Insertion Mass Flow Meters (Single Point)- Brochure

IComplex Technology Made SimpleThe  Kurz WGF  single-point  insertion  flow meter  for wet  gas  environmentsincludes  the  qualities  and  features  found  in  all  Kurz  constant  temperaturethermal flow meters that make them outperform all other currently availablethermal mass flow meters, including:• The first thermal mass flow meter offering accurate and reliable wet gas flow measurements (patent pending)   • The highest repeatability, accuracy, and reliability available• The fastest response to temperature and velocity changes in the industry• Constant temperature thermal technology • Interchangeable sensor and electronics (single circuit board) — no matched sets• Built-in dry gas flow calculation on all flow units for saturated processes • Continuous self-monitoring electronics that verify the integrity of sensor wiring and measurements• Sensor does not overheat at zero flow using a unique constant SERIES 454FTBTECHNICAL SPECIF367533C Information subject to change without nContact or visit Kurz online for complete specifications antemperature control method and power limiting design• Zero velocity as a valid data point• Insensitive to left or right horizontal installations• Completely field configurable using the flow meter user interface or via a computer connection• User-programmable correction factors to compensate for velocity profiles• Velocity-temperature mapping for wide ranging velocity and temperature• Sensor Blockage Correction Factor (SBCF)• Patented digital sensor control circuit (US 7,418,878)    Series 454FTB-WGFInsertion Flow Meter-WGFCATIONSotice. d ordering information.The  Kurz  WGF  provides  the  solution  for  manyapplications and environments, including: • Biogas• Wastewater facilities• Landfill sites• Fogging in stacks• Fan inlets• EPA greenhouse gas emissionsKurz  Instruments  is  dedicated  to  manufacturingand marketing the best thermal mass flow metersavailable  and  to  support our  customers  in  theirefforts to improve their businesses. U.S. Patent PendingKurz Instruments, Inc.4 i• CSA, ATEX & IECEx approvals pending for Nonincendive, Flameproof, and Explosion-proof • Configuration/data accessUSB or RS-485 Modbus• Meter memorySeries 45Specifications• Velocity range0 to 4,000 SFPM (18.6 NMPS) (Air)0 to 2,000 SFPM (9.3 NMPS) (Biogas)• Dry velocity accuracy ± (1% of reading +20 SPFM)• 0.25% reading repeatability • Velocity time constant1.5 second for velocity changes at 4,000 SFPM (constant temp)• Process temperature time constant 10 seconds for temp changes at 1,000 SFPM (constant velocity)• Velocity angle sensitivity<0.25% per degree angle up to ±15o• Velocity-dependent correction factors for flow rate• Electronics operating temperature-13oF to 149oF (-25oC to 65oC) (integral display)-40oF to 149oF (-40oC to 65oC) (remote display)Process Conditions• Process pressure rating Up to 150 PSIG (10 BARg)• Process temperature rating -40oF to 248oF (-40oC to 120oC)Approvals• EPA mandatory GHG certification CFR 98.34(c)(1)• Alarm output conformityNAMUR NE43 • European Union CE compliance EMC, LVD, PED, WEEE, and ROHS. .EN IEC 60079-0, EN IEC 60079-1EN IEC 60079-15, EN IEC 61241-1,Class 1, Div 1 and 2(Select models are CSA pre-approved) FTB-WGF Technical