)525-E-N3525-E-N5525-E-AR525-E-N87.0(5.8)26.5(22.0)316SSPVCHypochloriteKynar®900 150 150 150631111110.687(17.40)117(97)59(27)527-E-AR 8.6(7.1)32.0(26.6) Hypochlorite 150 110.687(17.40)144(119)59(27)532-E-N3532-E-N5532-E-N811.0(9.1)41.6(34.5)316SSPVCKynar®350 150 1502511111.062(27.00)72(60)59(27)535-E-N3535-E-N5535-E-N818.0(14.9)68.0(56.4)316SSPVCKynar®350 150 1502511111.062(27.00)117(97)59(27)547-SE-N3547-SE-N530.0(24.9)113.0(93.8)316SSPVC200 15014111.187(30.10)144(119)65(30)547-DE-N330.0(24.9)ea. head113.0 (93.8) each316SS 200 14 1.187(30.10)144(119)85(39)ModelNumberCapacity at 100 psi (7 Bar)60 Hz (50 Hz)Materials ofConstructionPressure 1/4 HP (0.18 kW)or1/3 HP(0.25 kW)MotorPressure 1/2 HP (0.37 kW)Motor*PistonDiameterinches (mm)Strokes Per Minute at60 Hz (50 Hz)StyleShippingWeightlbs (kg)**gph lph psi bar psi bar500-S-N3500-S-N4500-S-N50.8(0.7)3.0(2.5)316SSC-20PVC100010001507070113000n/an/a210n/an/a0.500(12.70)37(31) Simplex70(32)515-S-N3515-S-N4515-S-N53.0(2.5)11.3(9.4)316SSC-20PVC110011004007777281800n/an/a125n/an/a0.500(12.70)117(97) Simplex70(32)520-S-N3520-S-N4520-S-N52.0(1.7)7.5(6.3)316SSC-20PVC700700400494928n/a n/a 0.687(17.45)37(31) Simplex70(32)522-S-N3522-S-N4522-S-N54.0(3.3)15.1(12.6)316SSC-20PVC700700400494928n/a n/a 0.687(17.45)72(60) Simplex70(32)525-S-N3525-S-N4525-S-N57.0(5.8)26.5(22.1)316SSC-20PVC90090040063632815001500n/a105105n/a0.687(17.45)117(97) Simplex70(32)530-S-N3530-S-N4530-S-N55.5(4.6)20.8(17.3)316SSC-20PVC350350300252521n/a n/a 1.062(26.97)37(31) Simplex70(32)532-S-N3532-S-N4532-S-N511.0(9.2)41.6(34.7)316SSC-20PVC350350300252521600600n/a4242n/a1.062(26.97)72(60) Simplex70(32)535-S-N3535-S-N4535-S-N518.0(15.0)68.0(56.7)316SSC-20PVC350350300252521600600n/a4242n/a1.062(26.97)117(97) Simplex70(32)537-S-N3537-S-N4537-S-N522.0(18.3)83.0(69.2)316SSC-20PVC350350300252521400400n/a2828n/a1.062(26.97)144(120) Simplex70(32)547-S-N3†547-S-N4†547-S-N5†547-S-N8†§30.0(25.0)113.0(94.2)316SSC-20PVCKynar®20020020015014141411350350300n/a252521n/a1.187(30.15)144(120) Simplex70(32)ModelNumberMaximum (1) Capacity @ 100 psi(7 kg/cm²)Strokes Per MinuteMaximum Pressure (2)Materials ofConstruction481-S-N30.2 gph (0.75 lph)4.8 gpd(17.8 lpd)181500 psi(105 kg/cm²)@ 1/3 HP316SS501-S-N1501-S-N3501-S-N4501-S-N50.5 gph (1.9 lph)12.0 gpd(44.0 lpd)181500 psi(105 kg/cm²)@ 1/3 HP3000 psi(210 kg/cm²)@ 1/2 HPCast Iron316SSC-20PVCPVC and Kynar® models, 125°F (52°C) maximum.PVC and Kynar® models, 125°F (52°C) maximum.PVC and Kynar® models, 125°F (52°C) maximum.PVC and Kynar® models, 125°F (52°C) maximum.25500-VS SERIES SELEcTION cHaRT500-T SERIES SELEcTION cHaRTModelNumberMaterials ofConstructionCapacity at 100 psi (7 Bar)60 Hz (50 Hz)MaximumPressurePistonDiameterinches (mm)Strokes Per Minute at60 Hz (50 Hz)ShippingWeightlbs (kg)***gph lph psi bar515-VS-N3 316SS 3.0(2.5)11.3(9.4) 900 630.500(12.7)117(97)70(32)520-VS-N3 316SS 2.0(1.7)7.5(6.2) 400 280.687(17.4)37(31)70(32)522-VS-N3 316SS 4.0(3.3)15.1(12.5) 500 350.687(17.4)72(30)70(32)525-VS-N3 316SS 7.0(5.8)26.5(22.0) 700 490.687(17.4)117(97)70(32)530-VS-N3 316SS 5.5(4.6)20.8(17.3) 300 211.062(27.0)37(31)70(32)532-VS-N3 316SS 11.0(9.1)41.6(34.5) 300 