IMS - Model MCS Series - Skid-Mounted Carbon Adsorber - bROCHURE

The IMS Model MCS carbon adsorber is a once-through activated carbon odor removal system designed to treat hydrogen sulfide (H2S) & organic odors (VOCs) found in municipal wastewater collection systems and treatment processes. The MCS is a factory-assembled, skid-mounted odor control system complete with exhaust fan, damper, interconnecting ductwork, vessel, activated car-bon media and local control panel. All components are mounted, piped, and wired on an epoxy coated carbon steel skid. System is designed for continuous and automatic operation as well as manual operation as required. SUPERIOR PERFORMANCE MEDIAThe IMS carbon systems are designed to work with a wide selection of media: ? Virgin activated carbon media for low odor levels ? High capacity carbon for higher H2S concentrationsMCSMAJOR SYSTEM COMPONENTS ? Epoxy Coated Steel Equipment Skid ? FRP Exhaust Fan ? FRP Transition Duct ? FRP Inlet Damper ? FRP Carbon Adsorber Vessel and Exhaust Stack ? Activated Carbon Media ? Electrical Control PanelMCS Process & Instrumentation DiagramSKID-MOUNTED CARBON ADSORBER (MCS Series)© 2014 INTEGRITY MUNICIPAL SYSTEMS. ALL RIGHTS RESERVED.13135 DANIELSON STREET, SUITE 204 POWAY, CA 92064PHONE: (858) 486-1620 FAX: (858) 486-1659 www.integrityms.netHOW IT WORKSThe exhaust fan operates continuously, pulling foul air from the process area and passing it through the carbon media. A volume control damper at the system inlet allows regulation of airflow through the carbon adsorber.Inside the vessel, the foul air flows through a densely packed bed of ac-tivated carbon. The odorous compounds are removed from the airstream through a combination of physical adsorption and chemisorption. Odorous compounds are physically adsorbed in the carbon pores, and some may undergo chemical reaction to form elemental sulfur and sulfuric acid. This process continues until the activated carbon pores are filled up and the odorous compounds break through and are released out the stack. SYSTEM FEATURES & BENEFITS ? Superior non-corrosive material ? Easy to operate ? Suitable for outdoor installation ? Fan sound enclosure (Optional) ? Compact, skid-mounted design ? Pre-assembled and factory testedSTANDARD MODEL DESIGN DATA02/21/2014 Rev. 1.0ModelAirflow Rate CFM(m3/h)Overall DimensionL x W x Hft(mm)Inlet Connection Inches(mm)ShippingWeightlbs(kg)CarbonWeightlbs(kg)Fan MotorHP(kW)MCS-0150 Up to 130(Up to 220)4.3 x 3.2 x 5.0(1300 x 975 x 1500)4.0(100)940-1010(426-458)130-200(60-90)1.0(.75)MCS-0200105-235(175-400)5.3 x 3.5 x 5.0(1600 x 1000 x 1500)6.0(150)1225-1350(555-612)235-360(105-160)1.0(.75)MCS-0250185-365(315-620)5.8 x 3.8 x 5.0(1700 x 1100 x 1500)6.0(150)1570-1770(710-805)370-510(170-260)1.5(1.1)MCS-0300 290-530(490-1290)6.3 x 4.1 x 5.0(1900 x 1200 x 1500)8.0(200)1940-2230(880-1012)530-820(340-370)2.0(1.5)MCS-0350 420-720(715-1225)7.7 x 4.9 x 5.50(2300 x 1500 x 1700)8.0(200)2525-2925(1145-1327)720-1120(325-510)2.0(1.5)MCS-0400 575-940(980-1600)8.3 x 4.9 x 5.50(2500 x 1500 x 1700)10(250)3095-3605(1404-1635)940-1450(425-665)3.0(2.2)MCS-0450 750-1190(1275-2025)8.8 x 5.2 x 5.50(2500 x 1600 x 1700)10(250)3835-4495(1740-2040)1190-1850(540-840)3.0(2.2)MCS-0500 950-1400(1615-2380)9.1 x 5.6 x 5.50(2700 x 1700 x 1700)12(300)4455-5285(2020-2397)1470-2300(670-1045)3.0(2.2)