SpecTransmitter Features• Aluminum (Type 4, IP66) dual chamber polyester powder-coated enclosure• Two optically-isolated loop-powered 4-20 mA outputs12-bit resolution and accuracyMaximum loop resistance is 300?? at 18 VDC, 550?? at 24 VDC, 1400?? at 36 VDC• One 4-20mA non-isolated analog input• Input powerAC (85-265V 47/63 Hz, 24 watts max) or DC (24V ±10%)• Integral or remote user interface• Easy-to-use interface Backlit display / keypad2-lines of 16-characters each • User-configurable flow display (scrolling or static)• User-configurable English or metric units for mass flow rate, mass velocity, and process temperature (oC, oF, KGH, KGM, NCMH, NLPM, NMPS, PPH, PPM, SCFH, SCFM, SCMH, SFPM, SLPM, SMPS) • Flow valve PID controller and configurable control applicationPermits controlling set point velocity or flow rate through available control valve, damper, or 4-20 mA interface• Built-in zero-mid-span drift check• Built-in flow totalizers and elapsed time• User-configurable digital filtering from 0 to 600 seconds200 recent events, top 20 min/max, and 56 hours (10 second samples) of trends• 3-year warranty2411 Garden RoadMonterey, CA 93940800-424-7356 / 831-646-5911www.kurzinstruments.comficationsSupport & Element Components• Sensor materialC-276 alloy all-welded sensor construction (standard) • Sensor support 316L stainless steel (standard) C-276 alloy (optional)• Sensor support diameter3/4” and 1” (19 mm and 25mm)• Sensor support length6” to 60” (152 mm to 1524 mm)• 3-year warrantyOptions• Adjustable LCD/keypad orientation• HART communicationProcess control industry standard allows remote configuration, diagnostic monitoring, and online testing with handheld configurators• Two optically isolated solid-state relays / alarmsConfigurable as alarm outputs, pulsed totalizer output, or air purge cleaning • Two digital inputs dedicated to purge and zero-mid-span drift check• Pulsed output as a remote flow totalizer• Hardware accessoriesAvailable hardware includes flanges, ball valves, restraints, retractors, cable glands, conduit seals, cable, compression fittings, packing glands, and branch fittingsSeries 454FTB-WGFInsertion Thermal Mass Flow MeterKurz Instruments, Inc.2411 Garden RoadMonterey, CA 93940800-424-7356 / 831-646-5911www.kurzinstruments.comSeries 454FTB-WGFInsertion Thermal Mass Flow Meter. .SUPPORTSENSORFITTINGVIEW A-AW/ DISPLAY & KEYPAD OPTION SHOWN INDIRECTLY ATTACHED ELECTRONICS ENCLOSURE (TA)SERIES 454FTB-WGF OUTLINE DRAWINGS DMOUNTING FLANGE (OPTIONAL)ID TAG (Optional)SENSOR SUPPORT SENSOR ULL2(NOTE 2)SHIELDED CABLE, SEALS, FITTINGS,& CONDUIT (Customer-Supplied)SERIAL NO., ITEM NO. &KURZ MODEL NO.,SAFETY APPROVAL TAG#10-32 SCREWGROUND LUGPOWER, GROUND, & OUTPUTS(5.44) [138.18mm]FLOW DIRECTIONAAARROW.88 [22.35mm]ELECTRONICSENCLOSUREDUAL CHAMBER3/4" FNPT (Typical)CAUTION LABEL3/4" MNPT PLUGCLEAR GL0SS DISPLAYREMOTELY ATTACHED(Typical)(Customer-Supplied)CONDUIT SEALS(NOTE 1)PROBE ASSEMBLY FOR(NOTE 3)ELECTRONICS ENCLOSURE (TS)REMOTELY ATTACHEDSENSOR ELECTRONICS FORELECTRONICS ENCLOSURE (TS)3/4" MNPTSHIELDED CABLE, SEALS, FITTINGS,& CONDUIT (Customer-Supplied)POWER, GROUND, & OUTPUTS PLUGELECTRONICSENCLOSUREDUAL CHAMBERSAFETY APPROVAL TAGKURZ MODEL NO.,SERIAL NO., ITEM NO. &CAUTION LABEL3/4" FNPT (Typical)W/ DISPLAY & KEYPAD