Hydrolox - Series 6000 - Flush Grid Engineered Polymer Screen Brochure

Product Line ExtensionHYDROLOXUS 1-866-586-2825Europe +800 3344 5544www.hydrolox.comSeries 6000 Flush Grid Engineered Polymer ScreenThe Hydrolox Series 6000 Flush Grid Engineered Polymer Screensubstantially reduces capital and operating costs in screeningapplications, such as cooling water intakes. The Series 6000 Flush Grid screen is available with both 3-piecedebris flights and 3-piece Ristroph-style fish buckets, which may beinterchanged to help power companies comply with regulations forreducing fish impingement and entrainment. Flights can be placed atvarious distances on the Series 6000 Flush Grid screen to preventdebris carryover. The 3-piece flight and bucket designs allow endusers to perform on-site maintenance without costly screen removal.Installation is also simplified as the screens are designed to fit intoexisting slots for traditional steel vertical traveling screens.• Screen life in abrasive applications is at least five times longer than that of steel vertical traveling screens.• Screen is designed to operate at up to 5.0 ft (1.5 m) of head differential.• Slot opening design and smooth screen surface facilitate effective cleaning.• Reduces maintenance needs and corresponding costs.• Light screen weight and low maintenance improve worker safety.Contact us today for a sample of this new product or for more information.3-Piece Debris FlightAvailable Flight HeightMaterialin. mm4 102 Engineered PolymerNote: Flights consist of 3 pieces: the base module, the attachment, and the rod.Note: Flight surface has 0% open area and a No-Cling surface. The base module has the S6000 FG design.Note: The minimum indent is 4 in. (102 mm).3-Piece Ristroph-Style Fish BucketAvailable Bucket HeightMaterialin. mm3.8 96.5 Engineered PolymerNote: Buckets consist of 3 pieces: the base module, the attachment, and the rod.Note: The minimal indent is 4 in. (102 mm). The recommended indent is 6 in. (152 mm).Product Line ExtensionEngineered Polymer Screenin. mmPitch 3.5 88.9Minimum Width 10 254Width Increments 2.0 50.8Opening Size (approximate) 0.25 x 0.30 6.35 x 7.62Open Area 48%Hinge Style ClosedDrive Method Hinge-DrivenProduct Notes• Always check with customer service for precise screen width measurement and stock status before designing a screen or ordering a belt.• Contact Hydrolox technical support for strength requirements, frame guidelines, etc.• Flush edges with recessed rods prevent edge damage and rod migration.• Made of corrosion-resistant polymer.• A T20 Torx driver is needed to remove the screw that holds the endcap to the belt edge.• Minimum sprocket spacing distance is 2 in. (50.8 mm) and is recommended for an adjusted belt pull greater than 1500 lb/ft (2232 kg/m). Maximum sprocket spacing distance is 6 in. (152.4 mm). A - Run DirectionBelt DataBelt Material StandardRod MaterialØ 0.31 in. (7.9 mm)Belt Strengtha Temperature Range (continuous)Belt Weightlb/ft kg/m °F °C lb/ft2 kg/m2Engineered Polymer Engineered Polymer 3000 4464 -50 to 240 -46 to 116 2.4 11.7a Belt strength of 4000 lbs/ft (5953 kg/m) for spike loads.A3.5" NOM.(88.9 mm)3.5" NOM.(88.9 mm)1.0" (25.4 mm)0.39"(9.9 mm)BS WProduct Line Extension Metal Sprocket Assembly DataNo. of Teeth (Chordal Action)Nom. Pitch Dia. in.Nom. Pitch Dia. mmNom. Outer Dia. in.Nom. Outer Dia. mmNom. Hub Width in.Nom. Hub Width mmAvailable Bore SizesU.S. Sizes Metric SizesRound in.Square in.Round mmSquare mm12 (3.412%)13.5 342.9 13.6 345.4 2.9 73.7 5, 6.253.5 127, 158.888.9Sprocket Description A B C EPitch DiameterNo. TeethRange (Bottom to Top)in. mm in. mm in. mmin. mm in. mm13.5 343 12 5.9 150 4.0 102 13.3 338 7.2 183Sprocket Spacing as a Function of Screen Strength UtilizedSPROCKET SPACING, in.PERCENT OF ALLOWABLE SCREEN STRENGTH UTILIZED, %SPROCKET SPACING, mm1 - Pitch Diameter2 - Hub Width3 - Outer Diameter123© 2013 Hydrolox 53210_EnglishProduct Line Extension Patented Boot SealIntralox's patented boot seal for the Series 6000 screen provides the best protection available to prevent aquatic life and/or debris from passing underneath the bottom of the screen. As debris flights or fish buckets rotate around the bottom of the screen, the boot seal ensures that there is no opening larger than the size of the screen mesh. 1 - Plastic Plate2 - Foam34.0"(863.6 mm)26.9"(683.3 mm)1.4"(35.6 mm)34.0"(863.6 mm)26.9"(683.3 mm)21.3"(541.0 mm)8.0"(203.2 mm)0.25"(6.35 mm) 12