211.062(27.0)72(30)70(32)535-VS-N3 316SS 18.0(14.9)68.0(56.4) 300 211.062(27.0)117(97)70(32)537-VS-N3 316SS 22.0(18.3)83.0(68.9) 300 211.062(27.0)144(119)70(32)547-VS-N3 316SS 30.0(24.9)113.0(93.8) 200 14* 1.187(30.1)144(119)70(32)ModelNumberMaterials ofConstructionCapacity at 100 psi (7 Bar)60 Hz (50 Hz)MaximumPressurePistonDiameterinches (mm)Strokes Per Minute at60 Hz (50 Hz)ShippingWeightlbs (kg)***gph lph psi bar515-T-N3515-T-N7316SS316SS3.0(2.5)11.3(9.4)300 1002280.500(12.7)117(97)80(36)520-T-N3520-T-N7316SS316SS2.0(1.7)7.5(6.2)300 1002280.687(17.4)37(31)80(36)522-T-N3522-T-N7316SS316SS4.0(3.3)15.1(12.5)300 1002280.687(17.4)72(30)80(36)525-T-N3525-T-N7316SS316SS7.0(5.8)26.5(22.0)300 1002280.687(17.4)117(97)80(36)530-T-N3530-T-N7316SS316SS5.5(4.6)20.8(17.3)300 1002281.062(27.0)37(31)80(36)532-T-N3532-T-N7316SS316SS11.0(9.1)41.6(34.5)300 1002281.062(27.0)72(30)80(36)535-T-N3535-T-N7316SS316SS18.0(14.9)68.0(56.4)300 1002281.062(27.0)117(97)80(36)547-T-N3*547-T-N7*316SS316SS30.0(24.9)113.0(93.8)200 1001581.062(27.0)144(119)80(36)562-T-N3562-T-N7316SS316SS40.0(33.2)151.0(125.3)175 1001382.0(50.8)72(30)95(43)565-T-N3565-T-N7316SS316SS65.0(54.0)246.0(204.2)175 1001382.0(50.8)117(97)95(43)567-T-N3567-T-N7316SS316SS80.0(66.4)302.0(250.7)175 1001382.0(50.8)144(119)95(43)HyDRaULIc SERIES SELEcTION cHaRTS cONTINUEDPVC and Kynar® models, 125°F (52°C) maximum.PVC and Kynar® models, 125°F (52°C) maximum.26ModelNumberMaterials ofConstructionCapacity at 100 psi (7 Bar)60 Hz (50 Hz)MaximumPressurePistonDiameterinches (mm)Strokes Per Minute at60 Hz (50 Hz)ShippingWeightlbs (kg)***gph lph psi bar515-VS-N3 316SS 3.0(2.5)11.3(9.4) 900 630.500(12.7)117(97)70(32)520-VS-N3 316SS 2.0(1.7)7.5(6.2) 400 280.687(17.4)37(31)70(32)522-VS-N3 316SS 4.0(3.3)15.1(12.5) 500 350.687(17.4)72(30)70(32)525-VS-N3 316SS 7.0(5.8)26.5(22.0) 700 490.687(17.4)117(97)70(32)530-VS-N3 316SS 5.5(4.6)20.8(17.3) 300 211.062(27.0)37(31)70(32)532-VS-N3 316SS 11.0(9.1)41.6(34.5) 300 211.062(27.0)72(30)70(32)535-VS-N3 316SS 18.0(14.9)68.0(56.4) 300 211.062(27.0)117(97)70(32)537-VS-N3 316SS 22.0(18.3)83.0(68.9) 300 211.062(27.0)144(119)70(32)547-VS-N3 316SS 30.0(24.9)113.0(93.8) 200 14* 1.187(30.1)144(119)70(32)560-S SERIES SELEcTION cHaRTModelNumberCapacity at 100 psi (7 Bar)60 Hz (50 Hz)Materials ofConstructionPistonDiameterinches (mm)Strokes PerMinuteat 60 Hz(50 Hz)Pressure/HorsepowerStyleShippingWeightlbs. (kg)*1/3 HP(0.25 kW)*1/2 HP(0.37 kW)*3/4 HP(0.55 kW)*1 HP(0.75 kW)*gph lph psi bar psi bar psi bar psi bar562-S-N3562-S-N4562-S-N5562-S-N840(33.3)151(125.8)316SSC-20PVCKynar®2.0(50.80)72(60) 100 7 175 12 250 18 350 25 Simplex85(39)565-S-N3565-S-N4565-S-N5565-S-N865(54.2)246(205.0)316SSC-20PVCKynar®2.0(50.80)117(97) 100 7 175 12 250 18 350 25 Simplex85(39)567-S-N3567-S-N4567-S-N5567-S-N880(66.7)302(251.7)316SSC-20PVCKynar®2.0(50.80)144(120) 100 7 175 12 250 18 350 25 Simplex85(39)ORDERINg INFORMaTIONModelNumberMaterials ofConstructionCapacity at 100 psi (7 Bar)60 Hz (50 Hz)MaximumPressurePistonDiameterinches (mm)Strokes Per Minute at60 Hz (50 Hz)ShippingWeightlbs (kg)***gph lph psi bar515-T-N3515-T-N7316SS316SS3.0(2.5)11.3(9.4)300 1002280.500(12.7)117(97)80(36)520-T-N3520-T-N7316SS316SS2.0(1.7)7.5(6.2)300 1002280.687(17.4)37(31)80(36)522-T-N3522-T-N7316SS316SS4.0(3.3)15.1(12.5)300 1002280.687(17.4)72(30)80(36)525-T-N3525-T-N7316SS316SS7.0(5.8)26.5(22.0)300 1002280.687(17.4)117(97)80(36)530-T-N3530-T-N7316SS316SS5.5(4.6)20.8(17.3)300 1002281.062(27.0)37(31)80(36)532-T-N3532-T-N7316SS316SS11.0(9.1)41.6(34.5)300 1002281.062(27.0)72(30)80(36)535-T-N3535-T-N7316SS316SS18.0(14.9)68.0(56.4)300 1002281.062(27.0)117(97)80(36)547-T-N3*547-T-N7*316SS316SS30.0(24.9)113.0(93.8)200 1001581.062(27.0)144(119)80(36)562-T-N3562-T-N7316SS316SS40.0(33.2)151.0(125.3)175 1001382.0(50.8)72(30)95(43)565-T-N3565-T-N7316SS316SS65.0(54.0)246.0(204.2)175 1001382.0(50.8)117(97)95(43)567-T-N3567-T-N7316SS316SS80.0(66.4)302.0(250.7)175 1001382.0(50.8)144(119)95(43)When ordering, please include the following information:1. Description of liquid to be pumped. Include chemical name, concentration, viscosity, pH and temperature of solution.2. Maximum, normal and minimum pump capacity required.3. Discharge pressure required.4. Suction conditions.5. Motor characteristics required.PVC and Kynar® models, 125°F (52°C) maximum.PVC and Kynar® models, 125°F (52°C) maximum.PVC and Kynar® models, 125°F (52°C) maximum.27HyDRaULIc SERIES SELEcTION cHaRTS cONTINUED600/6000 SERIES SELEcTION cHaRTModelNumberMaterials ofConstructionMaximumPressureCapability PistonDiameterinches (mm)Strokes PerMinuteat 60 Hz(50 Hz)Pressure/Horsepower1/2 HP 3/4 HP 1 HP 1-1/2 HP 2 HPpsi bar60 Hzpsi(gph)50 Hzbar(lph)60 Hzpsi(gph)50 Hzbar(lph)60 Hzpsi(gph)50 Hzbar(lph)60 Hzpsi(gph)50 Hzbar(lph)60 Hzpsi(gph)50 Hzbar(lph)6100-N3 316SS 4000 280 0.75(19.05)58(48)1200(7)82.8(22)2000(7)138(22)2500(6.5)172(21)3500(6)241(19)4000(4.5)276(14)6150-N3 316SS 4000 280 0.75(19.05)117(98)1000(15)69.0(47)1500(15)103(46)2000(14)138(44)3000(13)207(41)3500(12.5)241(40)6250-N3 316SS 2000 140 1.00(25.4)117(98)500(28)34.5(89)800(28)55(89)1000(28)69(89)1500(27.5)103(87)2000(26)138(82)635-N3 316SS 600 42 2.00(50.8)117(98) n/a n/a225(130)16(412)275(130)19(412)425(129)29(409)600(126)41(399)635-N4 C-20 600 42 2.00(50.8)117(98) n/a n/a225(130)16(412)275(130)19(412)425(129)29(409)600(126)41(399)635-N5 PVC 150 10 2.00(50.8)117(98) n/a n/a150(130)10(412) n/a n/a n/a n/a n/a n/a635-N8 Kynar® 150 10 2.00(50.8)117(98) n/a n/a150(130)10(412) n/a n/a n/a n/a n/a n/a637-N3 316SS 600 42 2.00(50.8)144(120) n/a n/a225(160)16(507)275(160)19(507)425(158)29(500)600(154)41(488)637-N4** C-20 600 42 2.00(50.8)144(120) n/a n/a225(160)16(507)275(160)19(507)425(158)29(500)600(154)41(488)637-N5 PVC 150 10 2.00(50.8)144(120) n/a n/a150(160)10(507) n/a n/a n/a n/a n/a n/a637-N8** Kynar® 150 10 2.00(50.8)144(120) n/a n/a150(160)10(507) n/a n/a n/a n/a n/a n/a647-N3 316SS 200 14 2.50(63.5)144(120) n/a n/a n/a n/a n/a n/a n/a n/a200(240)14(760)647-N4** C-20 200 14 2.50(63.5)144(120) n/a n/a n/a n/a n/a n/a n/a n/a200(240)14(760)647-N5 PVC 150 10 2.50(63.5)144(120) n/a n/a n/a n/a n/a n/a n/a n/a150(240)10(760)647-N8** Kynar® 150 10 2.50(63.5)144(120) n/a n/a n/a n/a n/a n/a n/a n/a150(240)10(760)Enclosure Phase Voltage 1/2 HP 3/4 HP 1 HP 1-1/2 HP 2 HPTEFC 1 115/230 100740 