OPTION (SHOWN)(NOTE 4)(NOTE 5)(NOTE 5)(NOTE 5)0.78 [19.81mm]3/4" FNPT (Typical)3/4" MNPT PLUGCAUTION LABELSENSOR WIRE TERMINALJUNCTION BOX5-CONDUCTOR SHIELDED CABLE INRIGID CONDUIT OR CABLE WITHPERIMETER BONDED SEAL (Customer-Supplied).64 [16.26mm] (5.25) [133.35mm](SEE TABLE 1)SAFETY APPROVAL TAGKURZ MODEL NO.,SERIAL NO., ITEM NO. &LCSTANDARD ORENTATIONPROBE ASSEMBLY FOR REMOTELY ATTACHEDELECTRONICS ENCLOSURE (TS)SENSOR ELECTRONICS FOR REMOTELY ATTACHEDELECTRONICS ENCLOSURE (TS) (WALL MOUNT)W/ DISPLAY & KEYPAD OPTION (SHOWN) (NOTES 5 & 6)(NOTES 5 & 6)3/4" FNPT 3/4" MNPT PLUGSENSOR WIRE TERMINALJUNCTION BOX5-CONDUCTOR SHIELDED CABLE INRIGID CONDUIT OR CABLE WITHPERIMETER BONDED SEAL (Customer-Supplied)(Typical)CLEAR GL0SS DISPLAYSAFETY APPROVAL TAGKURZ MODEL NO.,SERIAL NO., ITEM NO. &CAUTION LABEL[7.87mm x 12.70mm]4x (Typical) LCD DISPLAY(4.00)(6.50)(8.94)(8.50)(2.25)[57.15mm](2.25)[57.15mm](1.85)[46.99mm]1/2" FNPT3x (Typical)INPUTOUTPUTSINPUTSPOWER SENSOR SIGNAL (4.42)(2.00)ZONE 2 ZONE 1Ex n DESIGN[227.08mm][215.90mm][165.10mm][112.27mm][50.80mm][101.60mm]SLOT .31 x .50(NOTE 1)EXTERNAL 2.00 [50.8mm]GROUND LUGEXTERNAL #10-32 SCREWEXTERNAL GROUND LUG#10-32 SCREWEXTERNAL GROUND LUG#10-32 SCREWMASS FLOW TRANSMITTERCLEAR GL0SS DISPLAYMASS FLOW TRANSMITTERFIBERGLASS ENCLOSURETYPE 4, IP66Ex d DESIGNALUMINIUM ENCLOSURETYPE 4, IP66FLOWFLOWFLOWFLOWDISPLAY CAN BE ROTATED AT 90°INCREMENTS FOR PROPER VIEWINGDIRECTIONDISPLAY CAN BE ROTATED AT 90°INCREMENTS FOR PROPER VIEWINGDIRECTION Kurz Instruments, Inc.2411 Garden RoadMonterey, CA 93940800-424-7356 / 831-646-5911www.kurzinstruments.comSeries 454FTB-WGFInsertion Thermal Mass Flow Meter. .ELECTRONICS ENCLOSUREDUAL CHAMBER JUNCTION BOXSERIES 454FTB-WGF OUTLINE DRAWINGS (cont'd)ACAC24VDCINPUT DISPLAY / YESNOYESNO5.03 [127.76mm][110.99mm]4.373.63 [92.20mm]24VDC(SHOWN W/ WINDOW LID)3/4" MNPT3x (Typical)1.13[28.70mm]W3 W1W2CUSTOMERHOOK-UPSIDE. 3x (Typical)3/4" FNPT(NOTE 5) (NOTE 5)POWER (MIN.)3.41 [86.61mm]5.01 [127.25mm] 4.88 [123.95mm]3.16 [80.26mm]2.81 [71.37mm]3.63 [92.20mm]3.41 [86.61mm]5.01 [127.25mm]4.69 [119.13mm]N/AN/AN/AN/A N/ATABLE 2 ENCLOSURE DIMENSION (NOTE 5)MOUNTING FEETSUBJECT TOCHANGE[133.35mm]5.254.75 [120.65mm][117.09mm]4.615.03 [127.76mm]4.75 [120.65mm][110.99mm]4.37[117.09mm]4.611.06[26.90mm](NOTE 4)3.16 [80.26mm]2.81 [71.37mm]N/A N/A SENSOR WIRE TERMINAL J-BOX(FOR REMOTE OPT.)(NOTE 4)5.01 [127.25mm]4.69 [119.13mm]5.01 [127.25mm]4.69 [119.13mm]SENSOR WIRE TERMINAL KEYPAD [133.35mm]5.252) L2 (MIN.) TO BE 5.00 [127mm].NOTES:3) THIS PROBE CONFIGURATION ALSO USED FOR DIRECTLY ATTACHED,4) SENSOR WIRE TERMINIAL JUNCTION BOX USED FOR SENSOR ELECTRONICS 5) ENCLOSURE STYLES AND DIMENSIONS ARE SUBJECT TO CHANGE. DC POWERED, WITH NO DISPLAY. FOR DC POWERED, WITH NO DISPLAY. FEATURE 1 PROBE DIAMETER (D)BC0.75 [19.5mm]1.00 [25.4mm](SEE TABLE 2) (SEE TABLE 2) (SEE TABLE 2)W1 W2 W3(MAX.)(MIN.)(MAX.)(MIN.)(MAX.)6) THIS CONFIGURATIONS ALLOWS FOR PROBE ASSY TO BE MOUNTED IN ZONE 1 AREA AND FOR REMOTE ELECTRONICS TO BE MOUNTED IN ZONE 2 AREA. CLEAR GL0SS DISPLAYMASS FLOW TRANSMITTERTABLE 1 PROBE DIAMETER DIMENSION 1) FOR FLANGED OPTION: L = (U + L2 - 2.00 [50.8mm]), U (MIN.) = 4.00 [101.6mm]. 