Hydro Safe VG-46FR and 68FR (Fire Resistant) pdf

Hydro Safe® 13626 Pearwood Drive DeWitt, Michigan 48820 Voice: 800-500-5058 Fax 517-669-1207 Web: www.hydrosafe.com Hydro Safe® Hydraulic Fluid (ISO VG-46 & VG-68 FR Fluids) "Biobased Lubricants that Perform Like Synthetics" Hydro Safe® Hydraulic Fluids are ultimately biodegradable1 vegetable based formulas that meet and exceed Vickers M-2950-S, Vickers 1-286-5, U.S. Steel 126, U.S. Steel 127, and U.S. Steel 136. They have been USDA Biobased tested to show new carbon (vegetable oil) at > 96% and they are Specially formulated to offer the lowest toxicity in aquatic conditions. They are an excellent choice for inner plant applications (ie. Steel Mills) as fire resistant (FR) hydraulic fluids, with exceptional oxidation stability (RBOT 350-400 minutes) exceeding US Steel minimum requirement of 120 minutes. Although they have a pour point of -25°C and -30°C, care must be taken if used in hydraulic systems setting static below -10°C for extended periods. Hydro Safe® Hydraulic Fluids are formulated to perform in hydraulic systems that require Anti-Wear, Anti-Rust, and Anti-Oxidation properties. There anti-wear performance exceeds the requirements for Vickers 35VQ-25 and V-104C (ASTM D-2882) vane pump stand tests, and DIN 51524 Part 2 load stage 10. They also meet the requirements for ashless GL-3 gear oils in reduction units and gear sets where they meet the viscosity ranges. They are highly inhibited against moisture and rusting in both fresh and sea water and pass both A and B Sequences of the ASTM D-665 Turbine Oil Rust Test. Incorporating the super high viscosity index of the Stabilized* High Oleic Base Stocks (HOBS) into the formulas, gives multi-grade synthetic base oils performance by boosting the viscosity index to synthetic levels (Energy Conserving Formulas) A zinc-free additive system has also been developed that is environmentally friendly and meets or exceeds pump requirements. The super high viscosity index of the HOBS naturally improves the thermal shear stability of the formulas and their load capacity. The HOBS’s extremely low volatility increases the flash and fire safety features in these formulas. (Can be listed by Factory Mutual as less hazardous fluids) Hydro Safe® Hydraulic vegetable based fluids should be used where improved oxidation stability, excellent anti-wear performance, low toxicity, and BIODEGRADABILITY properties are required. Hydro Safe® Hydraulic Fluids are ENVIRONMENTALLY RESPONSIBLE hydraulic fluids that are formulated from renewable agricultural plant resources. We believe Earth's environmental future rests in the use of renewable materials. Pump Performance Denison T-5D Vane Pass Vickers 35VQ 25 Pump Pass (3000 psi, 2400 rpm, 93.3 O C) Vickers V-104C Pump Pass (2000 psi, 1200 rpm, 79.4 O C) Vickers 20VQ5 Pass STABILIZED by Hydro Safe®, Inc.* is Hydro Safe’s trademark on their proprietary and patented anti-oxidant, anti-wear, and cold flow technology. High Oleic Base Stock (HOBS) are agricultural vegetable oils. This Stabilized technology allows the HOBS to perform as a high performance formula in high and low temperature applications, reducing oil thickening and deposits. 1 Ultimate Biodegradation (Pw1) within 28 days in ASTM D-5864 Aerobic Aquatic Biodegradation of Lubricants Patented Product: US Patent 6,383,992, US Patent 6,534,454 with additional Pending and Foreign Patents * Trademark of Hydro Safe® Copyright 1999 Hydro Safe® Availability F.O.B. :Hartville, Ohio, USA 5 Gallon Pails Drums Bulk Hydro Safe® Hydraulic Fluid TYPICAL SPECIFICATIONS Page 2 TEST METHOD Hydro Safe® VG-46FR Hydro Safe® VG-68FR Specific Gravity @ 15.6°C Viscosity @ 40°C Viscosity @ 100°C Viscosity @ -15°C, Brookfield Viscosity Index ASTM D-287 ASTM D-445 ASTM D-445 ASTM D-2983 ASTM D-2270 0.92 44.0 9.6 20,000 cP 212 0.92 64.0 13.4 24,000 cP 218 Pour Point Flash Point (COC) Fire Point (COC) Foam Sequence I, II, III (10 min) Rust Prevention Distilled Water Syn. Sea Water ASTM D-97 ASTM D-92 ASTM D-92 NOACK ASTM D-892 ASTM D-665 -30°C 290°C 340°C 1% 0 Foam Pass/Clean Pass/Clean -25°C 299°C 343°C 1% 0 Foam Pass/Clean Pass/Clean Accelerated Storage Stability Copper Corrosion Strip 3hr @ 100°C ASTM D-130 Pass 1A Pass 1A RPVOT, (min) Acid Number Elastomer Testing BUNA-N Rubber Volume Change, % Shore A Hardness Change Demulsibility, ML Oil/Water/Emulsion 4-Ball Wear, 1h, 167°F, 1200 RPM, 40 kg FZG Test ASTM D-2272 ASTM D-974 D-471 D-2240 ASTM D-1401 ASTM D-4172 DIN 51354 200-250 0.4 2.0 0.0 40/ 40/ 0 .30-.40 12 200-250 0.4 2.0 0.0 40/ 40/ 0 .30-.40 12 Biodegradability Ecotoxicity Fathead minnow, 96h LC50, ppm Daphnis magna, 48 h, EC50, ppm Sludge respiration inhibition, EC50, ppm Meets EPA requirements 560/6-82-002, 560/6-82-003 Biodegradation Classification Environmentally Friendly USDA Biobased Tested Environmental Management System Hydro Safe Product Item # CEC-L33-T-82 OECD 301B Mod. Sturm ASTM D-5864 ASTM D-5864 ISO 15380 New Carbon ISO 14001:1996 >80% >60% >60% >10,000 ppm >10,000 WAF >10,000 ppm Ultimate PW1 Yes yes yes 81600 >80% >60% >60% >10,000 ppm >10,000 WAF >10,000 ppm Ultimate PW1 Yes yes yes 81610