Hydro Safe Standard Hydraulic Fluid pdf

Hydro Safe, Inc. 13626 Pearwood Drive DeWitt, MI ichigan 48820 Voice: 800-500-5058 Fax: 517-669-1207 www.hydrosafe.com Hydro Safe® Standard Hydraulic Fluid (ISO VG 22, 32, 46, 68) "Biobased Lubricants that Perform Like Synthetics" Hydro Safe® Hydraulic Fluids are ultimately biodegradable1 vegetable based formulas that meets and exceeds Vickers M-2950-S, Vickers 1-286-5, U.S. Steel 126, and U.S. Steel 127. These patented biobased hydraulic fluids are formulated to perform in fleet, marine, and industrial hydraulic systems that require Anti-Wear (AW), anti-rust, anti-oxidation, anti-foam, and demulsibility properties. An environmentally friendly, zinc-free additive system has also been developed that meets or exceeds high pressure pump requirements. The anti-wear performance meets the requirements for Vickers 35VQ-25 and V-104C (ASTM D-2882) vane pump stand tests, and exceeds DIN 51524 Part 2 load stage 10 that is recommended for piston and gear pumps. Hydro Safe, ® Hydraulic Fluids are the perfect economical choice for hydraulic equipment operating outside, where unpredictable higher moisture and dusty environments are more prominent and the equipment require more frequent oil change intervals. They are highly inhibited against moisture and rusting in both fresh and sea water, passed both A and B Sequences of the ASTM D-665 Turbine Oil Rust Test, and they provide excellent water separation as shown in ASTM D-1401 Demulsibility Test. Incorporating the super high viscosity index (VI) of the Stabilized* High Oleic Base Stocks (HOBS) into the formula, increases the VI past synthetic levels (Energy Conserving Formulas). In addition, this super high VI naturally improves the thermal and mechanical shear stability of the formula and provides additional fluid protection under higher loads and pressures. The HOBS’s extremely low volatility increases the flash and fire safety features in the formula. These biobased fluids are designed to provide seal conditioning for longer seal life and to reduce oil leakage from the system. Hydro Safe® Hydraulic Fluids should be used in hydraulic applications where low toxicity and BIODEGRADABILITY properties are required. Hydro Safe® Hydraulic Fluids are ENVIRONMENTALLY RESPONSIBLE lubricants that are formulated from renewable agricultural plant resources. We believe Earth's environmental future rests in the use of renewable materials. STABILIZED by Hydro Safe, Inc.® is HS’s trademark on their proprietary and patented anti-oxidant, anti-wear, and cold flow technology. High Oleic Base Stock (HOBS) are agricultural vegetable oils. This Stabilized technology allows the HOBS to perform as a high performance formula in high and low temperature applications, reducing oil thickening and deposits. 1 Ultimate Biodegradation (Pw1) within 28 days in ASTM D-5864 Aerobic Aquatic Biodegradation of Lubricants Patented Product: US Patent 6,383,992, US Patent 6,534,454 with additional Pending and Foreign Patents * Trademark of Hydro Safe®, Inc. Copyright 1999 Hydro Safe®, Inc. Availability F.O.B. :Hartville, Ohio, USA 5 Gallon Pails Drums Bulk Hydro Safe®, Inc. Standard Hydraulic Fluids ISO 22, 32, 46, 68 TYPICAL SPECIFICATIONS METHOD ISO 22 ISO 32 ISO 46 ISO 68 Spec. Requirements Specific Gravity @ 15.6°C Viscosity @ 40°C Viscosity @ 100°C Viscosity @ -25°C, Brookfield Viscosity Index ASTM D-287 ASTM D-445 ASTM D-445 ASTM D-2983 ASTM D-2270 0.88 22.3 5.27 1,000 cP 182 0.88 30.5 6.7 1,400 cP 186 0.88 43.1 8.8 3,400 cP 190 0.88 62.8 11.9 4,700 cP 189 Report Note 1 Note 1 Note 1 90 (min) Pour Point Flash Point (COC) Fire Point (COC) Foam Sequence I, II, III (10 min) Rust Prevention Distilled Water Syn. Sea Water ASTM D-97 ASTM D-92 ASTM D-92 ASTM D-892 ASTM D-665 -38°C 205°C 230°C 0 Foam Pass Pass -35°C 232°C 255°C 0 Foam Pass Pass -33°C 240°C 264°C 0 Foam Pass Pass -30°C 248°C 270°C 0 Foam Pass Pass Note 1 198°C (min) 218°C (min) 0 Foam Pass Pass Copper Corrosion Strip 3hr @ 100°C ASTM D-130 1A 1A 1A 1A DIN 51524 2(max) Dielectric Strength, KV (Avg) ASTM D-877 46 40 40 40 >35 Rotary Bomb Oxidation, (minutes) Neutralization Number mg KOH/g Swell of Synthetic NBR-L Rubber, % (Avg.) Volume Change (%) Shore A Hardness Change (%) Demulsibility, ML Oil/Water/Emulsion 4-Ball Wear, 1h, 167°F, 1200 RPM, 40 kg FZG Test ASTM D-2272 ASTM D-974 DIN 53538, Part 1 ASTM D-1401 ASTM D-4172 DIN 51354 270 0.5 8.0 -5 40/40/0 <10 minutes 0.42 11 272 0.5 6.0 -4 40/ 40/0 <10 minutes 0.40 11 270 0.5 5.0 -4 40/ 40/0 <10 minute 0.40 11 260 0.5 5.0 -4 40/ 40/0 <10 minute 0.40 11 USS 120 (min) 1.5 (max) 0 to 12 0 to -7 40/37/3 (max) (30 minutes) USS 127 0.5 (max) US.Steel 10 (min) Biodegradation Classification Environmentally Friendly USDA Biobased Tested Note 1 Viscosity Sufficient for Application Note 2 Not Required HS® Product Item # ASTM D-5864 ISO 15380 New Carbon Ultimate PW1 yes yes 8081 Ultimate PW1 yes yes 8082 Ultimate PW1 yes yes 8083 Ultimate PW1 yes yes 8084 Ultimate PW1 meets/exceeds over 50%