100747 100753 n/a n/aTEFC 3 230/460 100742 100749 100755 100761 100767EXP 1 115/230 100744 100751 100757 n/a n/aEXP 3 230/460 100745 100752 100758 100764 100770CPSD 1 115/230 100741 100748 100754 n/a n/aCPSD 3 230/460 100746 100750 100756 100762 100768Part CodeN3CodeN4CodeN5CodeN8Liquid Head 316SS C-20 PVC Kynar®Diaphragm Teflon® Teflon® Teflon® Teflon®Valve Body& Seat 316SS C-20 PVC Kynar®Valve Checks 316SS C-20 Ceramic Ceramic"O"-rings Viton® Viton® Viton® Viton®600/6000 SERIES MOTOR SELEcTION cHaRT 600/6000 SERIES MaTERIaLS OF cONSTRUcTIONPVC and Kynar® models, 125°F (52°C) maximum.Teflon® is a registered trademark of E.I. du Pont de Nemeurs and CompanyKynar® is a registered trademark of Arkema Inc.Viton® is a registered trademark of E.I. du Pont de Nemeurs and Company28INjECTION QUILLSUsed to inject chemicals pumped by metering pumps into turbulent-flow zone of high-pressure water or steam lines.• Operating pressures to 3,000 psi (207 bar)• Spring-loaded check valve• Available in 316SS, PVC, Kynar® and C-20• Available in 1/2" and 3/4" NPTCORPORATION STOPSUsed for rapid injection and dispersion of chemicals pumped into tanks, mains, cooling towers and process systems without the need to shut down the system.• Operating pressures to 150 psi (10 bar)• Available in 316SS, PVC, Kynar® and C-20• Available in 1/2" through 1” NPT or AWWA• Lever-operated stop and protection chain standard• Available with choice of Bronze or 316SSBACk PRESSURE VALVE & PRESSURE RELIEF VALVESEnsure the set pressure is maintained at the pump outlet port to assure accurate metering and prevent siphoning, while protecting against overpressure.• Available in 316SS, PVC, Kynar® and C-20• PTFE diaphragmCALIBRATION COLUMNSA fast, easy, economical way to check the flow rate of a chemical metering pump.• PVC with slip-on caps for top filling and easy cleaning• Shielded-glass available for acid and strong chemical applications• Mylar lamination for protection against harsh chemicals• 100-4,000 ml capacity (dual scales)SAMPLE COOLERSCools hot water and steam samples for easy handling and sample collection.• Available in all 316SS with Inconel®, and or carbon steel with 316SS tubing• Available in 3,500 psi (241 bar) at 750°F (399°C) and 1,500 psi (103 bar) at 600°F (316°C) design pressuresPULSATION DAMPENERSRemove the pulsating flow caused by a pump’s reciprocating action, ensuring a smooth, laminar flow.• Equipped with pressure gauge and charging valve• Pressure ratings to 1,000 psi (69 bar) with 4:1 safety marginEZE-GRAB PLATFORMSFor portable pump installations, molded polyethylene base provides elevated platform for use indoors or outdoors.• Handles allow the pump to be moved easilyNIMBLE SkID PUMP PACkAGESComplete metering systems ready to use with any bulk or intermediate bulk chemical container.• Available in 18" x 30" and 24" x 46" footprints• Can be used with electronic or motor-driven diaphragm pumps• Containment available for all systemsKynar® is a registered trademark of Arkema Inc.Inconel® is a registered trademark of Special Metals CorporationaccESSORIESBY-PASS FEEDERSUsed to introduce chemicals into closed circulating-wwater systems.