Iron & Steel Industry Emissions Monitoring & Analysis - Brochure

aerospaceclimate controlelectromechanical? ltration? uid & gas handlinghydraulicspneumaticsprocess controlsealing & shieldingEmissions Monitoring in the Iron & Steel IndustriesProcal analysers are used throughout the steel process from initial sintering of ore, coke production & blast furnace emissions, through to roll-mill reheat furnace emissions. Of particular concern in this application are very high particulate loading and extreme temperatures both in the gas flux and ambient.Gases can often be both in high concentrations and highly corrosive. The combination of reliability, corrosion resistance and flexibility of application enables the multi-component, in situ analyser to meet the requirements of the end-user and local Environmental Agencies.The Procal 2000 analyser range is well suited to applications with a high dust load. Patented sintered filter technology is used to pre-clean the sample gas. No maintenance is required during operation and there are no additional consumables, ensuring a simple and well tested solution offering up-time for control of your plant.Gases of interest and concentrations typically cover:A proven track record of reliability in high dust load environments:© 2014 Parker Hannifin Corporation 7-3223-02011Iron & Steel Emissions MonitoringCoking plantNOx 0-600 ppmCO 0-1500 ppmSinter plantSO2 0 – 500 ppmNO 0 – 400 ppmH2O 0 – 15%CO 0 – 7000 ppmNH3 0 – 100 ppmReheat furnaceSO2 0-1200 ppmNO 0-500 ppmCO 0-500 ppmRolling Mill:NO 0 – 500 ppmCO 0 – 500 ppmCO2 0 – 1200 ppmSinter Plant:NO 0 – 600 mg/Nm3SO2 0 – 300 mg/Nm3NH3 0 – 100 mg/Nm3Parker ProcalHydraulic Filter Division EuropeEmission Monitoring Centre5 Maxwell Road Peterborough PE2 7HUUnited KingdomTel: +44 (0)1733 232495Fax: +44 (0)1733 235255Email: procalsales@parker.comWeb: www.procal.com www.parker.comDistributed by: