i-Zone - Model STDi-24 - Point of use Water Detector - Brochure

The STDi-24 Point of Use water Detector is comprised of TWO components, the detector module and the point detector, connected together via a 1m jumper cable. Both the Detector Module and the Point detector are manufactured from STAREX General ABS (SD-0150) plastic. The Detector Module houses the electronic circuitry and the Point Detector houses the gold plated detection pins. The jumper cable is connected to the top of the Point Detector via a 3-pin plug & socket. Conductive fluid touching the two detection pins simultaneously will cause the detector to enter an alarm condition. Alarm status and monitoring is via a network, using a CAN bus system. An stabilizing bar is required, as a means of fixing the Point of Use detector to the floor surface.