Intelligent Wireless SCADA Distributed RTU System - Data Sheet

DESCRIPTION The Intelligent Wireless System (IWS) nodes are part of a range of distributed wireless products from Wireless Options providing advanced supervisory, control and data acquisition (SCADA) functionality. With 'out the box' auto mesh wireless functionality IWS nodes can be easily installed at the remote location and connected to standard sensors, supporting 4-20mA or 0-5V. Either directly, or automatically through a series of other IWS nodes the sensor data is relayed back to the IWS Hub for connection over Ethernet to the IWS Management Server (MS) application for display, logging and alarm management. A network of IWS nodes can scale to over 1000 nodes and be supported by one or more IWS Hubs. In addition to the basic IWS node supporting up to 4 standard SCADA inputs, several variants are available, offering output controls through either dry relay and 4-20mA current transmitter to facilitate motor or other analog peripheral controls All IWS nodes can be provided to include local powering options. These include battery (primary or backup), solar and micro generator options such as from induction and vibration sources. The IWS MS application provides a single point for managing the IWS sensors. Additionally, the IWS MS provides standard interfaces such as Modbus, DNP3 and IEC 60870 to other systems ORDERING INFO Part Number Description Comments IWS-R-200 Intelligent wireless System Node (Remote), 2 x 4-20mA input, includes antenna and pole mounting U brackets IWS-R-220 Intelligent wireless System Node, (Remote), 2 x 4-20mA, 2 x 0-5V input, includes antenna and pole mounting U brackets IWS-R-222 Intelligent wireless System Node, (Remote), 2 x 4-20mA, 2 x 0-5V input + 2 dry relay output, includes antenna and pole mounting U brackets IWS-H-000 Intelligent wireless System Node (Hub, includes antenna and pole mounting U brackets) IWS-MS Intelligent Wireless System Management Server Application PS-01 110V-220V AC input, 18V DC 1A output power adapter BA-01 12V 1.4Ah Sealed lead acid backup battery kit complete with bracket, screws and cable Intelligent Wireless SCADA Distributed RTU System Features and Benefits • Next generation distributed, intelligent wireless SCADA system • Accepts standard SCADA voltage and current loop sensors • Reliable & scalable auto mesh • No wiring needed • Ultra low power • Full monitoring, control and back office Support • Low cost & fast install • Rugged construction (NEMA6) for all weather conditions SPECIFICATIONS Radio Specifications Wireless Topology Auto Mesh with dynamic configuration Frequency 2.4 GHz ISM Band Channels 16 Hops 30 max. Power Output +18dBm (antenna port), +23dBm max. EIRP with antenna supplied RX Sens -102 @ 10-6 BER RF Data Rate 250 kbps - Indoor Range up to 100m Outdoor LOS Range up to 1.0 km Power (with current loop) IWS-R-200/220 IWS-R-222 IWS-M-111 IWS-H-000 (Hub) Supply Voltage Max. Power (Transmit Active) Max. Power (Idle/Receive) 11.5V-18V DC or 24V AC/DC 1440mW 500mW 11.5V-18V DC or 24V AC/DC 12V DC Internal NiMH Batttery 11.5-18V DC (power adapter with PoE combiner) or 24v AC/DC 1100mW 1000mW Power Supply (without current loop) IWS-R-200/220 IWS-R-222 IWS-M-111 IWS-H-000 (Hub) Supply Voltage Transmit Power (Typ) Idle/Receive Power (Typ) Avg. Power 11.5V-18V DC or 24v AC/DC 360mW 165mW 5mW (@ 30 sec. wakeup cycle) 11.5V-18V DC or 24v AC/DC 11.5-18V DC (power adapter with PoE combiner) or 24v AC/DC 1100mW 1000mW I/O IWS-R-200/220 IWS-R-222 IWS-M-111 IWS-H-000 (Hub) 2 x 4-20mA loop 1 x 0-5V DC input 1 x 0-5V or 0-3V analog input or pulse input 2 x 4-20mA loop 1 x 0-5V DC input 1 x 0-5V or 0-3V analog input or DC pulse input 2 x dry relay SPDT contacts 1 x 4-20mA loop transmitter Mobile Water Depth Test System 0-50ft 16 x 2 LCD Display Internal pump & differential pressure sensor Accuracy to +-3" 2 x 4-20mA loop receiver 1 x 0-5V DC analog input 1 x 0-5V or 0-3V analog input or pulse input 10/100BT Ethernet (RJ45) Security Radio Access Username and Password protected Data Scrambling AES 128bit (optional) Management IMS- MS Stand alone local or remote graphic display with SMS & email alarms Modbus support and IEC 80750 Supported on Windows XP; Windows XP Prof Physical, Electrical & Environmental Mounting Bracket Pole (1-1/2" or 2") or direct wall mount Operating Temperature -40C to +55C Relative Humidity 0-100% (non condensing) Certifications 802.15.4 (2.4GHz) FCC: U9O-RFET, IC: 7084A-RFET Enclosure 7-1/8' (w) x 10" (h) x 2-1/4" (d) (180mm x 254mm x 57mm) Weight 50oz (1.5kg) (approx)