• Dish bottom in or dish bottom out models available• Standard high-pressure cap rated to 300 psi• Filter bags available in 1-, 5-, 20- and 50-micron ratings30-GALLON MINI-TANkFor use with any hydraulic or electric metering diaphragm pump.• Available with or without containmentPVC and Kynar® models, 125°F (52°C) maximum.29FLUID DYNAMICS™Incorporated in 1974 and acquired by Neptune in 2004, Fluid Dynamics™ is a market leader in polymer-blending technology for use in the water and wastewater, agriculture, oil and gas, and mining industries. Its dynaBLEND™ polymer-blending technology was patented in 1985 as a revolutionary non-mechanical polymer-blending system. More than 25 years and thousands of dynaBLEND installations later, Fluid Dynamics remains a premier polymer equip-ment company.PZ SERIES ELECTRONIC METERING PUMPSPZ Series pumps from Neptune are ideal for chemical dosing, chlorine sterilization and nutri-ent injection applications. They meet the needs of these types of applications thanks to their state-of-the-art control and programmable features, in-cluding speed adjustment from 1 to 300 strokes per minute, which allows for more uniform distri-bution at all feed rates. The pumps are waterproof and UV-resistant, and unaffected by voltage fluc-tuations from 94 to 264 VAC and 50/60 Hz.CHEMICAL FEED SYSTEMSNeptune’s chemical feed systems are offered with or without containment, and are a complete turnkey solution to all chemical feed needs, no matter how large or small. Neptune also offers By-Pass and Filter Feeders for boiler treatment, Bromine Feeders for cooling tower treatment and Glycol Feeders for chilled and hot water loops. Neptune chemical feed systems are also completely customizable to meet all end-user requirements.POLYMER BLEND & FEED SYSTEMSNeptune’s Polymaster™ Polymer Blend & Feed system thoroughly dilutes, mixes and activates emulsion, dispersion and solution polymers. The key to the Polymaster’s operation is the patented Gatlin Distribution Head that hydraulically segments the polymer into ultra-thin platelets. This segmen-tation maximizes the amount of the polymer’s surface area that is exposed to the dilution water, which optimizes activation and is unaffected by fluctu-ating water pressures or dilution-water ratio changes.PORTABLE MIXERSThe Neptune Mixer Company offers and manufactures a complete line of portable top-entering mixers, which are ideal for blending liquids, suspending or dissolving solids, dispersing immiscible liquids, and dispersing small amounts of gases in liq-uids, making them highly reliable in waste treatment, water treatment, and batch chemical preparation applications. The pumps can be clamp- or base-mounted on beams, tank walls, or other supports.dynaBLEND™LIqUID POLyMER bLENDINg SySTEMdynaJET™DRy POwDER PREPaRaTION SySTEMdynaBLEND™DRy POLyMER PREPaRaTION SySTEMminiBLEND™LIqUID POLyMER bLENDINg SySTEMOTHER PRODUcTS OFFERED30NOTES31Printed in the u.s.a. Copyright 2011 neptune™ nPT-10001-C-01your distributor:295 deKalb Pike • north Wales, Pa 19454Phone: 215.699.8700 • Toll Free: 1.888.3nePTune • Fax: 215.699.0370email: info@neptune1.com