Hydropneumatic Pressure Control System Application Sheet

QF 7.2 - 740 Rev. 02-2009 Hydropneumatic Pressure Control System Application Sheet PULSCO, Inc. Hydropneumatic Pressure Control System REQUESTED BY: USE A SEPARATE SHEET FOR EACH APPLICATION DATE: TO: PULSCO, Inc. FROM: 17945 Sky Park Circle, Suite G Irvine, California 92614 Ph: 949.261.1717 TF: 877.PULSCO.2 Fx: 949.975.0532 ATTN: Sales Department (sales@pulsco.com) PROJECT NAME OR END USER: OPERATING PARAMETERS: Provide the following to size the pressure tank volume: a.) Required Useable Volume (drawdown between pump starts): Gallons Cubic Feet b.) Operating Pressure Range: psig to psig OR provide a.) Total Pressure Tank Volume: Gallons Cubic Feet b.) Outside Diameter: inches PUMP DATA: Number of Pumps: Capacity of Each Pump: GPM Shut Off Head: GPM LEVEL CONTROL: Differential Pressure Transmitter with PLC Capacitance Sensor Discrete Contact Probes HYDROPNEUMATIC TANK REQUIREMENTS: Design Pressure (Maximum Allowable Working Pressure): PSIG (10% or 30 psig above maximum operating pressure) Orientation: Horizontal on saddles Vertical on legs Inlet / Outlet Connection: Size: inches Flange Rating: 150# 300# Other Location: Bottom Side End Manway: Elliptical 12x16 Elliptical 14x18 Elliptical 18x24 Circular - Dia & Flange Rating & Interior Lining: Sandblast; Coatings 1st coat: 2nd coat: (if required) Exterior Paint: Sandblast; Coatings 1st coat: 2nd coat: (if required) Pressure Control: Automatic Manual COMMENTS (SPECIAL REQUIREMENTS, ADDITIONAL DATA, ETC): INTERNAL USE ONLY PULSCO: Design / Project ENGINEER ENGINEERING MANAGER