IMA DARKFIELD Hyperspectral Imager Brochure

www.photonetc.com5795 DE GASPE AVENUE, #222MONTREAL, QUEBEC, H2S 2X3CANADAIMA FLUORESCENCETM© 2015 Photon etc. Inc. All rights reserved.TECHNICAL SPECIFICATIONSSpectral RangeSpectral ResolutionLaser*Illumination LampObjectivesCamera*Maximum Sample FormatX, Y Travel RangeZ Stage ResolutionMaximum Scanning SpeedWavelegth Absolute AccuracyVideo ModePreprocessingHyperspectral Data FormatSingle Image Data FormatSoftwareDimensionsWeight400 to 1000 nm< 2.5 nm808 nm20X, 50X, 100XFront-illuminated interline CCD camera10 cm x 10 cm76 mm x 52 mm1 150 ms0.25 nmMegapixel camera for sample vizualisationSpatial filtering, statistical tools, spectrum extraction, data normalization, spectral calibrationFITS, HDF5JPG, PNG, TIFF, CSV, PDF, SGVComputer with PHySpecTM control and analysis software included˜ 102 cm x 76 cm x 76 cm˜ 80 Kg Back-illuminated camera,EMCCDAdditional excitation wavelengths availableVIS DARKFIELD400 to 1000 nm20X, 60X, 100XFront-illuminated interline CCD cameraIROptional< 2.5 nm< 4 nm900 to 1700 nmPhoton etc.InGaAs Camera20X, 60X, 100XUPGRADES*Additional excitation wavelengths availableHigh Resolution Module: 900-1700 nm FWHM < 1 nmDedicated to life sciences, IMATM Fluo-rescence is an integrated hyperspectral fluorescence microscope perfect to study the properties of organic and inorganic samples. With the possible integration of a darkfield illumination module, it becomes an exceptional tool to also detect the composition and the location of nanomaterials embedded in cells.Epifluorescence Filter Triple Filter Fluo Optional Triple Filter Fluo Back-Illuminated camera,EMCCDHBO or XBO 100 HBO or XBO 100Optional OptionalDarkfield Module Optional Optional Oil or DryMicroscope InvertedSpatial Resolution Sub-micronIMAGER SOLAR CELL MAPPING- image courtesy of IRDEP - Magnification of a breast cancer cell (a) and spectra of GNPs in different areas (b).µmAPPLICATION© 2015 Photon etc. Inc. All rights reserved. Dark field illumination is commonly used for the analysis of biological samples containing nanomaterials that significantly scatter light. When combined to hyperspectral imaging, it becomes an exceptional tool to also detect the composition and the location of nanomaterials embedded in cells. IMATM, Photon etc.’s hyperspectral imager, can be equipped with a highly efficient dark field condenser and generate high contrast images of biological samples. The high throughput of Photon etc.’s hyperspectral filter allows the rapid acquisition of spectrally resolved high resolution images. Since the camera captures the whole area in the field of view, it is possible to collect spectral and spatial information in real time, with the possibility of recording spectrally resolved videos to follow the dynamics of cells and luminescent nanoscale components. PHySpecTM, Photon etc software, enables principal component analysis (PCA) in order to identify the smallest variations of single and aggregated nanoparticles. With the purpose of showing the capabilities of IMATM to analyse nanomaterials in biological systems, a sample of MDA-MB-23 human breast cancer cells has been tagged with 60 nm gold nanoparticles (GNPs) and exposed to a dark field illumination on the entire field of view (Figure 1). With a 60× objective, an area of 150×112 µm was imaged, with a step of 2 nm and an exposition time of 2 s per wavelength. The complete analysis took only a few minutes, for more than one million spectra, each of them covering the whole visible spectrum.IDENTIFICATION OF SINGLE NANOPARTICLES IN CANCER CELLS BY DARK FIELD HYPERSPECTRAL IMAGING Results kindly provided by: David Rioux, Éric Bergeron and Michel Meunier, at École Polytechnique, Canada. Fig. 1: Dark field image of human breast cancer cells tagged with gold nanoparticles (60 nm size)Fig. 3: Magnification of a breast cancer cell (a) and spectra of GNPs in different areas (b). Fig. 2: Monochromatic image at 550 nm. GNPs marked in green after PCACells typically have a flat scattering spectrum, whereas GNPs show a sharp peak around 550 nm. Figure 2 illustrates the 550 nm image extracted from the dark field hyperspectral cube of the breast cancer. The GNPs are marked with a green colouring after PCA software processing. The magnification of a breast cancer cell (Figure 3a) and the spectra of the regions containing GNPs (some examples in Figure 3b) confirmed the presence of single 60 nm NPs (peak at 550 nm) and their aggregates (peaks red-shifted). The hyperspectral camera did not detect any GNPs in the areas between the cells.