3U 4V 4” (102 mm)F5 Option Flange U DimensionEnter 000 for no flange connection. Enter U-dimension G 2,000 SFPM (9.3 NMPS)K 4,000 SFPM (18.6 NMPS) (Air only) F13 Option Calibration Type3F 4G 1” (25 mm)3J 4K 1.5” (38 mm)3L 4M 2” (51 mm)3N 4P 2.5” (64 mm)3S 4T 3” (76 mm)” and 1” robe meter1” probediameteronlyF12 Option Velocity Calibration RangeB 300 SFPM (1.4 NMPS)C 600 SFPM (2.8 NMPS)E 1,000 SFPM (4.7 NMPS)Kurz Instruments, Inc.2411 Garden RoadMonterey, CA 93940www.kurzinstruments.comSeries 454FTB-WGF Insertion Flow M756 — — — — — — — — — — — Parent Number F1 F2 F3 F4 F5                                                                                                 Parent Number Model756410 454FTB-WGFF1 Option Probe Support DiameterB 0.75” (19 mm) (6” – 36” probe length)C 1” (25 mm) (6” – 60” probe length)F2 Option Probe Support & Flange Material2 316L stainless steel3 C-276 alloyF3 Option Probe Support LengthB 6” (152 mm)C 9” (229 mm)D 12” (305 mm)F 18” (457 mm)H 24” (610 mm)J 30” (762 mm)K 36” (914 mm)M 48” (1219 mm)P 60” (1524 mm)F4 Compression Fittings or FlangesChoose one only - None, Compression Fitting, or FlangeOption Compression Fittings1A None2B 0.75” MNPT (0.75” probe only), stainless steel front and back ferrules2D 0.75” MNPT (0.75” probe only), PTFE-compound front and back ferrules2G 1” MNPT (0.75” or 1” probe), stainless steel front and back ferrules2J 1” MNPT (0.75” or 1” probe), PTFE-compound front and back ferrulesOption 1Class 150 lbs.Option 2Class 300 lbs ANSI 16.5 Flange1A 1A None3D 4E 0.75” (19 mm) 0.75pdia4 1 0— — — to nearest 10th of an inch without a decimal point. For example, 7.7” is 077 and 23.6” is 236. Note: Convert metric units to English units.Toll free 800-424-7356 Main 831-646-5911Fax 831-646-8901sales@kurzinstruments.cometer Order Configuration    — — — — — — — — —F6 F7 F8 F9 F10 F11 F12 F13F6 Option Electronics Configuration(Approvals Pending, select models CSA Certified Explosion Proof)AIntegral - Standard Display viewingAluminum Type 4, IP66 enclosureExplosion-Proof / Flame-Proof, CSA, ATEX, and IECExEx d IIB + H2 Gb, T6, T4, T110oC or T130oC (electronics encl.)Ex d IIB + H2 Gb, T4 or T3 (sensing element)EIntegral - Display rotated 180o for viewingAluminum Type 4, IP66 enclosureExplosion-Proof / Flame-Proof, CSA, ATEX, and IECExEx d IIB + H2 Gb, T6, T4, T110oC or T130oC (electronics encl.)Ex d IIB + H2 Gb, T4 or T3 (sensing element)JRemote - Transmitter and sensing element separate Aluminum Type 4, IP66 enclosuresExplosion-Proof / Flame-Proof, CSA, ATEX, and IECExEx d IIB + H2 Gb, T6, T4, T110oC or T130oC (electronics encl.)Ex d IIB + H2 Gb, T4 or T3 (sensing element)F7 Option Keypad/Display1 Keypad / Display2 BlindF8 Option PowerA AC (85-265V 47/63 Hz, 24 watts max)D DC (24V ±10%)F9 Option Analog and Digital Inputs/Outputs2 Standard Two 4-20 mA isolated outputs3 FullTwo 4-20 mA isolated outputs, two relays, two digital inputs, one non-isolated 4-20 mA input 5 HARTHART communication protocol, one 4-20 mA isolated output, two relays, two digital inputs, one non-isolated 4-20 mA input F10 Option Gas TypeA Air (laboratory calibration only)D Biogas (methane and carbon dioxide mix)Y Customer specifiedF11 Option Percent of Methane— —Enter two digits for percent of methane.Enter two zeros (00) for Air only.Enter YY for all other gases. 1 Correlation 2 Laboratory Series 454FTB-WGF Technical Specifications